Finite Element Analysis ofGlass/Epoxy Skin and RigidFoamCore Sandwich Composites -Simulation of Shear Modes and FlexuralModes of Failure

被引：2
|
作者：
Chandra, Saras M. [1 ]
Ramya, M. [1 ]
Suresh, E. [1 ]
Padmanabhan, K. [1 ]
机构：
[1] VIT Univ, Sch Mech Engimeering, Vellore 632014, Tamil Nadu, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 08期
关键词：
Sandwich Composites; FEM; Flexure; Single Lap Shear; Double Lap Shear; T-Peel; ANSYS; BEHAVIOR; JOINTS;
D O I：
10.1016/j.matpr.2017.07.236
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The main aim of paper is to conduct finite element analysis of sandwich composites under different loadings. Sandwich composites of Glass fabric reinforced Epoxy skins and Rigid Poly Urethane FoamCore of three different densities are tested under three-point bending setup to obtain the flexural properties, Foam cores are tested under tension and compression to evaluate their axial behavior. Sandwich specimens are tested in T-Peel, Single Lap Shear and Double Lap shear to evaluate their shear behavior under tensile loading and to observe mode-I, mixed mode, and mode-II failure of specimens. Forall of the above tests Finite Element Analysis(FEA) is carried out using ANSYS (TM) and experimental and FEM values are verified. In three-point Bending test Sandwich beams are fabricated and tested with different skin to core weight ratios and different span to depth ratios and while testing different failure modes are observed. These Failure modes are correlated with FEM and failure criteria are applied as per failure and all the obtained values are compared. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：8856 / 8865
页数：10
相关论文
共 50 条
  • [31] Study on shear postbuckling failure of composite sandwich plates by a quasi-conforming finite element method
    Li, Dong
    Huang, Bao-Zong
    COMPOSITES SCIENCE AND TECHNOLOGY, 2015, 119 : 46 - 54
  • [32] Finite-element block shear failure deformation-to-fracture failure analysis
    Adewole, K. K.
    Joy, Oladejo O.
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 2020, 47 (04) : 418 - 427
  • [33] FRAGMENTATION ALGORITHM FOR FINITE-ELEMENT FAILURE SIMULATION AND ANALYSIS
    RICE, DL
    TING, EC
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1993, 36 (22) : 3859 - 3881
  • [34] Failure analysis and finite element simulation of key components of PDM
    Zhang, Jie
    Liang, Zheng
    Han, Chuanjun
    ENGINEERING FAILURE ANALYSIS, 2014, 45 : 15 - 25
  • [35] Finite element analysis of the compressive properties of 3D integrated sandwich composites
    Cao, Haijian
    Qian, Kun
    Wei, Qufu
    Li, Hongshun
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2011, 28 (01): : 230 - 234
  • [36] Effect of alumina nanoparticles on shear strength of epoxy adhesive: Experimental and finite element analysis
    Gupta, Sunil Kumar
    Shukla, Dharmendra Kumar
    Bharti, Anurag
    2017 INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL, INDUSTRIAL, AUTOMATION AND MANAGEMENT SYSTEMS (AMIAMS) - PROCEEDINGS, 2017, : 307 - 313
  • [37] Finite element analysis of micromechanical failure modes in a heterogeneous ceramic material system
    J. Zhai
    M. Zhou
    International Journal of Fracture, 2000, 101 : 161 - 180
  • [38] Nonlinear finite element analysis of failure modes and ultimate strength of flexible pipes
    Yoo, Dong-Hyun
    Jang, Beom-Seon
    Yim, Ki-Ho
    MARINE STRUCTURES, 2017, 54 : 50 - 72
  • [39] Finite element analysis of micromechanical failure modes in a heterogeneous ceramic material system
    Zhai, J
    Zhou, M
    INTERNATIONAL JOURNAL OF FRACTURE, 2000, 101 (1-2) : 161 - 180
  • [40] Finite element analysis of micromechanical failure modes in a heterogeneous ceramic material system
    Zhai, J.
    Zhou, M.
    International Journal of Fracture, 2000, 101 (01) : 161 - 180
12345