Mechanical properties of Ti3AlC2 ceramics before and after heat treatment

被引：1
|
作者：
Yao, Lei [1 ]
Zhu, Chun-Cheng [1 ]
Jiang, Jiu-Xing [2 ]
Zhou, Bai-Bin [1 ]
机构：
[1] Harbin Normal Univ, Key Lab Design & Synth Funct Mat & Green Catalysi, Harbin 150025, Peoples R China
[2] Harbin Univ Sci & Technol, Coll Appl Sci, Harbin 150080, Peoples R China
来源：
RARE METALS | 2022年 / 41卷 / 08期
基金：
中国国家自然科学基金;
关键词：
Ti3AlC2; Heat treatment; Mechanical properties; PHASES; EVOLUTION; DAMAGE;
D O I：
10.1007/s12598-015-0609-z
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti3AlC2 ceramics were heat treated at the temperature from 1050 to 1450 degrees C. Vickers hardness, fracture toughness, flexural strength and compressive strength of Ti3AlC2 were tested and calculated before and after heat treatment, respectively. Ti3AlC2 content, fracture toughness, flexural strength and compressive strength of Ti3AlC2 first increase and then decrease, while Vickers hardness is just the opposite with the increase in temperature from 1050 to 1450 degrees C. After heat treatment at 1250 degrees C, Ti3AlC2 content reaches the highest level of 94.2 wt%, and fracture toughness, flexural strength and compressive strength reach the maximum values, which are 6.4 MPa center dot m(1/2), 318 MPa and 662 MPa, respectively. Vickers hardness reduces to the lowest value of 2.9 GPa. Heat treatment does improve the strength and Ti3AlC2 content, but reduces the hardness and optimizes the mechanical properties of Ti3AlC2.
引用
收藏
页码：2777 / 2782
页数：6
相关论文
共 50 条
  • [41] Fabrication of Ti3AlC2 ceramic material by mechanical alloying
    GUO Shiboa
    RareMetals, 2010, 29 (04) : 376 - 379
  • [42] Oxidation-induced crack healing in Ti3AlC2 ceramics
    Song, G. M.
    Pei, Y. T.
    Sloof, W. G.
    Li, S. B.
    De Hosson, J. Th. M.
    van der Zwaag, S.
    SCRIPTA MATERIALIA, 2008, 58 (01) : 13 - 16
  • [43] Fabrication of Ti3AlC2 ceramic material by mechanical alloying
    Shibo Guo
    Qiping Kang
    Jun Liu
    Xuanhui Qu
    Rare Metals, 2010, 29 : 376 - 379
  • [44] Charge and heat transfer of the Ti3AlC2 MAX phase
    R. V. Vovk
    G. Ya. Khadzhai
    T. A. Prikhna
    E. S. Gevorkyan
    M. V. Kislitsa
    A. L. Soloviev
    I. L. Goulatis
    A. Chroneos
    Journal of Materials Science: Materials in Electronics, 2018, 29 : 11478 - 11481
  • [45] Charge and heat transfer of the Ti3AlC2 MAX phase
    Vovk, R. V.
    Khadzhai, G. Ya
    Prikhna, T. A.
    Gevorkyan, E. S.
    Kislitsa, M. V.
    Soloviev, A. L.
    Goulatis, I. L.
    Chroneos, A.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, 29 (13) : 11478 - 11481
  • [46] Fabrication of Ti3AlC2 ceramic material by mechanical alloying
    Guo Shibo
    Kang Qiping
    Liu Jun
    Qu Xuanhui
    RARE METALS, 2010, 29 (04) : 376 - 379
  • [47] Fabrication of textured Ti3AlC2 by spark plasma sintering and their anisotropic mechanical properties
    Mizuno, Yutaka
    Sato, Kimitoshi
    Mrinalini, Mishra
    Suzuki, Tohru S.
    Sakka, Yoshio
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2013, 121 (1412) : 366 - 369
  • [48] Effects of Ti3AlC2 Content on Cu/Ti3AlC2 Composites by Hot Pressing Method
    Huang Zhenying
    Zhai Hongxiang
    Li Mengqi
    Liu Xiu
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 529 - 532
  • [49] Molten salt synthesis and formation mechanism of Ti3AlC2: A new path from Ti2AlC to Ti3AlC2
    Zhong, Yi
    Liu, Ying
    Jin, Na
    Lin, Zifeng
    Ye, Jinwen
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2023, 106 (09) : 5567 - 5579
  • [50] Mechanical properties and toughening mechanisms of highly textured Ti3AlC2 composite material
    Xie, Xi
    Li, Xiaoqiang
    Jia, Qing
    Bai, Chunguang
    Malzbende, Juergen
    Cui, Yuyou
    Yang, Rui
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2022, 42 (13) : 5493 - 5504
12345