Study on accurate tool wear monitoring based on acoustic emission signal

被引：0
|
作者：
Cui Yinhu [1 ]
Wang Guofeng [1 ]
Peng Dongbiao [1 ]
Feng Xiaoliang [1 ]
Zhang Lu [1 ]
Liu Chang [1 ]
机构：
[1] Tianjin Univ, Sch Mech Engn, Tianjin 300072, Peoples R China
来源：
FOURTH INTERNATIONAL SEMINAR ON MODERN CUTTING AND MEASUREMENT ENGINEERING | 2011年 / 7997卷
关键词：
acoustic emission; wavelet packet decomposition; tool wear monitoring;
D O I：
10.1117/12.888609
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper presents an experimental study of the application of acoustic emission (AE) signal for tool wear monitoring in the milling of Ti-6Al-4V alloy. Experiments were conducted and the corresponding AE signals were captured under different tool wear status. Initial analysis reveals that the AE signal contains useful information about the mechanism of the tool wear and can reflect the changing of the cutting parameters as well which show that the AE signal can be used as a reliable means for accurate tool wear monitoring. The comparison with other kinds of sensor signals also shows that the AE signal is more suitable for online tool wear monitoring in industrial environment. Based on these conclusions, AE signal can be used as a reliable signal for accurate tool wear monitoring.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Tool Wear Monitoring In Milling Processes Based on Time-Frequency Analysis of Acoustic Emission
    Zhang, Lu
    Wang, Guofeng
    Qin, Xuda
    Feng, Xiaoliang
    FUNCTIONAL MANUFACTURING AND MECHANICAL DYNAMICS II, 2012, 141 : 574 - 577
  • [22] Tool wear monitoring and prediction based on sound signal
    Meng-Kun Liu
    Yi-Heng Tseng
    Minh-Quang Tran
    The International Journal of Advanced Manufacturing Technology, 2019, 103 : 3361 - 3373
  • [23] Tool wear monitoring and prediction based on sound signal
    Liu, Meng-Kun
    Tseng, Yi-Heng
    Minh-Quang Tran
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (9-12): : 3361 - 3373
  • [24] Identification of tool wear using acoustic emission signal and machine learning methods
    Twardowski, Pawel
    Tabaszewski, Maciej
    Wiciak-Pikula, Martyna
    Felusiak-Czyryca, Agata
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2021, 72 : 738 - 744
  • [25] DETECTION OF WEAR DEGREE OF CUTTING-TOOL BY ACOUSTIC-EMISSION SIGNAL
    TANAKA, C
    NAKAO, T
    NISHINO, Y
    HAMAGUCHI, T
    TAKAHASHI, A
    MOKUZAI GAKKAISHI, 1992, 38 (09): : 841 - 846
  • [26] Analysis on cloud characteristics of wear acoustic emission signal for vehicle cutting tool
    Guan S.
    Kang Z.
    Peng C.
    2016, Chinese Society of Agricultural Engineering (32): : 63 - 69
  • [27] Chaotic Characteristics Analysis on Acoustic Emission Monitoring Signal of Tool Condition
    Xi, Jianhui
    Han, Wenlan
    Xu, Tao
    PROCEEDINGS OF THE 2009 CHINESE CONFERENCE ON PATTERN RECOGNITION AND THE FIRST CJK JOINT WORKSHOP ON PATTERN RECOGNITION, VOLS 1 AND 2, 2009, : 736 - 740
  • [28] Wear monitoring of single point cutting tool using acoustic emission techniques
    Kulandaivelu, P.
    Kumar, P. Senthil
    Sundaram, S.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2013, 38 (02): : 211 - 234
  • [29] A brief review: acoustic emission method for tool wear monitoring during turning
    Li, XL
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (02): : 157 - 165
  • [30] Acoustic emission technique as a means for monitoring single point cutting tool wear
    Rao, PKR
    Prasad, P
    Shantha, V
    Pai, PS
    TRENDS IN NDE SCIENCE AND TECHNOLOGY - PROCEEDINGS OF THE 14TH WORLD CONFERENCE ON NDT (14TH WCNDT), VOLS 1-5, 1996, : 2513 - 2518
12345