A study of atmospheric-pressure CHF3/Ar plasma treatment on dielectric characteristics of polyimide films

被引:15
|
作者
Park, Soo-Jin [1 ]
Lee, Eun-Jung [1 ]
Kim, Byung-Joo [2 ]
机构
[1] Inha Univ, Dept Chem, Inchon 402751, South Korea
[2] Univ Sci & Technol, Dept Green Chem & Environm Biortechnol, Taejon 305600, South Korea
关键词
polyimide film; atmospheric-pressure CHF3/Ar plasma; fluorine; deformation; polarizability;
D O I
10.1016/j.jcis.2007.08.003
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this work, the influence of atmospheric-pressure CHF3/Ar plasma treatment on surface dielectric properties of polyimide films was investigated using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The dielectric characteristics of the films were studied using a dielectric spectrometer. From the results, it was found that the plasma treatment introduced fluorine functional groups onto the polyimide surfaces. F-1s/C-1s ratios of the polyimides were enhanced with the increase of plasma treatment time. Consequently, the fluorine groups led to a decrease of the surface free energy and dielectric constant of the polyimide films, which can largely be attributed to the decrease of the deformation polarizability or London dispersive component of surface free energy of the solid surface studied. (C) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:365 / 369
页数:5
相关论文
共 50 条
  • [21] Surface treatment of polyimide using atmospheric pressure dielectric barrier discharge plasma
    Riyanto, Edy
    SCIENCEASIA, 2020, 46 (04): : 444 - 449
  • [22] Inductively coupled plasma etching of LiTaO3 in CHF3/Ar plasmas
    Zhong, Z. Q.
    Chen, Z. G.
    Luo, W. B.
    Cao, M. C.
    Wang, S. Y.
    Li, N. H.
    FERROELECTRICS, 2022, 600 (01) : 24 - 34
  • [23] Etching characteristics of SrBi2Ya2O9 film with Ar/CHF3 plasma
    Seo, JW
    Lee, DH
    Lee, WJ
    Yu, BG
    Kwon, KH
    Yeom, GY
    Chang, EG
    Kim, CI
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 2000, 18 (04): : 1354 - 1358
  • [24] Study of the boron-phosphorous doped and undoped silicate glass etching in CHF3/Ar plasma
    Abatchev, MK
    Lee, CK
    Jung, CO
    Koh, YB
    Lee, MY
    PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON PLASMA PROCESSING, 1996, 96 (12): : 522 - 530
  • [25] Spectroellipsometric analysis of CHF3 plasma-polymerized fluorocarbon films
    Easwarakhanthan, T.
    Beyssen, D.
    Le Brizoual, L.
    Bougdira, J.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2006, 24 (04): : 1036 - 1043
  • [26] Sustainable atmospheric-pressure plasma treatment of cellulose triacetate (CTA) films for electronics
    Sun, Xiaohang
    Bourham, Mohamed
    Barrett, Devin G.
    Pal, Lokendra
    McCord, Marian
    JOURNAL OF APPLIED PHYSICS, 2020, 128 (07)
  • [27] ETCHING CHARACTERISTICS OF SIO2 IN CHF3 GAS PLASMA
    TOYODA, H
    KOMIYA, H
    ITAKURA, H
    JOURNAL OF ELECTRONIC MATERIALS, 1980, 9 (03) : 569 - 584
  • [28] Treatment of Ribonucleoside Solution With Atmospheric-Pressure Plasma
    Zhang, Xianhui
    Zhou, Renwu
    Zhou, Rusen
    Chen, Maodong
    Li, Jiangwei
    Sun, Yue
    Chen, Qiang
    Yang, Size
    Liu, Qing Huo
    PLASMA PROCESSES AND POLYMERS, 2016, 13 (04) : 429 - 437
  • [29] Spectroscopy diagnostic of dual-frequency capacitively coupled CHF3/Ar plasma
    Liu, Wen-Yao
    Du, Yong-Quan
    Liu, Yong-Xin
    Liu, Jia
    Zhao, Tian-Liang
    Xu, Yong
    Li, Xiao-Song
    Zhu, Ai-Min
    Wang, You-Nian
    PHYSICS OF PLASMAS, 2013, 20 (11)
  • [30] Synthesis of Polystyrene Thin Films by Means of an Atmospheric-Pressure Plasma Torch and a Dielectric Barrier Discharge
    Merche, Delphine
    Poleunis, Claude
    Bertrand, Patrick
    Sferrazza, Michele
    Reniers, Francois
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2009, 37 (06) : 951 - 960