Hot-Pressed TiB2 Ceramics With B4C and C Additives

被引：2
|
作者：
Wang, Li [1 ]
Guo, Wei-Ming [2 ]
Li, Yao-Gang [1 ]
Zhang, Guo-Jun [2 ]
机构：
[1] Donghua Univ, Coll Mat Sci & Engn, Shanghai 200051, Peoples R China
[2] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
HIGH-PERFORMANCE CERAMICS VI | 2010年 / 434-435卷
关键词：
TiB2; B4C and C additives; Densification; Microstructure; TITANIUM DIBORIDE; SINTERING AID; MECHANICAL-PROPERTIES; BORON-CARBIDE; ZIRCONIUM DIBORIDE; DENSIFICATION; NITRIDE; CARBON; IRON;
D O I：
10.4028/www.scientific.net/KEM.434-435.182
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Effects of B4C and C additives on the densification behavior, phase composition, and microstructure of TiB2 ceramics were studied. The relative density of pure TiB2 ceramics by hot pressing at 2000 degrees C for 1 h was only 77.4%. With the introduction of B4C and C additives, the relative density increase to 97.4% and 98.1%, respectively. The great improvement on densification was due to the removal of surface oxides of TiB2 powders by reaction with B4C and C additives. Microstructure observation showed the addition of B4C led to some TiB2 grains abnormal growth (>10 mu m), whereas the addition of C produced a uniform and fine-grained microstructure.
引用
收藏
页码：182 / +
页数：2
相关论文
共 50 条
  • [1] Microstructural and Mechanical Properties of Hot-pressed (B4C, SiC)/TiB2 Composites
    Akarsu, Ali Cem
    Gokce, Hasan
    Ertug, Burcu
    Addemir, A. Okan
    Ovecoglu, M. Lutfi
    Boyraz, Tahsin
    CFI-CERAMIC FORUM INTERNATIONAL, 2012, 89 (11-12): : E31 - E36
  • [2] Hot-Pressed ZrB2 Ceramics With Composite Additives of Zr and B4C
    Wang, Xin-Gang
    Guo, Wei-Ming
    Kan, Yan-Mei
    Zhang, Guo-Jun
    ADVANCED ENGINEERING MATERIALS, 2010, 12 (09) : 893 - 898
  • [3] Microstructure, Mechanical and Thermal Properties of Hot-pressed TiB2 Ceramics with B4C and Phenolic Resin-Derived Carbon Sintering Additives
    Heo, Minsu
    Oh, Youngjun
    Jeong, Chang Hui
    Kim, Young-Wook
    Kim, Hyun-Sik
    Jung, Wook Ki
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2025, 84 (01) : 34 - 41
  • [4] HOT-PRESSED TIB2
    GRAVES, GA
    AMERICAN CERAMIC SOCIETY BULLETIN, 1967, 46 (04): : 449 - &
  • [5] Influences of B4C content and particle size on the mechanical properties of hot pressed TiB2–B4C composites
    Zhao, Jun
    Li, Qinggui
    Cao, Weixiao
    Liu, Zetan
    Deng, Xiangong
    Ding, Xiang
    Ran, Songlin
    Journal of Asian Ceramic Societies, 2021,
  • [6] Microstructure and mechanical properties of hot-pressed TiB2 ceramics
    Luo, XT
    Xie, XL
    Yuan, RZ
    JOURNAL OF INORGANIC MATERIALS, 2000, 15 (03) : 541 - 545
  • [7] INFLUENCE OF METALLIC ADDITIVES ON DENSIFICATION BEHAVIOUR OF HOT-PRESSED TiB2
    Luo, Xudong
    Wang, Zhaowen
    Hu, Xianwei
    Shi, Zhongning
    Gao, Bingliang
    Wang, Chao
    Chen, Guanghua
    Tu, Ganfeng
    LIGHT METALS 2009, 2009, : 1151 - 1155
  • [8] Effect of additives introduced by ball milling on sintering behavior and mechanical properties of hot-pressed B4C ceramics
    Ma, Qian-Cheng
    Zhang, Guo-Jun
    Kan, Yan-Mei
    Xia, Yi-Ben
    Wang, Pei-Ling
    CERAMICS INTERNATIONAL, 2010, 36 (01) : 167 - 171
  • [9] Effects of B4C particle size on the microstructures and mechanical properties of hot-pressed B4C-TiB2 composites
    Liu, Zetan
    Deng, Xiangong
    Li, Jiamao
    Sun, Yaxin
    Ran, Songlin
    CERAMICS INTERNATIONAL, 2018, 44 (17) : 21415 - 21420
  • [10] Solid-state properties of hot-pressed TiB2 ceramics
    Königshofer, R
    Fürnsinn, S
    Steinkellner, P
    Lengauer, W
    Haas, R
    Rabitsch, K
    Scheerer, M
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2005, 23 (4-6): : 350 - 357
12345