Investigation of dissolution behavior of metallic substrates and intermetallic compound in molten lead-free solders

被引：42
|
作者：
Yen, Yee-Wen [1 ]
Chou, Weng-Ting [2 ]
Tseng, Yu [2 ]
Lee, Chiapyng [2 ]
Hsu, Chun-Lei [1 ]
机构：
[1] Natl Taiwan Univ Sci & Technol, Grad Inst Mat Sci & Technol, Taipei 106, Taiwan
[2] Natl Taiwan Univ Sci & Technol, Dept Chem Engn, Taipei 106, Taiwan
来源：
JOURNAL OF ELECTRONIC MATERIALS | 2008年 / 37卷 / 01期
关键词：
dissolution behavior; intermetallic compound (IMC); dissolution mechanism; grain boundary; lattice diffusion;
D O I：
10.1007/s11664-007-0266-6
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This study investigates the dissolution behavior of the metallic substrates Cu and Ag and the intermetallic compound (IMC)-Ag3Sn in molten Sn, Sn-3.0Ag-0.5Cu, Sn-58Bi and Sn-9Zn (in wt.%) at 300, 270 and 240 degrees C. The dissolution rates of both Cu and Ag in molten solder follow the order Sn > Sn-3.0Ag-0.5Cu > Sn-58Bi > Sn-9Zn. Planar Cu3Sn and scalloped Cu6Sn5 phases in Cu/solders and the scalloped Ag3Sn phase in Ag/solders are observed at the metallic substrate/solder interface. The dissolution mechanism is controlled by grain boundary diffusion. The planar Cu5Zn8 layer formed in the Sn-9Zn/Cu systems. AgZn3, Ag5Zn(8) and AgZn phases are found in the Sn-9Zn/Ag system and the dissolution mechanism is controlled by lattice diffusion. Massive Ag3Sn phases dissolved into the solders and formed during solidification processes in the Ag3Sn/Sn or Sn-3.0Ag-0.5Cu systems. AgZn3 and Ag5Zn8 phases are formed at the Sn-9Zn/Ag3Sn interface. Zn atoms diffuse through Ag-Zn IMCs to form (Ag, Zn)Sn-4 and Sn-rich regions between Ag5Zn8 and Ag3Sn.
引用
收藏
页码：73 / 83
页数：11
相关论文
共 50 条
  • [21] Resonant vibration behavior of lead-free solders
    Song, JM
    Lui, TS
    Chen, LH
    Tsai, DY
    JOURNAL OF ELECTRONIC MATERIALS, 2003, 32 (12) : 1501 - 1508
  • [22] Resonant vibration behavior of lead-free solders
    J. M. Song
    T. S. Lui
    L. H. Chen
    D. Y. Tsai
    Journal of Electronic Materials, 2003, 32 : 1501 - 1508
  • [23] On the factors affecting the dissolution of copper in molten lead-free solders and development of a method to assess the soldering parameters
    Di Maio, D.
    Hunt, C. P.
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2009, 21 (04) : 24 - 31
  • [24] Dissolution Behaviors of the Ni and Ni3Sn4 phase in Molten Lead-free Solders
    Yen, Yee-Wen
    Kuo, Meng-Han
    Liou, Wei-Kai
    Chu, Tai-Ni
    2012 7TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2012,
  • [25] Dissolution of Copper and Formation of IMC in Bulk Lead-Free Solders
    Faizan, Mohammad
    MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (02) : 169 - 174
  • [26] Solderability of Bulk Metallic Glasses Using Lead-Free Solders
    Nishikawa, Hiroshi
    WongPiromsarn, Krit
    Abe, Hiroya
    Takemoto, Tadashi
    Fukuhara, Mikio
    Inoue, Akihisa
    MATERIALS TRANSACTIONS, 2009, 50 (06) : 1326 - 1329
  • [27] Morphology of intermetallic compounds formed between lead-free Sn-Zn based solders and Cu substrates
    Chia-Wei Huang
    Kwang-Lung Lin
    Journal of Electronic Materials, 2006, 35 : 2135 - 2141
  • [28] Morphology of intermetallic compounds formed between lead-free Sn-Zn based solders and Cu substrates
    Huang, Chia-Wei
    Lin, Kwang-Lung
    JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (12) : 2135 - 2141
  • [29] In Situ Synchrotron Characterization of Melting, Dissolution, and Resolidification in Lead-Free Solders
    Zhou, Bite
    Bieler, Thomas R.
    Wu, Guilin
    Zaefferer, Stefan
    Lee, Tae-Kyu
    Liu, Kuo-Chuan
    JOURNAL OF ELECTRONIC MATERIALS, 2012, 41 (02) : 262 - 272
  • [30] In Situ Synchrotron Characterization of Melting, Dissolution, and Resolidification in Lead-Free Solders
    Bite Zhou
    Thomas R. Bieler
    Guilin Wu
    Stefan Zaefferer
    Tae-Kyu Lee
    Kuo-Chuan Liu
    Journal of Electronic Materials, 2012, 41 : 262 - 272
12345