Preparation of High-Strength Ti3AlC2 by Spark Plasma Sintering

被引：13
|
作者：
Wang, Wenjuan [1 ,2 ]
Li, Cuiwei [1 ,2 ]
Zhai, Hongxiang [1 ,2 ]
Wang, Changan [2 ]
机构：
[1] Beijing Jiaotong Univ, Inst Mat Sci & Engn, Sch Mech & Elect Control, Engn, Beijing 100044, Peoples R China
[2] Beijing Jiaotong Univ, Inst Mat Sci & Engn, Sch Mech & Elect Control Engn, Beijing 100044, Peoples R China
来源：
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2015年 / 12卷
关键词：
MECHANICAL-PROPERTIES; TI3SIC2; PHASES; DEPENDENCE; HARDNESS;
D O I：
10.1111/ijac.12254
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ti3AlC2 bulk materials with high mechanical properties have been fabricated by spark plasma sintering using Ti3AlC2 powders as starting material. Effects of sintering temperature on the microstructure and mechanical properties of Ti3AlC2 were investigated. Nearly full-dense Ti3AlC2 samples could be obtained after sintering the powders in the 1300-1400 degrees C temperature range for 3min under a pressure of 20MPa. The as-prepared Ti3AlC2 samples have finer grains, which results in higher mechanical properties. The Ti3AlC2 samples prepared at 1350 degrees C show a higher hardness of 3.84 +/- 0.06 GPa and flexural strength of 746.8 +/- 6 MPa.
引用
收藏
页码：E126 / E131
页数：6
相关论文
共 50 条
  • [41] Rapid synthesis of Ti2AlC by spark plasma sintering technique
    Zhou, WB
    Mei, BC
    Zhu, JQ
    Hong, XL
    MATERIALS LETTERS, 2005, 59 (01) : 131 - 134
  • [42] Machinable Ti2AlC ceramics produced by spark plasma sintering
    Guo, Junming
    Wang, Baosen
    Chen, Kexin
    Zhou, Heping
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2007, 36 (05): : 865 - 868
  • [43] Reactive Synthesis of Polycrystalline Ti3AlC2 and Its Sintering Behavior
    Tang Hai
    Feng Yi
    Huang Xiaochen
    Dou Yakun
    Ding Dongdong
    Xia Meng
    Tian Pei
    Qian Gang
    Zhang Xuebin
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (08) : 2108 - 2113
  • [44] Fabrication of Ti2AlC-Ti3AlC2-Ti3SiC2 composite by spark plasma sintering (SPS) method from elemental powders
    Hong, XL
    Mei, BC
    Zhu, JQ
    Zhou, WB
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (9-10) : 2749 - 2750
  • [45] Effects of TiC and Ti3AlC2 addition on combustion synthesis of Ti3AlC2 powders
    Guo, JM
    Chen, KX
    Ge, ZB
    Zhou, HP
    Ning, XS
    JOURNAL OF INORGANIC MATERIALS, 2003, 18 (01) : 251 - 256
  • [46] Fabrication of Ti2AlC-Ti3AlC2-Ti3SiC2 composite by spark plasma sintering (SPS) method from elemental powders
    Xiaolin Hong
    Bingchu Mei
    Jiaoqun Zhu
    Weibing Zhou
    Journal of Materials Science, 2005, 40 : 2749 - 2750
  • [47] Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders
    Wang, Yuanbo
    Huang, Zhenying
    Hu, Wenqiang
    Cai, Leping
    Lei, Cong
    Yu, Qun
    Jiao, Yidan
    MATERIALS CHARACTERIZATION, 2021, 178
  • [48] A novel and high-strength Ti-Al-V-Fe alloy prepared by spark plasma sintering
    Yang, Xin
    Zhang, Zhaoyang
    Wang, Ben
    Li, Yunzhe
    Liu, Gang
    Wang, Yan
    Zhang, Guangxi
    Liu, Shifeng
    POWDER METALLURGY, 2021, 64 (05) : 387 - 395
  • [49] Electrical, Thermal, and Mechanical Properties of Cu/Ti3AlC2 Functional Gradient Materials Prepared by Low-temperature Spark Plasma Sintering
    Yanlin Chen
    Hang Peng
    Lang Lou
    Kang Huang
    Ming Yan
    Chonggang Wu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2019, 34 : 876 - 882
  • [50] Electrical, Thermal, and Mechanical Properties of Cu/Ti3AlC2 Functional Gradient Materials Prepared by Low-temperature Spark Plasma Sintering
    陈艳林
    PENG Hang
    LOU Lang
    HUANG Kang
    YAN Ming
    吴崇刚
    Journal of Wuhan University of Technology(Materials Science), 2019, 34 (04) : 876 - 882
12345