Design, Fabrication, and Characterization of Dense Compressible Microinterconnects

被引:15
|
作者
Jo, Paul K. [1 ]
Zia, Muneeb [1 ]
Gonzalez, Joe L. [1 ]
Oh, Hanju [1 ]
Bakir, Muhannad S. [2 ]
机构
[1] Georgia Inst Technol, Elect & Comp Engn Dept, Atlanta, GA 30332 USA
[2] Georgia Technol, Sch Elect & Comp Engn, Atlanta, GA 30332 USA
关键词
3-D IC; interconnect; microelectromechanical system (MEMS); microspring; multichips; packaging; probe tip; temporary interconnection; MECHANICALLY FLEXIBLE INTERCONNECTS; INTEGRATION; SEA;
D O I
10.1109/TCPMT.2017.2688281
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper presents gold passivated NiW compressible microinterconnects (CMIs) with 75 mu m height and 150 mu m in-line pitch. The CMIs are batch fabricated using CMOS-compatible processes. The fabricated CMIs have a measured compliance of up to 13.12 mm/N and demonstrate 45 mu m elastic vertical range of motion. Moreover, the CMIs are shown to return to their original geometrical profile after several deflections and consequently are able to maintain contact with their corresponding pads at all times. The measured four-point resistance of a CMI, which includes contact resistance, is as low as 176.3 m Omega.
引用
收藏
页码:1003 / 1010
页数:8
相关论文
共 50 条
  • [21] Design, fabrication and characterization of force sensors for nanorobot
    Domanski, K
    Janus, P
    Grabiec, P
    Perez, R
    Chaillet, N
    Fahlbusch, S
    Sill, A
    Fatikow, S
    MICROELECTRONIC ENGINEERING, 2005, 78-79 : 171 - 177
  • [22] Photon nanojet lens: design, fabrication and characterization
    Xu, Chen
    Zhang, Sichao
    Shao, Jinhai
    Lu, Bing-Rui
    Mehfuz, Reyad
    Drakeley, Stacey
    Huang, Fumin
    Chen, Yifang
    NANOTECHNOLOGY, 2016, 27 (16)
  • [23] Design, fabrication and thermal characterization of a magnetocaloric microcooler
    Kim, S.
    Ghirlanda, S.
    Adams, C.
    Bethala, B.
    Sambandam, S. N.
    Bhansali, S.
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2007, 31 (6-7) : 717 - 727
  • [24] DESIGN, FABRICATION, AND CHARACTERIZATION OF A PNEUMATIC MICRO ACTUATOR
    Gandhi, Prasanna S.
    Savalia, Anand
    Shah, Himani
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 11, 2012, : 455 - 461
  • [25] Inductive antenna stent: design, fabrication and characterization
    Mohammadi, Abdolreza Rashidi
    Ali, Mohamed Sultan Mohamed
    Lappin, Derry
    Schlosser, Colin
    Takahata, Kenichi
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2013, 23 (02)
  • [26] Advancing MRI capacitors: Design, fabrication, and characterization
    Jebri, Zaineb
    Ali, Mahfoudh Taleb
    Juergen, Nistler
    JOURNAL OF ENGINEERING-JOE, 2024, 2024 (03):
  • [27] Design, fabrication and characterization of indefinite metamaterials of nanowires
    Yao, Jie
    Wang, Yuan
    Tsai, Kun-Tong
    Liu, Zhaowei
    Yin, Xiaobo
    Bartal, Guy
    Stacy, Angelica M.
    Wang, Yuh-Lin
    Zhang, Xiang
    PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2011, 369 (1950): : 3434 - 3446
  • [28] Design, fabrication, and characterization of InSb Avalanche Photodiode
    Abautret, J.
    Evirgen, A.
    Perez, J. P.
    Christol, P.
    Rouvie, A.
    Cluzel, R.
    Cordat, A.
    Rothman, J.
    QUANTUM SENSING AND NANOPHOTONIC DEVICES XI, 2014, 8993
  • [29] Stamping Platinum Electrodes - Design, Fabrication, and Characterization
    Jedlinska, Katarzyna
    Eidenschink, Johannes
    Matysik, Frank-Michael
    Bas, Boguslaw
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2024, 171 (07)
  • [30] Design, Fabrication, and Characterization of Graded Transition Joints
    Sridharan, N.
    Cakmak, E.
    Jordan, B.
    Leonard, D.
    Peter, W. H.
    Dehoff, R. R.
    Gandy, D.
    Babu, S. S.
    WELDING JOURNAL, 2017, 96 (08) : 295S - 306S