Sintering behavior of Al2O3-TiC composite powder prepared by SHS process

被引：33
|
作者：
Lee, JH [1 ]
Ko, SK [1 ]
Won, CW [1 ]
机构：
[1] Chungnam Natl Univ, Rapidly Solidified Mat Res Ctr, RASOM, Taejon 305764, South Korea
来源：
MATERIALS RESEARCH BULLETIN | 2001年 / 36卷 / 5-6期
关键词：
ceramics; chemical synthesis; X-ray diffraction; mechanical properties;
D O I：
10.1016/S0025-5408(01)00579-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al2O3-TiC: composite powder was prepared by the self-propagating high-temperature synthesis (SHS) process, using TiO2,, Al, and C powders as raw materials. The effects of keeping the TiO2:Al:C molar ratio fixed at 3:4:2.7 while varying the carbon sources and cooling time on the products were studied. The highest combustion temperature and combustion velocity were obtained at activated carbon. But, microstructure and mechanical properties of sintered Al2O3-TiC composite did not show any significant differences according to the carbon sources. Hot pressing was found to be very effective in hindering the formation of pore and obtaining a dense sintered body at 1650 degreesC. The sintered body produced by hot-pressing was about 98.8% and 99.2%: of the theoretical density for synthesized and commercial powder respectively. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
下载
收藏
页码：989 / 996
页数：8
相关论文
共 50 条
  • [31] Developing Al2O3-TiC in-situ nanocomposite by SHS and analyzingtheeffects of Al content and mechanical activation on microstructure
    Masoudian, A.
    Karbasi, M.
    SharifianJazi, F.
    Saidi, A.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2013, 14 (04): : 486 - 491
  • [32] Pressureless sintering of Al2O3-TiC powders produced from carbon coated precursors
    Kaga, H
    Newman, KB
    Koc, R
    ADVANCES IN CERAMIC MATRIX COMPOSITES VIII, 2002, 139 : 51 - 56
  • [33] Mechanochemically synthesized Al2O3-TiC nanocomposite
    Sharifi, E. Mohammad
    Karimzadeh, F.
    Enayati, M. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 411 - 415
  • [34] Laser micromachining of Al2O3-TiC ceramics
    Oliveira, V
    Vilar, R
    Conde, O
    Freitas, P
    JOURNAL OF MATERIALS RESEARCH, 1997, 12 (12) : 3206 - 3209
  • [35] RAPID RATE SINTERING OF AL2O3-TIC COMPOSITES FOR CUTTING-TOOL APPLICATIONS
    LEE, MY
    BOROM, MP
    ADVANCED CERAMIC MATERIALS, 1988, 3 (01): : 38 - 44
  • [36] Microstructures of TiC-Al2O3-Fe composites prepared by SHS/PHIP
    Zhang, WF
    Tao, CH
    Xi, NS
    Han, JC
    Du, SY
    JOURNAL OF INORGANIC MATERIALS, 2001, 16 (01) : 173 - 177
  • [37] Properties of TiC-Al2O3/Fe composites prepared by SHS/PHIP
    Zhang, W.F.
    Han, J.C.
    Du, S.Y.
    Xi, N.S.
    Tao, C.H.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2001, 18 (02): : 70 - 74
  • [38] 自蔓延高温合成法(SHS)制备致密的Al2O3－TiC陶瓷
    殷声
    唐清
    郭志猛
    果世驹
    赖和怡
    International Journal of Minerals,Metallurgy and Materials, 1994, (Z1) : 21+15 - 21
  • [39] Fabrication of highly efficient dicing blade for cutting Al2O3-TiC composite
    Adachi, Takuya
    Matsumaru, Koji
    Ishizaki, Kozo
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2006, 114 (1328) : 336 - 340
  • [40] Mechanical properties and microstructure of Al2O3-TiC composite by hot-pressing
    Shi, Suilin
    Zhang, Lingzhen
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1424 - +
12345