Study on accurate tool wear monitoring based on acoustic emission signal

被引：0
|
作者：
Cui Yinhu [1 ]
Wang Guofeng [1 ]
Peng Dongbiao [1 ]
Feng Xiaoliang [1 ]
Zhang Lu [1 ]
Liu Chang [1 ]
机构：
[1] Tianjin Univ, Sch Mech Engn, Tianjin 300072, Peoples R China
来源：
FOURTH INTERNATIONAL SEMINAR ON MODERN CUTTING AND MEASUREMENT ENGINEERING | 2011年 / 7997卷
关键词：
acoustic emission; wavelet packet decomposition; tool wear monitoring;
D O I：
10.1117/12.888609
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper presents an experimental study of the application of acoustic emission (AE) signal for tool wear monitoring in the milling of Ti-6Al-4V alloy. Experiments were conducted and the corresponding AE signals were captured under different tool wear status. Initial analysis reveals that the AE signal contains useful information about the mechanism of the tool wear and can reflect the changing of the cutting parameters as well which show that the AE signal can be used as a reliable means for accurate tool wear monitoring. The comparison with other kinds of sensor signals also shows that the AE signal is more suitable for online tool wear monitoring in industrial environment. Based on these conclusions, AE signal can be used as a reliable signal for accurate tool wear monitoring.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Acoustic Emission Monitoring during Turning of Metal Matrix Composite and Tool Wear
    Mukhopadhyay, C. K.
    Venugopal, S.
    Jayakumar, T.
    Nagarajan, R.
    Mannan, S. L.
    Raj, Baldev
    MATERIALS EVALUATION, 2006, 64 (03) : 323 - 330
  • [32] Wear monitoring of single point cutting tool using acoustic emission techniques
    Kulandaivelu P.
    Kumar P.S.
    Sundaram S.
    Sundaram, S. (sundaram1160@gmail.com), 1600, Springer (38): : 211 - 234
  • [33] Acoustic emission monitoring during turning of metal matrix composite and tool wear
    Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam-603 102, Tamil Nadu, India
    Mater Eval, 2006, 3 (323-330):
  • [34] Grinding Wheel Wear Experiment Based on Acoustic Emission Monitoring
    Yin G.-Q.
    Wang D.
    Guan Y.-Y.
    Wang J.-H.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2022, 43 (08): : 1127 - 1133
  • [35] A study of diamond grinding wheel wear condition monitoring based on acoustic emission signals
    Liu, Zihao
    Chen, Bing
    Xu, Hu
    Liu, Guoyue
    Ou, Wenchu
    Wu, Jigang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (9-10): : 4367 - 4385
  • [36] Wavelet packet analyses of acoustic emission signal for tool wear in high speed milling
    Wu, Shunxing
    Li, Pengnan
    Yan, Zhihui
    Zhang, Lina
    Qiu, Xinyi
    Yang, Jin
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 600 - 605
  • [37] TOOL WEAR ESTIMATION IN DRILLING USING ACOUSTIC EMISSION SIGNAL BY MULTIPLE REGRESSION AND GMDH
    Sudev, L. J.
    Ravindra, H. V.
    IMECE 2008: MECHANICAL SYSTEMS AND CONTROL, VOL 11, 2009, : 97 - 106
  • [38] Study of AE signal for Tool Wear Monitoring in Micro Milling Based on LVQ Algorithm
    Yen, Chia-Liang
    Lu, Ming-Chyuan
    Chen, Jau-Liang
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 719 - 725
  • [39] Tool wear evaluation in drilling by acoustic emission
    Gomez, Martin P.
    Hey, Alfredo M.
    Ruzzante, Jose E.
    D'Attellis, Carlos E.
    INTERNATIONAL CONGRESS ON ULTRASONICS, PROCEEDINGS, 2010, 3 (01): : 819 - 825
  • [40] Acoustic emission signals for tool wear identification
    Dolinsek, S
    Kopac, J
    WEAR, 1999, 225 : 295 - 303
12345