Preparation of High-Strength Ti3AlC2 by Spark Plasma Sintering

被引：13
|
作者：
Wang, Wenjuan [1 ,2 ]
Li, Cuiwei [1 ,2 ]
Zhai, Hongxiang [1 ,2 ]
Wang, Changan [2 ]
机构：
[1] Beijing Jiaotong Univ, Inst Mat Sci & Engn, Sch Mech & Elect Control, Engn, Beijing 100044, Peoples R China
[2] Beijing Jiaotong Univ, Inst Mat Sci & Engn, Sch Mech & Elect Control Engn, Beijing 100044, Peoples R China
来源：
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2015年 / 12卷
关键词：
MECHANICAL-PROPERTIES; TI3SIC2; PHASES; DEPENDENCE; HARDNESS;
D O I：
10.1111/ijac.12254
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ti3AlC2 bulk materials with high mechanical properties have been fabricated by spark plasma sintering using Ti3AlC2 powders as starting material. Effects of sintering temperature on the microstructure and mechanical properties of Ti3AlC2 were investigated. Nearly full-dense Ti3AlC2 samples could be obtained after sintering the powders in the 1300-1400 degrees C temperature range for 3min under a pressure of 20MPa. The as-prepared Ti3AlC2 samples have finer grains, which results in higher mechanical properties. The Ti3AlC2 samples prepared at 1350 degrees C show a higher hardness of 3.84 +/- 0.06 GPa and flexural strength of 746.8 +/- 6 MPa.
引用
收藏
页码：E126 / E131
页数：6
相关论文
共 50 条
  • [1] Preparation and properties of Ti3AlC2/TiB2 composites by spark plasma sintering
    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
    Kuei Suan Jen Hsueh Pao, 2007, 5 (648-652+658):
  • [2] Preparation of Ti3AlC2/TiB2 composites sintered by spark plasma sintering
    School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
    不详
    Wuhan Ligong Daxue Xuebao, 2008, 5 (1-3):
  • [3] Synthesis and mechanical properties of Ti3AlC2 by spark plasma sintering
    Zhou, AG
    Wang, CA
    Hunag, Y
    JOURNAL OF MATERIALS SCIENCE, 2003, 38 (14) : 3111 - 3115
  • [4] Synthesis and mechanical properties of Ti3AlC2 by spark plasma sintering
    Aiguo Zhou
    Chang-An Wang
    Yong Hunag
    Journal of Materials Science, 2003, 38 : 3111 - 3115
  • [5] Spark plasma sintering of TiB2-based ceramics with Ti3AlC2
    Nayebi, Behzad
    Asl, Mehdi Shahedi
    Akhlaghi, Maryam
    Ahmadi, Zohre
    Tayebifard, Seyed Ali
    Salahi, Esmaeil
    Shokouhimehr, Mohammadreza
    Mohammadi, Mohsen
    CERAMICS INTERNATIONAL, 2021, 47 (09) : 11929 - 11934
  • [6] Synthesis of Ti2AlC/Ti3AlC2 with Si doping by spark plasma sintering and theoretical analysis
    Wang, Ping
    Mei, Bing-Chu
    Min, Xin-Min
    Hong, Xiao-Lin
    Zhou, Wei-Bing
    Yan, Ming
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2007, 17 (04): : 511 - 517
  • [7] Fabrication of textured Ti3AlC2 by spark plasma sintering and their anisotropic mechanical properties
    Mizuno, Yutaka
    Sato, Kimitoshi
    Mrinalini, Mishra
    Suzuki, Tohru S.
    Sakka, Yoshio
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2013, 121 (1412) : 366 - 369
  • [8] Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique
    Zhou, WB
    Me, BC
    Zhu, JQ
    Hong, XL
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (08) : 2099 - 2100
  • [9] Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique
    Weibing Zhou
    Bingchu Mei
    Jiaoqun Zhu
    Xiaolin Hong
    Journal of Materials Science, 2005, 40 : 2099 - 2100
  • [10] Fabrication of high-purity ternary carbide Ti3AlC2 by spark plasma sintering (SPS) technique
    Jinghong Song
    Haitao Yang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23 : 177 - 180
12345