Proposal of a 2DOF Wound-Rotor Resolver

被引：14
|
作者：
Zare, Fateme [1 ]
Nasiri-Gheidari, Zahra [1 ]
机构：
[1] Sharif Univ Technol, Dept Elect Engn, Tehran 1458889694, Iran
来源：
IEEE SENSORS JOURNAL | 2021年 / 21卷 / 17期
关键词：
Sensors; Stator cores; Windings; Signal resolution; Coils; Stator windings; Rotors; Wound rotor (WR) resolver; two degrees of freedom (2DOF); finite element method (FEM); rotational-linear resolver; ECCENTRICITY FAULT-DIAGNOSIS; POSITION ERROR; DESIGN; OPTIMIZATION; PERFORMANCE; MODEL; ACCURACY;
D O I：
10.1109/JSEN.2021.3089540
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Two Degrees of Freedom (2DOF) electrical machines are widely used in robotics. They need position sensors for their electronic commutation and high performance control loop. 2DOF resolvers are the best choice for such applications. Therefore, in this paper a new configuration is proposed for rotational-linear position estimation. Then, an optimization is done to reduce the sensor's volume by 25.99%. The optimal design also has more accuracy in both rotational (about 75%) and linear (about 56%) motions. The performance of the initial design and the optimal one is analyzed using three-dimensional (3-D) transient finite element method (FEM). Afterwards, the optimal configuration is built and experimentally tested. Measured results confirms the success of the proposed design.
引用
收藏
页码：18633 / 18640
页数：8
相关论文
共 50 条
  • [31] DESIGN PHILOSOPHY OF LARGE WOUND-ROTOR INDUCTION MOTORS
    DUNCAN, RW
    ELECTRICAL REVIEW, 1970, 187 (03): : 83 - &
  • [32] Design and Optimization of a Brushless Wound-Rotor Vernier Machine
    Ali, Qasim
    Hussain, Asif
    Baloch, Noman
    Kwon, Byung Il
    ENERGIES, 2018, 11 (02)
  • [33] Nonlinear control of wound-rotor synchronous-motor
    El Magri, A.
    Giri, F.
    Abouloifa, A.
    Haloua, M.
    PROCEEDINGS OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, VOLS 1-4, 2006, : 1927 - +
  • [34] Slip Independent Monitoring of Wound-Rotor Induction Machines
    Kia, Shahin Hedayati
    Mpanda-Mabwe, Augustin
    Ceschi, Roger
    IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE 2010), 2010, : 1485 - 1490
  • [35] Thermal Model and Analysis of Wound-Rotor Induction Machine
    Boglietti, Aldo
    Cavagnino, Andrea
    Popescu, Mircea
    Staton, Dave
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2013, 49 (05)
  • [36] Experimental Parameterization Procedure for a Wound-Rotor Induction Generator
    Xu, Yuanzhen
    Aliprantis, Dionysios C.
    2013 IEEE POWER AND ENERGY CONFERENCE AT ILLINOIS (PECI), 2013, : 95 - 100
  • [37] Static Eccentricity Fault Diagnosis in Wound-Rotor Resolvers
    Lasjerdi, H.
    Nasiri-Gheidari, Z.
    Tootoonchian, F.
    IEEE SENSORS JOURNAL, 2021, 21 (02) : 1424 - 1432
  • [38] Cylindrical Wound-Rotor Synchronous Machines for Traction Applications
    Graffeo, Federica
    Vaschetto, Silvio
    Cossale, Marco
    Kerschbaumer, Michael
    Bortoni, Edson C.
    Cavagnino, Andrea
    2020 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), VOL 1, 2020, : 1736 - 1742
  • [39] 2DOF Controller Tuning
    Viteckova, Miluse
    Vitecek, Antonin
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2015, 18 : 57 - 64
  • [40] The PID and 2DOF control of the integral system - influence of the 2DOF parameters and practical implementation
    Guras, Radek
    Strambersky, Radek
    Mahdal, Miroslav
    Measurement and Control (United Kingdom), 2022, 55 (1-2): : 94 - 101
12345