Hot-Pressed TiB2 Ceramics With B4C and C Additives

被引：2
|
作者：
Wang, Li [1 ]
Guo, Wei-Ming [2 ]
Li, Yao-Gang [1 ]
Zhang, Guo-Jun [2 ]
机构：
[1] Donghua Univ, Coll Mat Sci & Engn, Shanghai 200051, Peoples R China
[2] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
HIGH-PERFORMANCE CERAMICS VI | 2010年 / 434-435卷
关键词：
TiB2; B4C and C additives; Densification; Microstructure; TITANIUM DIBORIDE; SINTERING AID; MECHANICAL-PROPERTIES; BORON-CARBIDE; ZIRCONIUM DIBORIDE; DENSIFICATION; NITRIDE; CARBON; IRON;
D O I：
10.4028/www.scientific.net/KEM.434-435.182
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Effects of B4C and C additives on the densification behavior, phase composition, and microstructure of TiB2 ceramics were studied. The relative density of pure TiB2 ceramics by hot pressing at 2000 degrees C for 1 h was only 77.4%. With the introduction of B4C and C additives, the relative density increase to 97.4% and 98.1%, respectively. The great improvement on densification was due to the removal of surface oxides of TiB2 powders by reaction with B4C and C additives. Microstructure observation showed the addition of B4C led to some TiB2 grains abnormal growth (>10 mu m), whereas the addition of C produced a uniform and fine-grained microstructure.
引用
收藏
页码：182 / +
页数：2
相关论文
共 50 条
  • [41] Structure and Mechanical Properties of Hot-Pressed Composite Ceramics W2B5–ZrB2–SiC–B4C
    D. D. Nesmelov
    S. S. Ordan’yan
    Yu. P. Udalov
    Refractories and Industrial Ceramics, 2021, 62 : 202 - 207
  • [42] Spark plasma sintering of B4C ceramics: The effects of milling medium and TiB2 addition
    Xu, Changming
    Cai, Yanbing
    Flodstrom, Katarina
    Li, Zheshen
    Esmaeilzadeh, Saeid
    Zhang, Guo-Jun
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 30 (01): : 139 - 144
  • [43] SHS-assisted Shock Sintering and Characterization of TiB2 / B4C Composite Ceramics
    Li Y.
    Gao X.
    Chen P.
    Liu K.
    Binggong Xuebao/Acta Armamentarii, 2024, 45 (01): : 26 - 34
  • [44] Small amount TiB2 addition into B4C through sputter deposition and hot pressing
    Hwang, Chawon
    DiPietro, Stephen
    Xie, Kelvin Y.
    Yang, Qirong
    Celik, Azmi M.
    Khan, Atta U.
    Domnich, Vladislav
    Walck, Scott
    Hemker, Kevin J.
    Haber, Richard A.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2019, 102 (08) : 4421 - 4426
  • [45] Influence of silicon infiltration on the wear and oxidation resistance of hot-pressed B4C/C(graphite) composites
    Jiang, Tao
    Han, Manman
    Fu, Jia
    CERAMICS INTERNATIONAL, 2021, 47 (24) : 34927 - 34939
  • [46] Small amount TiB2 addition into B4C through sputter deposition and hot pressing
    Hwang, Chawon
    DiPietro, Stephen
    Xie, Kelvin Y.
    Yang, Qirong
    Celik, Azmi M.
    Khan, Atta U.
    Domnich, Vladislav
    Walck, Scott
    Hemker, Kevin J.
    Haber, Richard A.
    Journal of the American Ceramic Society, 2019, 102 (08): : 4421 - 4426
  • [47] STRUCTURE AND PROPERTIES OF REACTION HOT-PRESSED B4C-TIB2-W2B5 MATERIALS
    HOFMANN, H
    PETZOW, G
    JOURNAL OF THE LESS-COMMON METALS, 1986, 117 (1-2): : 121 - 127
  • [48] Mechanical Properties and Oxidation Resistance of Hot Pressed B4C Ceramics Material
    Yue, Xinyan
    Chen, Bishuang
    Zhao, Jing
    Ru, Hongqiang
    Wang, Wei
    FUNDAMENTAL OF CHEMICAL ENGINEERING, PTS 1-3, 2011, 233-235 : 2272 - 2275
  • [49] Microstructure and mechanical properties of hot-pressed B4C/TiC/Mo ceramic composites
    Deng Jianxin
    Sun Junlong
    CERAMICS INTERNATIONAL, 2009, 35 (02) : 771 - 778
  • [50] EFFECT OF CARBON ADDITIONS AND B4C PARTICLE SIZE ON THE MICROSTRUCTURE AND PROPERTIES OF B4C TiB2 COMPOSITES
    McCuiston, R. C.
    LaSalvia, J. C.
    Moser, B.
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES III, 2008, 28 (02): : 257 - +
12345