Microstructural evolution and change in hardness during creep of NF709 austenitic stainless steel

被引：8
|
作者：
Zhao, Yan [1 ]
Zhao, Jie [1 ]
Li, Xiaona [2 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China
[2] Dalian Univ Technol, Minist Educ, Key Lab Mat Modificat Laser Ion & Electron Beams, Dalian 116085, Peoples R China
来源：
ACTA METALLURGICA SINICA-ENGLISH LETTERS | 2011年 / 24卷 / 03期
关键词：
NF709; Creep-introduced; Hardness; Microstructural evolution;
D O I：
10.11890/1006-7191-113-220
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Microstructural evolution and the change in hardness during creep deformation of NF709 austenitic stainless steel were investigated. Creep tests were carried out at 650 degrees C for 2932 h under a load of 210 MPa for comparison with aging specimen at 650 degrees C for 3000 h. The hardness results indicated that applied stress during creep process induced hardness increase. Analysis of longitudinal section microstructure showed that the creep damage caused by pores and the grain boundary hardening caused by elongated grains could be the factors leading to hardness differences. The G phase dispersedly precipitated in intragranular and interacted with dislocations during creep process, indicating strain hardening.
引用
收藏
页码：220 / 224
页数：5
相关论文
共 50 条
  • [21] Stochastic aspects of evolution of creep damage in austenitic stainless steel
    Roy, N.
    Bose, S. C.
    Ghosh, R. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19): : 4810 - 4817
  • [22] Microstructural Evolution and Change in Hardness of S30432 Heat-resistant Steel during Creep at 650°C
    Zhu, L. H.
    Zhang, Y. J.
    Wang, Q. J.
    Xu, S. O.
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (04) : 315 - 319
  • [23] Microstructural Evolution During Friction Surfacing of Austenitic Stainless Steel AISI 304 on Low Carbon Steel
    Rafi, H. Khalid
    Babu, N. Kishore
    Phanikumar, G.
    Rao, K. Prasad
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (01): : 345 - 350
  • [24] Microstructural Evolution During Friction Surfacing of Austenitic Stainless Steel AISI 304 on Low Carbon Steel
    H. Khalid Rafi
    N. Kishore Babu
    G. Phanikumar
    K. Prasad Rao
    Metallurgical and Materials Transactions A, 2013, 44 : 345 - 350
  • [25] High-temperature effects on creep-fatigue interaction of the Alloy 709 austenitic stainless steel
    Alsmadi, Zeinab Y.
    Murty, K. L.
    INTERNATIONAL JOURNAL OF FATIGUE, 2021, 143
  • [26] Creep of austenitic stainless steel welds
    Mannan, SL
    Mathew, MD
    BULLETIN OF MATERIALS SCIENCE, 1996, 19 (06) : 985 - 1007
  • [27] Effect of triple beam irradiation on microstructural evolution in austenitic stainless steel
    Hamada, S
    Zhang, YC
    Miwa, Y
    Yamaki, D
    RADIATION PHYSICS AND CHEMISTRY, 1997, 50 (06) : 555 - 559
  • [28] Microstructural evolution and mechanical properties of 316 austenitic stainless steel by CGP
    Singh, Rahul
    Agrahari, Shubham
    Yadav, Surya Deo
    Kumar, Abhishek
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 812
  • [29] MICROSTRUCTURAL STABILITY DURING CREEP OF A NIOBIUM-STABILIZED AUSTENITIC STEEL
    NATEGH, S
    GOODHEW, PJ
    SZKOPIAK, ZC
    ACTA METALLURGICA, 1981, 29 (07): : 1299 - 1308
  • [30] Mechanical Behavior and Microstructural Change of a High Nitrogen CrMn Austenitic Stainless Steel during Hot Deformation
    Zhenhua Wang
    Wantang Fu
    Shuhua Sun
    Hui Li
    Zhiqing Lv
    Deli Zhao
    Metallurgical and Materials Transactions A, 2010, 41 : 1025 - 1032
12345