Assessment and optimization of cutting parameters while turning AISI 52100 steel

被引：0
|
作者：
Sharma, Vishal S. [1 ]
Dhiman, Suresh [2 ]
Sehgal, Rakesh [2 ]
Sharma, Surinder Kumar [3 ]
机构：
[1] Natl Inst Technol, Dept Ind Engn, Jalandhar 144011, PB, India
[2] Natl Inst Technol, Dept Mech Engn, Hamirpur 177001, HP, India
[3] Natl Inst Technol, Dept Mech Engn, Kurukshetra 132118, Haryana, India
来源：
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2008年 / 9卷 / 02期
关键词：
cutting forces; tool tip temperature; surface roughness;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This investigation deals with machining AISI 52100 steel using a carbide-coated tool. The machining cutting force and tool tip temperature are measured online while turning using different cutting parameters. The surface roughness is also measured, but off-line after each cut. The obtained data are analyzed and the influence of the cutting parameters on the machining variables is determined in the form of plots. Regression models obtained from the results are tested using additional experimental data.
引用
收藏
页码：54 / 62
页数：9
相关论文
共 50 条
  • [1] Multi-objective optimization of cutting parameters for turning AISI 52100 hardened steel
    Serra, R.
    Chibane, H.
    Duchosal, A.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (5-8): : 2025 - 2034
  • [2] Multi-objective optimization of cutting parameters for turning AISI 52100 hardened steel
    R. Serra
    H. Chibane
    A. Duchosal
    [J]. The International Journal of Advanced Manufacturing Technology, 2018, 99 : 2025 - 2034
  • [3] Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel
    Keblouti, Ouahid
    Boulanouar, Lakhdar
    Azizi, Mohamed Walid
    Yallese, Mohamed Athmane
    [J]. STRUCTURAL ENGINEERING AND MECHANICS, 2017, 61 (04) : 519 - 526
  • [4] EXPERIMENTAL ASSESSMENT AND TOPSIS OPTIMIZATION OF CUTTING FORCE, SURFACE ROUGHNESS, AND SOUND INTENSITY IN HARD TURNING OF AISI 52100 STEEL
    Rafighi, Mohammad
    Ozdemir, Mustafa
    Sahinoglu, Abidin
    Kumar, Ramanuj
    Das, Sudhansu Ranjan
    [J]. SURFACE REVIEW AND LETTERS, 2022, 29 (11)
  • [5] Optimization of the Cutting Parameters Affecting the Turning of AISI 52100 Bearing Steel Using the Box-Behnken Experimental Design Method
    Yildiz, Aytac
    Ugur, Levent
    Parlak, Ismail Enes
    [J]. APPLIED SCIENCES-BASEL, 2023, 13 (01):
  • [6] Optimization of cutting parameters of turning for hardness of AISI 4140 alloy steel
    Sharan, Gyanesh
    Patel, Rabindra Kumar
    [J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3582 - 3589
  • [7] Modeling and Optimization of Multiple Characteristics in the AISI 52100 Hardened Steel Turning
    de Freitas Gomes, Jose Henrique
    de Paiva, Anderson Paulo
    Ferreira, Joao Roberto
    da Costa, Sebastiao Carlos
    de Paiva, Emerson Jose
    [J]. MODELLING OF MACHINING OPERATIONS, 2011, 223 : 545 - 553
  • [8] Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel
    Bartarya, Gaurav
    Choudhury, S. K.
    [J]. FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 651 - 656
  • [9] Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel
    Azizi, Mohamed Walid
    Belhadi, Salim
    Yallese, Mohamed Athmane
    Mabrouki, Tarek
    Rigal, Jean-Francois
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (12) : 4105 - 4114
  • [10] Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel
    Mohamed Walid Azizi
    Salim Belhadi
    Mohamed Athmane Yallese
    Tarek Mabrouki
    Jean-François Rigal
    [J]. Journal of Mechanical Science and Technology, 2012, 26 : 4105 - 4114
12345