Microstructural evolution and change in hardness during creep of NF709 austenitic stainless steel

被引：8
|
作者：
Zhao, Yan [1 ]
Zhao, Jie [1 ]
Li, Xiaona [2 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China
[2] Dalian Univ Technol, Minist Educ, Key Lab Mat Modificat Laser Ion & Electron Beams, Dalian 116085, Peoples R China
来源：
ACTA METALLURGICA SINICA-ENGLISH LETTERS | 2011年 / 24卷 / 03期
关键词：
NF709; Creep-introduced; Hardness; Microstructural evolution;
D O I：
10.11890/1006-7191-113-220
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Microstructural evolution and the change in hardness during creep deformation of NF709 austenitic stainless steel were investigated. Creep tests were carried out at 650 degrees C for 2932 h under a load of 210 MPa for comparison with aging specimen at 650 degrees C for 3000 h. The hardness results indicated that applied stress during creep process induced hardness increase. Analysis of longitudinal section microstructure showed that the creep damage caused by pores and the grain boundary hardening caused by elongated grains could be the factors leading to hardness differences. The G phase dispersedly precipitated in intragranular and interacted with dislocations during creep process, indicating strain hardening.
引用
收藏
页码：220 / 224
页数：5
相关论文
共 50 条
  • [41] Microstructural evolution of neutron irradiated ultrafine-grained austenitic stainless steel
    Habiyaremye, Frederic
    Rouland, Solene
    Radiguet, Bertrand
    Cuvilly, Fabien
    Klaes, Benjamin
    Tanguy, Benoit
    Malaplate, Joel
    Domain, Christophe
    Goncalves, Diogo
    Abramova, Marina M.
    Enikeev, Nariman A.
    Sauvage, Xavier
    Etienne, Auriane
    JOURNAL OF NUCLEAR MATERIALS, 2025, 607
  • [42] Microstructural evolution of welded austenitic stainless steel irradiated in HFIR target experiments
    Sawai, T
    Shiba, K
    Hishinuma, A
    JOURNAL OF NUCLEAR MATERIALS, 1998, 258 : 1997 - 2001
  • [43] Prediction of metal temperature by microstructural features in creep exposed austenitic stainless steel with sparse modeling
    Endo, Akihiro
    Sawada, Kota
    Nagata, Kenji
    Yoshikawa, Hideki
    Shouno, Hayaru
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS-METHODS, 2021, 1 (01): : 225 - 233
  • [44] Influence of post deposition annealing on the microstructural evolution and tensile behavior of austenitic stainless-steel alloy 709 made by laser powder bed fusion
    Mantri, S. A.
    Zhang, X.
    Chen, W. -Y
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 927
  • [45] Microstructure evolution in an austenitic stainless steel during wire rolling
    Yvell, Karin
    Engberg, Goran
    RECRYSTALLIZATION AND GRAIN GROWTH V, 2013, 753 : 407 - 410
  • [46] Microstructural evolution of Alloy 709 during aging
    Ding, Rengen
    Yan, Jin
    Li, Hangyue
    Yu, Suyang
    Rabiei, Afsaneh
    Bowen, Paul
    MATERIALS CHARACTERIZATION, 2019, 154 : 400 - 423
  • [47] Microstructural evolution and the effect on hardness and plasticity of S31042 heat-resistant steel during creep
    Yang, Yahong
    Zhu, Lihui
    Wang, Qijiang
    Zhu, Changchun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 608 : 164 - 173
  • [48] Hardness Variation in P92 Heat-Resistant Steel based on Microstructural Evolution during Creep
    Jiang, Jun
    Zhu, Lihui
    Wang, Yanfeng
    STEEL RESEARCH INTERNATIONAL, 2013, 84 (08) : 732 - 739
  • [49] Evolution of microstructures during the solidification of 304 austenitic stainless steel
    BHP Minerals Technology, PO Box 188, Wallsend, NSW 2287, Australia
    Metallurgia Italiana, 2002, 94 (7-8): : 39 - 46
  • [50] A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel
    Sumantra Mandal
    A. K. Bhaduri
    V. Subramanya Sarma
    Metallurgical and Materials Transactions A, 2011, 42 : 1062 - 1072
12345