Sintering behavior of Al2O3-TiC composite powder prepared by SHS process

被引：33
|
作者：
Lee, JH [1 ]
Ko, SK [1 ]
Won, CW [1 ]
机构：
[1] Chungnam Natl Univ, Rapidly Solidified Mat Res Ctr, RASOM, Taejon 305764, South Korea
来源：
MATERIALS RESEARCH BULLETIN | 2001年 / 36卷 / 5-6期
关键词：
ceramics; chemical synthesis; X-ray diffraction; mechanical properties;
D O I：
10.1016/S0025-5408(01)00579-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al2O3-TiC: composite powder was prepared by the self-propagating high-temperature synthesis (SHS) process, using TiO2,, Al, and C powders as raw materials. The effects of keeping the TiO2:Al:C molar ratio fixed at 3:4:2.7 while varying the carbon sources and cooling time on the products were studied. The highest combustion temperature and combustion velocity were obtained at activated carbon. But, microstructure and mechanical properties of sintered Al2O3-TiC composite did not show any significant differences according to the carbon sources. Hot pressing was found to be very effective in hindering the formation of pore and obtaining a dense sintered body at 1650 degreesC. The sintered body produced by hot-pressing was about 98.8% and 99.2%: of the theoretical density for synthesized and commercial powder respectively. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
下载
收藏
页码：989 / 996
页数：8
相关论文
共 50 条
  • [41] 自蔓延高温合成法（SHS）制备致密的Al2O3－TiC陶瓷
    殷声，唐清，郭志猛，果世驹，赖和怡
    Journal of University of Science and Technology Beijing(English Edition), 1994, (English Edition)
  • [42] Metallothermic SHS of Al2O3-Cr2O3 + TiC ceramic composite material
    Miloserdov, Pavel A.
    Gorshkov, Vladimir A.
    Andreev, Dmitrii E.
    Yukhvid, Vladimir I.
    Miloserdova, Olga M.
    Golosova, Olga A.
    CERAMICS INTERNATIONAL, 2023, 49 (14) : 24071 - 24076
  • [43] Micromachining of Al2O3-TiC ceramics by excimer laser
    Oliveira, V
    Vilar, R
    Conde, O
    REVISTA DE METALURGIA, 1998, 34 (02) : 206 - 209
  • [44] Research on the densification in pressureless sintering of Al2O3-TiC/Ti(C,N) ceramic composites
    Liu, L
    Qi, LH
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 : 410 - 413
  • [45] Preparation, microstructures and properties of Al2O3-TiC composites
    Cai, KF
    McLachlan, DS
    Axen, N
    Manyatsa, R
    CERAMICS INTERNATIONAL, 2002, 28 (02) : 217 - 222
  • [46] Lamellar and interpenetrated Al/(Al2O3-TiC) composites prepared by bidirectional freeze casting and melt infiltration
    Hu, Zhi-Jie
    Guo, Rui-Fen
    Shen, Ping
    CERAMICS INTERNATIONAL, 2022, 48 (20) : 30734 - 30744
  • [47] Laser ablation of Al2O3-TiC:: a spectroscopic investigation
    Oliveira, V
    Orlianges, JC
    Catherinot, A
    Conde, O
    Vilar, R
    APPLIED SURFACE SCIENCE, 2002, 186 (1-4) : 309 - 314
  • [48] Excimer laser micromachining of Al2O3-TiC ceramics
    Mendes, M
    Oliveira, V
    Vilar, R
    MICROENGINEERING 99, PROCEEDINGS, 1999, : 169 - 175
  • [49] PRESSURELESS-SINTERED AL2O3-TIC COMPOSITES
    CUTLER, RA
    HURFORD, AC
    VIRKAR, AV
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1988, 105 : 183 - 192
  • [50] Simulation of KrF laser ablation of Al2O3-TiC
    Oliveira, V.
    Colaco, R.
    Vilar, R.
    APPLIED SURFACE SCIENCE, 2007, 253 (18) : 7585 - 7590
12345