Microcirculation of air leakage of gob-side coal pillar in fully-mechanized face

被引:0
|
作者
Zhu, H. Q. [1 ]
Zhu, S. H. [1 ]
Feng, S. L. [1 ]
Jia, G. W. [1 ]
机构
[1] China Univ Min & Technol Beijing, Beijing, Peoples R China
关键词
D O I
暂无
中图分类号
TD [矿业工程];
学科分类号
0819 ;
摘要
Microcirculation of air leakage among the gob behind the working face, the gob-side coal pillar and the adjacent gob is investigated theoretically by nonlinear seepage equation. The 2D model is built containing two gobs with heterogeneous porosity distribution and one gob-side coal pillar. Velocity field and streamline distribution of the microcirculation are simulated by the commercial code Fluent. Causes of the microcirculation are also discussed. The results show that fresh air flows into the gob behind the working face, and penetrates into the adjacent gob through the gob-side coal pillar. Microcirculation of air leakage increases air volume that flows into the gob and promotes the spontaneous combustion of residual coal. Gob breathe is also initiated by the oxidation process in which the consumption and supplement of oxygen alternates and thus results in the fluctuation of concentration of CO and O-2.
引用
收藏
页码:1023 / 1027
页数:5
相关论文
共 50 条
  • [41] Numerical research on reasonable width of coal pillar in the double gob-side entries
    Si, Xin-Yan
    Wang, Wen-Qing
    Shao, Wen-Gang
    Si, X.-Y. (qymkswgt@163.com), 1600, China University of Mining and Technology (29): : 215 - 219
  • [42] Reasonable Coal Pillar Width and Control Technology for Gob-Side Entry Driving in Deep Irregular Working Face
    Yin, Shuaifeng
    Zhao, Xubo
    Wang, En
    Yan, Yitao
    Han, Kanglei
    Ma, Jun
    Wang, Yibo
    PROCESSES, 2025, 13 (01)
  • [43] Optimization of the fully-mechanized stoping face length and efficiency in a coal mine
    A. A. Ordin
    A. A. Metel’kov
    Journal of Mining Science, 2013, 49 : 254 - 264
  • [44] Analyzing on air-leakage condition of gate in fully-mechanized long-wall top-coal caving mining face
    Guo, Xingming
    Xu, Jingcai
    Hui, Shien
    Meitan Xuebao/Journal of China Coal Society, 2000, 25 (06): : 619 - 623
  • [45] Application of Loose Blasting in Fully-Mechanized Coal Face Crossing Faults
    Li Wei
    Yang Renshu
    CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING, PTS 1-4, 2014, 838-841 : 1880 - 1883
  • [46] The rational width of the support body of gob-side entry in fully mechanized backfill mining
    Zhang, Ji-Xiong
    Jiang, Hai-Qiang
    Miao, Xie-Xing
    Zhou, Nan
    Zan, Dong-Feng
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2013, 30 (02): : 159 - 164
  • [47] Optimization of the fully-mechanized stoping face length and efficiency in a coal mine
    Ordin, A. A.
    Metel'kov, A. A.
    JOURNAL OF MINING SCIENCE, 2013, 49 (02) : 254 - 264
  • [48] Strata behavior at fully-mechanized coal mining and solid backfilling face
    Yin, Wei
    Chen, Zhiwei
    Quan, Kai
    Mei, Xiancheng
    SPRINGERPLUS, 2016, 5
  • [49] The Fuzzy Control Forecast of Fully-Mechanized Coal Face Production Capacity
    WANG Lian\|guo\ \ WANG Yu\|zhen Res. Ins. of Systems Eng.
    Journal of Systems Science and Systems Engineering, 1999, (03) : 306 - 310
  • [50] MINING A FULLY-MECHANIZED COAL FACE WITH 180 degree TURNING.
    Zhou, Louping
    Yang, Jingzai
    Coal Science and Technology (Peking), 1984, (04): : 2 - 6