Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment

被引：8
|
作者：
Bagishev, A. S. [1 ]
Mal'bakhova, I. M. [1 ]
Vorob'ev, A. M. [1 ]
Borisenko, T. A. [1 ]
Asmed'yanova, A. D. [1 ,2 ]
Titkov, A., I [1 ]
Nemudryi, A. P. [1 ]
机构：
[1] Russian Acad Sci, Inst Solid State Chem & Mechanochem, Siberian Branch, Novosibirsk, Russia
[2] Novosibirsk State Univ, Novosibirsk, Russia
来源：
RUSSIAN JOURNAL OF ELECTROCHEMISTRY | 2022年 / 58卷 / 07期
关键词：
fuel cells; hydrogen; 3D printing; additive manufacturing technologies; ELECTROLYTE;
D O I：
10.1134/S1023193522070047
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
A composition of the paste used in printing SOFC anodes is developed on the basis of nanosized nickel oxide and gadolinia-stabilized ceria with the aim of 3D inkjet printing followed by laser and thermal sintering. The parameters of the anode paste such as the size distribution of particles and the viscosity are determined. A SOFC anode sample is printed by means of a laboratory 3D printer equipped with a metering system for inkjet printing and also by a module for laser treatment. Experiments are carried out on printing three-dimensional test objects with the use of the developed ceramic paste. These samples are studied by a complex of physicochemical methods for determination of morphological and structural characteristics.
引用
收藏
页码：600 / 605
页数：6
相关论文
共 50 条
  • [41] An in vitro 3D immune exclusion tumor model engineered in a layer-by-layer fashion
    Hribar, Kolin C.
    Kleinheinz, Tracy
    Klementowicz, Joanna
    Kaufman, Susan
    Blake, Robert A.
    Eidenschenk, Celine
    CANCER RESEARCH, 2019, 79 (13)
  • [42] Vascularized cardiac tissue construction with orientation by layer-by-layer method and 3D printer
    Yoshinari Tsukamoto
    Takami Akagi
    Mitsuru Akashi
    Scientific Reports, 10
  • [43] Electronic circuit printing, 3D printing and film formation utilizing electrostatic inkjet technology
    Kawamoto, Hiroyuki
    NIP 23: 23RD INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, TECHNICAL PROGRAM AND PROCEEDINGS/DIGITAL FABRICATION 2007, 2007, : 961 - 964
  • [44] Effect of Laser Scanning Speed on the Formation of Sintered Layer in SLS 3-D Printing
    Park, Jeongbin
    Lee, Donghyun
    Kang, Ho-Jong
    POLYMER-KOREA, 2018, 42 (05) : 747 - 751
  • [45] Biomimicking of Hierarchal Molluscan Shell Structure Via Layer by Layer 3D Printing
    Yadav, Ramdayal
    Gond, Rajendra
    Dutta, Abhishek
    Wang, Xungai
    Naebe, Minoo
    Kandasubramanian, Balasubramanian
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2018, 57 (32) : 10832 - 10840
  • [46] The 3D Printer Design and Model Formation by a Commercial Inkjet Printing Module
    Cheng, Chun-, I
    Chen, Chun-Hao
    Lai, Wei-Hsiang
    Hwang, Sheng-Jye
    Lee, Sen-Yung
    ADVANCED MANUFACTURE: FOCUSING ON NEW AND EMERGING TECHNOLOGIES, 2008, 594 : 500 - +
  • [47] Lasers and leds layer on new capabilities for 3d printing
    Hogan, Hank
    Photonics Spectra, 2021, 55 (02) : 32 - 36
  • [48] Supramolecular layer-by-layer assembly of 3D multicomponent nanostructures via multivalent molecular recognition
    Ling, Xing Yi
    Phang, In Yee
    Reinhoudt, David N.
    Vancso, G. Julius
    Huskens, Jurriaan
    INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2008, 9 (04): : 486 - 497
  • [49] 3D Vertically Aligned CNT/Graphene Hybrids from Layer-by-Layer Transfer for Supercapacitors
    Nagelli, Enoch A.
    Huang, Liang
    Dai, Alvin Q. -Z.
    Du, Feng
    Dai, Liming
    PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION, 2017, 34 (09)
  • [50] 3D tissue models fabricated by controlling cell interface using a layer-by-layer nanofilm
    Matsusaki, Michiya
    Kadowaki, Koji
    Akashi, Mitsuru
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2011, 242
12345