Chemical sputtering of ta-C: Implications for the deposition of carbon nitride

被引:31
|
作者
Morrison, NA [1 ]
Rodil, SE [1 ]
Robertson, J [1 ]
Milne, WI [1 ]
机构
[1] Univ Cambridge, Dept Engn, Cambridge CB2 1PZ, England
关键词
D O I
10.1063/1.1359170
中图分类号
O59 [应用物理学];
学科分类号
摘要
The majority of attempts to synthesize the theoretically predicted superhard phase beta -C3N4 have been driven towards the use of techniques which maximize both the carbon sp(3) levels and the amount of nitrogen incorporated within the film. However, as yet no attempt has been made to understand the mechanism behind the resultant chemical sputter process and its obvious effect upon film growth. In this work, however, the chemical sputtering process has been investigated through the use of an as-deposited tetrahedrally bonded amorphous carbon film with a high density nitrogen plasma produced using an rf-based electron cyclotron wave resonance source. The results obtained suggested the presence of two distinct ion energy dependent regimes. The first, below 100 eV, involves the chemical sputtering of carbon from the surface, whereas the second at ion energies in excess of 100 eV exhibits a drop in sputter rate associated with the subplantation of nitrogen within the carbon matrix. Furthermore, as the sample temperature is increased there is a concomitant decrease in sputter rate suggesting that the rate is controlled by the adsorption and desorption of additional precursor species rather than the thermal desorption of CN. A simple empirical model has been developed in order to elucidate some of the primary reactions involved in the sputter process. Through the incorporation of various previously determined experimental parameters including electron temperature, ion current density, and nitrogen partial pressure the results indicated that molecular nitrogen physisorbed at the ta-C surface was the dominant precursor involved in the chemical sputter process. However, as the physisorption enthalpy of molecular nitrogen is low this suggests that activation of this molecular species takes place only through ion impact at the surface. The obtained results therefore provide important information for the modeling and growth of high density carbon nitride. (C) 2001 American Institute of Physics.
引用
收藏
页码:5754 / 5759
页数:6
相关论文
共 50 条
  • [31] The effect of thickness and arc current on the structural properties of FCVA synthesised ta-C and ta-C:N films
    McCann, R
    Roy, SS
    Papakonstantinou, P
    Abbas, G
    McLaughlin, JA
    DIAMOND AND RELATED MATERIALS, 2005, 14 (3-7) : 983 - 988
  • [32] Protection of industrial sensors with ta-C
    Tiainen, VM
    Lappalainen, R
    Anttila, A
    VACUUM, 2002, 67 (3-4) : 599 - 604
  • [33] Effect of oxygen on degradation of defects on ta-C coatings deposited by filtered arc deposition
    Murashima, Motoyuki
    Deng, Xingrui
    Izuoka, Hiroto
    Umehara, Noritsugu
    Kousaka, Hiroyuki
    SURFACE & COATINGS TECHNOLOGY, 2019, 362 : 200 - 207
  • [34] Synthesis and characterizatim of ta-C films by PLD using camphoric carbon target
    Rusop, M
    Nezasa, T
    Kinugawa, T
    Soga, T
    Jimbo, T
    2002 IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS, PROCEEDINGS, 2002, : 333 - 337
  • [35] The nanomechanics of tetrahedral amorphous diamond-like carbon (ta-C) mems
    Chasiotis, I
    Cho, SW
    Friedmann, TA
    Sullivan, JP
    ELECTRONIC AND PHOTONIC PACKAGING, ELECTRICAL SYSTEMS AND PHOTONIC DESIGN AND NANOTECHNOLOGY - 2003, 2003, : 879 - 883
  • [36] Tribological behavior of tetrahedral amorphous carbon (ta-C) coatings at elevated temperatures
    Deng, Xingrui
    Kousaka, Hiroyuki
    Tokoroyama, Takayuki
    Umehara, Noritsugu
    TRIBOLOGY INTERNATIONAL, 2014, 75 : 98 - 103
  • [37] Thermal conduction in metalized tetrahedral amorphous carbon (ta-C) films on silicon
    Chen, G
    Hui, P
    Xu, S
    THIN SOLID FILMS, 2000, 366 (1-2) : 95 - 99
  • [38] Electron emission from films of carbon nanotubes and ta-C coated nanotubes
    Dimitrijevic, S
    Withers, JC
    Mammana, VP
    Monteiro, OR
    Ager, JW
    Brown, IG
    APPLIED PHYSICS LETTERS, 1999, 75 (17) : 2680 - 2682
  • [39] DC vacuum arc deposition system with coiled anode for ta-C films achieving a high deposition rate
    Watanabe, Seiya
    Kito, Jumpei
    Sano, Genki
    Oneda, Mirano
    Bando, Takahiro
    Takikawa, Hirofumi
    Sugita, Hiroaki
    Hattori, Takahiro
    Gima, Hiroki
    VACUUM, 2025, 233
  • [40] Enhancement of discharge and deposition rate by imposed pulse current during the cathodic arc deposition of ta-C films
    Hu, Jian
    Tian, Xiubo
    Liu, Hongye
    Gong, Chunzhi
    Wang, Benfu
    VACUUM, 2021, 193