Laser lap welding quality of steel/aluminum dissimilar metal joint and its electronic simulations

被引：15

作者：

Zhou, Dianwu ^{[1
]}

Xu, Shaohua ^{[1
]}

Peng, Li ^{[1
]}

Liu, Jinshui ^{[1
]}

机构：

[1] Hunan Univ, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2016年 / 86卷 / 5-8期

关键词：

Laser lap welding; Steel to aluminum dissimilar metals; Intermetallic compounds; Foil interlayer; EXCHANGE; B2FEAL; STEEL;

D O I：

10.1007/s00170-015-8254-0

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

This paper presents an effect of alloying elements on brittleness of FeAl phase. Microstructure and mechanical properties of laser welding joints with/without Cu or Pb foil in an overlap steel-on-aluminum configuration are investigated. A good agreement between the experimental results and theoretical predictions for the improved mechanical properties can be seen. In the case of adding Pb foil, there is good combination between the metal of the weld pool and the base aluminum metals, welding defects are uneven, and the layer thickness of intermetallic compounds (IMCs) reduces compared with that of no foil; in addition, Mg2Pb phase is formed at the steel/aluminum interface, and the structure of Mg2Pb is more stable than that of FeAl. Thus, the formation of IMCs is inhibited; hence, mechanical properties of the welding joint are significantly improved.

引用

页码：2231 / 2242

页数：12

共 50 条

[41] Interfacial Reaction during Dissimilar Friction Stir Lap Welding of Aluminum Alloy to Stainless Steel
Ogura, Tomo
Nishida, Taichi
Takahashi, Makoto
Nishida, Hidehito
Fujimoto, Mitsuo
Hirose, Akio
ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 389 - +
[42] Research of aluminum/steel dissimilar metal laser welding-brazing and parameter optimization based on RSM
Zhou, Jianzhong
She, Jie
Huang, Shu
Meng, Xiankai
Zhongguo Jiguang/Chinese Journal of Lasers, 2015, 42
[43] Influences of TIG welding parameters on tensile behavior of dissimilar metal lap joint for low carbon steel and AA1050
Pasupathy, J.
Ravisankar, V.
PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 493 - 498
[44] Corrosion behavior of aluminum/steel dissimilar metals friction stir welding joint
莫淑娴
董少康
朱浩
焦忆楠
王军
China Welding, 2021, 30 (03) : 20 - 30
[45] Tailoring of Dissimilar Friction Stir Lap Welding of Aluminum and Titanium
Kalinenko, Alexander
Dolzhenko, Pavel
Borisova, Yulia
Malopheyev, Sergey
Mironov, Sergey
Kaibyshev, Rustam
MATERIALS, 2022, 15 (23)
[46] Dissimilar unbeveled aluminum to steel butt joint achieved by laser-arc hybrid welding-brazing
Yu, Gaoyang
Nie, Xiaoming
Li, Lize
Chen, Shuhai
Wang, Yonglei
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 6980 - 6989
[47] AN INVESTIGATION INTO THE LASER MICRO-WELDING OF ALUMINUM AND COPPER IN LAP JOINT CONFIGURATION
Balu, Prabu
Carlson, Blair
Kovacevic, Radovan
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2011, : 295 - 307
[48] Improving the Quality of Dissimilar Al/Steel Butt-Lap Joint via Ultrasonic-Assisted Friction Stir Welding
Chen, Yu
Zhang, Fenghe
MATERIALS, 2022, 15 (05)
[49] Microstructural, porosity and mechanical properties of lap joint laser welding for 5182 and 6061 dissimilar aluminum alloys under different place configurations
Chen, Lin
Wang, Chunming
Xiong, Lingda
Zhang, Xiong
Mi, Gaoyang
MATERIALS & DESIGN, 2020, 191
[50] Joint strength and behaviour of coated aluminium in laser lap welding of steel sheets
Saita, Kenji
Miyazaki, Yasunobu
Welding International, 2012, 26 (08) : 601 - 611

← 1 2 3 4 5 →