Preparation of High-Strength Ti3AlC2 by Spark Plasma Sintering

被引：13
|
作者：
Wang, Wenjuan [1 ,2 ]
Li, Cuiwei [1 ,2 ]
Zhai, Hongxiang [1 ,2 ]
Wang, Changan [2 ]
机构：
[1] Beijing Jiaotong Univ, Inst Mat Sci & Engn, Sch Mech & Elect Control, Engn, Beijing 100044, Peoples R China
[2] Beijing Jiaotong Univ, Inst Mat Sci & Engn, Sch Mech & Elect Control Engn, Beijing 100044, Peoples R China
来源：
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2015年 / 12卷
关键词：
MECHANICAL-PROPERTIES; TI3SIC2; PHASES; DEPENDENCE; HARDNESS;
D O I：
10.1111/ijac.12254
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ti3AlC2 bulk materials with high mechanical properties have been fabricated by spark plasma sintering using Ti3AlC2 powders as starting material. Effects of sintering temperature on the microstructure and mechanical properties of Ti3AlC2 were investigated. Nearly full-dense Ti3AlC2 samples could be obtained after sintering the powders in the 1300-1400 degrees C temperature range for 3min under a pressure of 20MPa. The as-prepared Ti3AlC2 samples have finer grains, which results in higher mechanical properties. The Ti3AlC2 samples prepared at 1350 degrees C show a higher hardness of 3.84 +/- 0.06 GPa and flexural strength of 746.8 +/- 6 MPa.
引用
收藏
页码：E126 / E131
页数：6
相关论文
共 50 条
  • [21] Spark plasma sintering of TiAl-Ti3AlC2 composite
    Akhlaghi, Maryam
    Tayebifard, Seyed Ali
    Salahi, Esmaeil
    Asl, Mehdi Shahedi
    CERAMICS INTERNATIONAL, 2018, 44 (17) : 21759 - 21764
  • [22] Slip casting and pressureless sintering of Ti3AlC2
    Yimin GONG
    Wubian TIAN
    Peigen ZHANG
    Jian CHEN
    Yamei ZHANG
    Zhengming SUN
    Journal of Advanced Ceramics, 2019, (03) : 367 - 376
  • [23] Slip casting and pressureless sintering of Ti3AlC2
    Gong, Yimin
    Tian, Wubian
    Zhang, Peigen
    Chen, Jian
    Zhang, Yamei
    Sun, Zhengming
    JOURNAL OF ADVANCED CERAMICS, 2019, 8 (03) : 367 - 376
  • [24] Spark plasma sintering of high-strength lightweight ceramics
    Chuvil'deev, V. N.
    Boldin, M. S.
    Popov, A. A.
    Nokhrin, A. V.
    5TH INTERNATIONAL SCIENTIFIC WORKSHOP ON ADVANCED TECHNOLOGIES OF MATERIALS FIELD-ASSISTED CONSOLIDATION, 2017, 218
  • [25] Chemical surface modification of high-strength porous Ti compacts by spark plasma sintering
    Sakamoto, Y
    Asaoka, K
    Kon, M
    Matsubara, T
    Yoshida, K
    BIO-MEDICAL MATERIALS AND ENGINEERING, 2006, 16 (02) : 83 - 91
  • [26] Fabrication of Ti3AlC2 powder with high-purity by pressureless sintering
    Peng, CQ
    Wang, CA
    Qi, L
    Huang, Y
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 1247 - 1250
  • [27] Preparation and Microwave Absorption Properties of Ti3AlC2 Synthesized by Pressureless Sintering TiC/Ti/Al
    Shi, Yimin
    Luo, Fa
    Liu, Yi
    Zhou, Wancheng
    Zhang, Xinhui
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2015, 12 : E172 - E177
  • [28] An optimized method for synthesizing phase-pure Ti3AlC2 MAX-phase through spark plasma sintering
    Yunus, Mohammad
    Kumar, Rakesh
    Maji, Bikas C.
    Krishnan, Madangopal
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2022, 42 (02) : 354 - 363
  • [29] Optimized Synthesis of Ti2AlC by Spark Plasma Sintering
    Gurin M.S.
    Shtarev D.S.
    Shtareva A.V.
    Syuy A.V.
    Bull. Russ. Acad. Sci. Phys., 2023, Suppl 3 (S390-S397): : S390 - S397
  • [30] Ag/Ti3AlC2 composites with high hardness, high strength and high conductivity
    Liu, Manmen
    Chen, Jialin
    Cui, Hao
    Sun, Xudong
    Liu, Shaohong
    Xie, Ming
    MATERIALS LETTERS, 2018, 213 : 269 - 273
12345