Rotor Design of High-Speed Permanent Magnet Synchronous Motors Considering Rotor Magnet and Sleeve Materials

被引：52
|
作者：
Ahn, Ji-hun [1 ]
Han, Cheol [2 ]
Kim, Chang-woo [3 ]
Choi, Jang-young [3 ]
机构：
[1] MAGNETAR, Dept Res & Dev, Daejeon 34103, South Korea
[2] MAGNETAR Inc, Daejeon 34103, South Korea
[3] Chungnam Natl Univ, Dept Elect Engn, Daejeon 34134, South Korea
来源：
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2018年 / 28卷 / 03期
关键词：
Analytical method; sleeve material; mechanical stress; high-speed PMSM;
D O I：
10.1109/TASC.2017.2786690
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper describes the rotor design of high-speed permanent magnet (PM) synchronous motors considering rotor magnet and sleeve materials. The influence of four different sleeve materials with two different PM materials on the mechanical stress of a high-speed PM rotor is presented, and the relationship between sleeve thickness and shrink fit is examined. Rotor design criteria according to rotor materials are described by an analytical method. The proposed method is validated by an actual operational test at 400000 rpm using a fabricated prototype rotor.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Electromagnetic Optimization of a High-Speed Interior Permanent Magnet Motor Considering Rotor Stress
    Yang, Fang
    Li, Niumei
    Du, Guanghui
    Huang, Ming
    Kang, Zhen
    [J]. APPLIED SCIENCES-BASEL, 2024, 14 (14):
  • [32] Strength Analysis of Rotor for High-speed Permanent Magnet Machine
    Wang, Tianyu
    Xing, Junqiang
    [J]. 2010 THE 3RD INTERNATIONAL CONFERENCE ON COMPUTATIONAL INTELLIGENCE AND INDUSTRIAL APPLICATION (PACIIA2010), VOL VIII, 2010, : 418 - 421
  • [33] Low-Cost Ferrite Permanent Magnet Assisted Synchronous Reluctance Rotor and Permanent Magnet Synchronous Rotor with Flux Concentrator an Alternative for rare Earth Permanent Magnet Synchronous Motors
    Musuroi, S.
    Sorandaru, C.
    Greconici, M.
    Olarescu, V. N.
    Weinman, M.
    [J]. 2014 INTERNATIONAL CONFERENCE ON APPLIED AND THEORETICAL ELECTRICITY (ICATE), 2014,
  • [34] Strength Analysis of Enclosure for a High-Speed Permanent Magnet Rotor
    Zhou, Yingeng
    Fang, Jiancheng
    [J]. CONFERENCE ON MODELING, IDENTIFICATION AND CONTROL, 2012, 3 : 652 - 660
  • [35] Strength Analysis of Rotor for High-speed Permanent Magnet Machine
    Wang, Tianyu
    Xing, Junqiang
    [J]. 2011 INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION AND INDUSTRIAL APPLICATION (ICIA2011), VOL III, 2011, : 418 - 421
  • [36] Design of high-speed permanent magnet synchronous machines considering thermal demagnetization and mechanical characteristic of permanent magnet
    Bang, Tae-Kyoung
    Shin, Kyung-Hun
    Lee, Jeong-In
    Woo, Jong-Hyeon
    Cho, Han-Wook
    Choi, Jang-Young
    [J]. AIP ADVANCES, 2021, 11 (02)
  • [37] Influence of Rotor-Sleeve Electromagnetic Characteristics on High-Speed Permanent-Magnet Generator
    Li, Weili
    Qiu, Hongbo
    Zhang, Xiaochen
    Cao, Junci
    Zhang, Sainan
    Yi, Ran
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (06) : 3030 - 3037
  • [38] Rotor Stress Analysis of High-Speed Surface-Mounted Permanent Magnet Motors with Segmented Poles Considering Fillings
    Zezhi Xing
    Xiuhe Wang
    Wenliang Zhao
    [J]. Journal of Electrical Engineering & Technology, 2023, 18 : 2103 - 2113
  • [39] Robustness of rotor position observer for permanent magnet synchronous motors with unknown magnet flux
    Bernard, Pauline
    Praly, Laurent
    [J]. IFAC PAPERSONLINE, 2017, 50 (01): : 15403 - 15408
  • [40] Rotor Stress Analysis of High-Speed Surface-Mounted Permanent Magnet Motors with Segmented Poles Considering Fillings
    Xing, Zezhi
    Wang, Xiuhe
    Zhao, Wenliang
    [J]. JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2023, 18 (03) : 2103 - 2113
12345