Structure and Mechanical Properties of Hot-Pressed Composite Ceramics W2B5–ZrB2–SiC–B4C

被引：0
|
作者：
D. D. Nesmelov
S. S. Ordan’yan
Yu. P. Udalov
机构：
[1] Saint Petersburg State Institute of Technology (Technical University),
来源：
Refractories and Industrial Ceramics | 2021年 / 62卷
关键词：
ceramics; hot pressing; tungsten boride; zirconium boride; silicon carbide; boron carbide; bending strength; flexural strength; hardness; fracture toughness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A high-density ceramic material (97% of theoretical density) was obtained by hot pressing of ball-milled powders W2B5, ZrB2, SiC and B4C with holding for 15 minutes at a temperature of 1850°C and a pressure of 30 MPa in an argon atmosphere. The structure and composition of the material were investigated by x-ray diffraction, scanning electron microscopy, and energy-dispersive x-ray spectroscopy. Vickers hardness (19.3 GPa), crack resistance coefficient (5,7 MPa∙m1/2) and bending strength (695 MPa) were determined.
引用
收藏
页码：202 / 207
页数：5
相关论文
共 50 条
  • [1] Structure and Mechanical Properties of Hot-Pressed Composite Ceramics W2B5-ZrB2-SiC-B4C
    Nesmelov, D. D.
    Ordan'yan, S. S.
    Udalov, Yu. P.
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2021, 62 (02) : 202 - 207
  • [2] Hot-Pressed ZrB2 Ceramics With Composite Additives of Zr and B4C
    Wang, Xin-Gang
    Guo, Wei-Ming
    Kan, Yan-Mei
    Zhang, Guo-Jun
    ADVANCED ENGINEERING MATERIALS, 2010, 12 (09) : 893 - 898
  • [3] Mechanical, Tribological, and Thermal Properties of Hot-Pressed ZrB2-B4C Composite
    Chakraborty, Shirshendu
    Debnath, Debashish
    Mallick, Azizur Rahaman
    Das, Probal Kumar
    International Journal of Applied Ceramic Technology, 2015, 12 (03) : 568 - 576
  • [4] Microstructural and Mechanical Properties of Hot-pressed (B4C, SiC)/TiB2 Composites
    Akarsu, Ali Cem
    Gokce, Hasan
    Ertug, Burcu
    Addemir, A. Okan
    Ovecoglu, M. Lutfi
    Boyraz, Tahsin
    CFI-CERAMIC FORUM INTERNATIONAL, 2012, 89 (11-12): : E31 - E36
  • [5] Transmission Electron Microscopy Investigation of Hot-pressed ZrB2-SiC with B4C Additive
    Kim, Seongwon
    Chae, Jung-Min
    Lee, Sung-Min
    Oh, Yoon-Suk
    Kim, Hyung-Tae
    Jang, Byung-Koog
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2015, 52 (06) : 462 - 466
  • [6] Physical and Mechanical Properties of Hot-Pressed Materials of the ZrB2–TaC–SiC System
    D. D. Nesmelov
    I. D. Shabalkin
    A. S. Lysenkov
    S. S. Ordan’yan
    Refractories and Industrial Ceramics, 2019, 59 : 514 - 521
  • [7] Microstructure, mechanical properties, and oxidation behavior of hot-pressed ZrB2-SiC-B4C composites
    Alvari, Masoumeh Dehghanzadeh
    Kakroudi, Mahdi Ghassemi
    Salahimehr, Behnam
    Alaghmandfard, Reza
    Asl, Mehdi Shahedi
    Mohammadi, Mohsen
    CERAMICS INTERNATIONAL, 2021, 47 (07) : 9627 - 9634
  • [8] Hot-Pressed TiB2 Ceramics With B4C and C Additives
    Wang, Li
    Guo, Wei-Ming
    Li, Yao-Gang
    Zhang, Guo-Jun
    HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 : 182 - +
  • [9] The Influence of SiC, B4C and ZrO2 on the densification and mechanical properties of ZrB2
    Gocmez, Hasan
    Tuncer, Mustafa
    Yeniceri, Y. Selim
    JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2016, 52 (02) : 73 - 75
  • [10] The Effect of Mechanical Activation on the Compaction and Structurization of Hot-Pressed ZrB2 Ceramics
    T.O. Liudvinskaya
    T.V. Mosina
    I.P. Neshpor
    O.N. Grigoriev
    M.D. Bega
    M.E. Golovkova
    A.V. Stepanenko
    V.M. Panashenko
    V.I. Subbotin
    A.A. Zubarev
    Powder Metallurgy and Metal Ceramics, 2021, 60 : 69 - 77
12345