A study of atmospheric-pressure CHF3/Ar plasma treatment on dielectric characteristics of polyimide films

被引:15
|
作者
Park, Soo-Jin [1 ]
Lee, Eun-Jung [1 ]
Kim, Byung-Joo [2 ]
机构
[1] Inha Univ, Dept Chem, Inchon 402751, South Korea
[2] Univ Sci & Technol, Dept Green Chem & Environm Biortechnol, Taejon 305600, South Korea
关键词
polyimide film; atmospheric-pressure CHF3/Ar plasma; fluorine; deformation; polarizability;
D O I
10.1016/j.jcis.2007.08.003
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this work, the influence of atmospheric-pressure CHF3/Ar plasma treatment on surface dielectric properties of polyimide films was investigated using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The dielectric characteristics of the films were studied using a dielectric spectrometer. From the results, it was found that the plasma treatment introduced fluorine functional groups onto the polyimide surfaces. F-1s/C-1s ratios of the polyimides were enhanced with the increase of plasma treatment time. Consequently, the fluorine groups led to a decrease of the surface free energy and dielectric constant of the polyimide films, which can largely be attributed to the decrease of the deformation polarizability or London dispersive component of surface free energy of the solid surface studied. (C) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:365 / 369
页数:5
相关论文
共 50 条
  • [41] Surface Treatment of Hydrophobic Polymers by Atmospheric-Pressure Plasma
    Iriyama, Yu
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2010, 23 (04) : 599 - 603
  • [42] A Microfluidic Atmospheric-Pressure Plasma Reactor for Water Treatment
    Laila Patinglag
    David Sawtell
    Alex Iles
    Louise M. Melling
    Kirsty J. Shaw
    Plasma Chemistry and Plasma Processing, 2019, 39 : 561 - 575
  • [43] First principles study of Si etching by CHF3 plasma source
    Wang, Weichao
    Cha, Pil-Ryung
    Lee, Sang Ho
    Kim, Gyoodong
    Kim, Moon J.
    Cho, Kyeongjae
    APPLIED SURFACE SCIENCE, 2011, 257 (21) : 8767 - 8771
  • [44] Deposition of silicon dioxide films with an atmospheric-pressure plasma jet
    Babayan, SE
    Jeong, JY
    Tu, VJ
    Park, J
    Selwyn, GS
    Hicks, RF
    PLASMA SOURCES SCIENCE & TECHNOLOGY, 1998, 7 (03): : 286 - 288
  • [45] Dry etching characteristics of TiN film using Ar/CHF3, Ar/Cl2, and Ar/BCl3 gas chemistries in an inductively coupled plasma
    Tonotani, J
    Iwamoto, T
    Sato, F
    Hattori, K
    Ohmi, S
    Iwai, H
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2003, 21 (05): : 2163 - 2168
  • [46] Wettability of Polymeric Materials after Dielectric Barrier Discharge Atmospheric-pressure Plasma Jet Treatment
    Kwiatkowski, Michal
    Terebun, Piotr
    Mazurek, Pawel
    Pawlat, Joanna
    SENSORS AND MATERIALS, 2018, 30 (05) : 1207 - 1212
  • [47] Oxide via etching in a magnetically enhanced CHF3/CF4/Ar plasma
    Kim, B
    Kwon, SK
    SOLID-STATE ELECTRONICS, 2003, 47 (10) : 1799 - 1803
  • [48] Plasma Etching Behavior of YOF Coating Deposited by Suspension Plasma Spraying in Inductively Coupled CHF3/Ar Plasma
    Lee, Seungjun
    Lee, Jaehoo
    Kim, Woongsik
    Hwang, Nong-Moon
    COATINGS, 2020, 10 (11) : 1 - 11
  • [49] Effect of Atmospheric-Pressure Plasma Treatment on the Adhesion Characteristics of a Flexible Copper Clad Laminate
    Noh, Bo-In
    Jo, Jung-Rae
    Jung, Seung-Boo
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2009, 54 (03) : 1217 - 1222
  • [50] CALCULATION OF THERMODYNAMIC PROPERTIES AND AR-N2 AND AR-NH3 PLASMA TRANSPORT AT ATMOSPHERIC-PRESSURE
    ELCHINGER, MF
    PATEYRON, B
    DELLUC, G
    FAUCHAIS, P
    JOURNAL DE PHYSIQUE, 1990, 51 (18): : C53 - C510