Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment

被引：8
|
作者：
Bagishev, A. S. [1 ]
Mal'bakhova, I. M. [1 ]
Vorob'ev, A. M. [1 ]
Borisenko, T. A. [1 ]
Asmed'yanova, A. D. [1 ,2 ]
Titkov, A., I [1 ]
Nemudryi, A. P. [1 ]
机构：
[1] Russian Acad Sci, Inst Solid State Chem & Mechanochem, Siberian Branch, Novosibirsk, Russia
[2] Novosibirsk State Univ, Novosibirsk, Russia
来源：
RUSSIAN JOURNAL OF ELECTROCHEMISTRY | 2022年 / 58卷 / 07期
关键词：
fuel cells; hydrogen; 3D printing; additive manufacturing technologies; ELECTROLYTE;
D O I：
10.1134/S1023193522070047
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
A composition of the paste used in printing SOFC anodes is developed on the basis of nanosized nickel oxide and gadolinia-stabilized ceria with the aim of 3D inkjet printing followed by laser and thermal sintering. The parameters of the anode paste such as the size distribution of particles and the viscosity are determined. A SOFC anode sample is printed by means of a laboratory 3D printer equipped with a metering system for inkjet printing and also by a module for laser treatment. Experiments are carried out on printing three-dimensional test objects with the use of the developed ceramic paste. These samples are studied by a complex of physicochemical methods for determination of morphological and structural characteristics.
引用
收藏
页码：600 / 605
页数：6
相关论文
共 50 条
  • [21] Enhanced performance of NiO-3YSZ planar anode-supported SOFC with an anode functional layer
    Chen, Sainan
    Gu, Dongguang
    Zheng, Yifeng
    Chen, Han
    Guo, Lucun
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (01) : 88 - 98
  • [22] Enhanced performance of NiO–3YSZ planar anode-supported SOFC with an anode functional layer
    Sainan Chen
    Dongguang Gu
    Yifeng Zheng
    Han Chen
    Lucun Guo
    Journal of Materials Science, 2020, 55 : 88 - 98
  • [23] Layer-by-layer digital reconstruction of 3D field by electronic holography
    Hao, ZQ
    Cheng, D
    Wang, SY
    Feng, S
    Wang, GZ
    17TH CONGRESS OF THE INTERNATIONAL COMMISSION FOR OPTICS: OPTICS FOR SCIENCE AND NEW TECHNOLOGY, PTS 1 AND 2, 1996, 2778 : 247 - 248
  • [24] Layer-by-Layer Assembly of 3D Tissue Constructs with Functionalized Graphene
    Shin, Su Ryon
    Aghaei-Ghareh-Bolagh, Behnaz
    Gao, Xiguang
    Nikkhah, Mehdi
    Jung, Sung Mi
    Dolatshahi-Pirouz, Alireza
    Kim, Sang Bok
    Kim, Sun Min
    Dokmeci, Mehmet R.
    Tang, Xiaowu
    Khademhosseini, Ali
    ADVANCED FUNCTIONAL MATERIALS, 2014, 24 (39) : 6136 - 6144
  • [25] Fabrication of NiO/YSZ-Based Anodes for Solid Oxide Fuel Cells by Hybrid 3D Inkjet Printing and Laser Treatment
    Malbakhova, Inna
    Bagishev, Artem
    Vorobyev, Alexander
    Borisenko, Tatiana
    Logutenko, Olga
    Titkov, Alexander
    CERAMICS-SWITZERLAND, 2022, 5 (04): : 1115 - 1127
  • [26] On the quantitative assessment of the effect of multiple process parameters on the printed layer height in 3D inkjet printing
    Elkaseer, Ahmed
    Chen, Karin J.
    Kuchta, Matthias
    Scholz, Steffen G.
    VIRTUAL AND PHYSICAL PROTOTYPING, 2023, 18 (01)
  • [27] Inkjet 3D printing of clay ceramics for water treatment
    He Z.
    Shanmugasundaram T.S.
    Singh G.
    Progress in Additive Manufacturing, 2018, 3 (4) : 215 - 219
  • [28] Layer-by-Layer 3D Printing of Si Micro- and Nanostructures by Si Deposition, Ion Implantation and Selective Si Etching
    Fischer, Andreas C.
    Gylfason, Kristinn B.
    Belova, Lyubov M.
    Malm, B. Gunnar
    Radamson, Henry H.
    Kolahdouz, Mohammadreza
    Rikers, Yuri G. M.
    Stemme, Goran
    Niklaus, Frank
    2012 12TH IEEE CONFERENCE ON NANOTECHNOLOGY (IEEE-NANO), 2012,
  • [29] Core-Shell and Layer-by-Layer Assembly of 3D DNA Crystals
    McNeil, Ronald, Jr.
    Paukstelis, Pauli J.
    ADVANCED MATERIALS, 2017, 29 (28)
  • [30] 3D Concrete Printed Construction: Building the Future of Housing, Layer-by-Layer
    Rekhi, Jagruti
    Stern, Alaina
    CITYSCAPE, 2022, 24 (02) : 221 - 230
12345