Laser lap welding quality of steel/aluminum dissimilar metal joint and its electronic simulations

被引：15

作者：

Zhou, Dianwu ^{[1
]}

Xu, Shaohua ^{[1
]}

Peng, Li ^{[1
]}

Liu, Jinshui ^{[1
]}

机构：

[1] Hunan Univ, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2016年 / 86卷 / 5-8期

关键词：

Laser lap welding; Steel to aluminum dissimilar metals; Intermetallic compounds; Foil interlayer; EXCHANGE; B2FEAL; STEEL;

D O I：

10.1007/s00170-015-8254-0

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

This paper presents an effect of alloying elements on brittleness of FeAl phase. Microstructure and mechanical properties of laser welding joints with/without Cu or Pb foil in an overlap steel-on-aluminum configuration are investigated. A good agreement between the experimental results and theoretical predictions for the improved mechanical properties can be seen. In the case of adding Pb foil, there is good combination between the metal of the weld pool and the base aluminum metals, welding defects are uneven, and the layer thickness of intermetallic compounds (IMCs) reduces compared with that of no foil; in addition, Mg2Pb phase is formed at the steel/aluminum interface, and the structure of Mg2Pb is more stable than that of FeAl. Thus, the formation of IMCs is inhibited; hence, mechanical properties of the welding joint are significantly improved.

引用

页码：2231 / 2242

页数：12

共 50 条

[21] Microstructure, mechanical properties, and electronic simulations of steel/aluminum alloy joint during deep penetration laser welding
Dianwu Zhou
Shaohua Xu
Lijuan Zhang
Yan Peng
Jinshui Liu
The International Journal of Advanced Manufacturing Technology, 2017, 89 : 377 - 387
[22] The Effect of Physical Properties on Welding Induced Distortion in Dissimilar Steel Lap Joint
Waheed, Rehan
Saeed, Hasan Aftab
Butt, Sajid Ullah
Faraz, Zahid
PROCEEDINGS OF 2021 INTERNATIONAL BHURBAN CONFERENCE ON APPLIED SCIENCES AND TECHNOLOGIES (IBCAST), 2021, : 1 - 5
[23] Laser roll welding of dissimilar metal joint of low carbon steel to aluminum alloy using 2kW fiber laser
Ozaki, Hitoshi
Kutsuna, Muneharu
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2007, 25 (04): : 473 - 479
[24] Effect of pin length and welding speed on lap joint quality of friction stir welded dissimilar aluminum alloys
Ji, Shude (superjsd@163.com), 1600, Springer London (98): : 5 - 8
[25] Effect of pin length and welding speed on lap joint quality of friction stir welded dissimilar aluminum alloys
Zhenhua Ge
Shuangsheng Gao
Shude Ji
Dejun Yan
The International Journal of Advanced Manufacturing Technology, 2018, 98 : 1461 - 1469
[26] Effect of pin length and welding speed on lap joint quality of friction stir welded dissimilar aluminum alloys
Ge, Zhenhua
Gao, Shuangsheng
Ji, Shude
Yan, Dejun
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (5-8): : 1461 - 1469
[27] Effect of the surface state of steel on the microstructure and mechanical properties of dissimilar metal lap joints of aluminum and steel by friction stir welding
Chen, Y. C.
Nakata, K.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (08): : 1985 - 1992
[28] Effect of the Surface State of Steel on the Microstructure and Mechanical Properties of Dissimilar Metal Lap Joints of Aluminum and Steel by Friction Stir Welding
Y.C. Chen
K. Nakata
Metallurgical and Materials Transactions A, 2008, 39 : 1985 - 1992
[29] Study on laser welding for lap joint of stainless steel case
Xiong, Jiangang
Hu, Xiyuan
Chen, Zutao
Li, Zhiyuan
Yingyong Jiguang/Applied Laser Technology, 1997, 17 (04): : 176 - 178
[30] Dissimilar joining of low-carbon steel to aluminum alloy with TiC particles added in a zero-gap lap joint configuration by laser welding
Xu, Tianyu
Zhou, Shaowei
Wu, Han
Ma, Xiuquan
Liu, Huailiang
Li, Meng
MATERIALS CHARACTERIZATION, 2021, 182

← 1 2 3 4 5 →