Effect of pulse Nd-YAG laser beam interaction on annealing of nanopowder ITO using spin-on-glass

被引：10

作者：

Amoli, H. Salar ^{[1
]}

Fathi, B. ^{[1
]}

机构：

[1] Iranian Res Org Sci & Technol, Fac Chem Ind, Tehran, Iran

来源：

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY | 2011年 / 59卷 / 01期

关键词：

Nanopowder ITO; Pulse Nd-YAG laser; Spin coating; Glass; Annealing; INDIUM-TIN-OXIDE; THIN-FILM; OPTICAL-PROPERTIES; DEPOSITION; BOTTOM;

D O I：

10.1007/s10971-011-2457-0

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effect of pulse Nd-YAG laser on structural and electrical properties of ITO thin film on glass by spin coating process was evaluated. It was found that the beam interaction of pulse laser energy has a significant effect on crystallization, conductivity and optical properties of ITO. Laser irradiation with a wavelength of 1,064 nm and energy of 8-40 J are employed. The conventional X-Ray diffraction studies show the peak intensities of (211), (222), and (440) planes increased by using Nd-YAG laser treatment and prove the crystallization of ITO nanoparticle. Due to absorption of millisecond pulse laser, the resistivity of ITO coating on glass substrate which was annealed at 350 A degrees C, reduced by a factor of 100, and a resistance of less than 0.6 ka"broken vertical bar has been achieved.

引用

页码：32 / 35

页数：4

共 46 条

[31] The processing of a magnesium-alumino-silicate matrix, SiC fibre glass-ceramic matrix composite using a pulsed Nd-YAG laser .2. The effect of process variables
Tuersley, IP
Hoult, AP
Pashby, IR
JOURNAL OF MATERIALS SCIENCE, 1996, 31 (15) : 4121 - 4126
[32] Multireftection effect on formation of periodic surface structure on an Si film melting-crystallized by a linearly polarized Nd: YAG pulse laser beam
Horita, Susumu
Kaki, Hirokazu
Nishioka, Kensuke
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2007, 46 (6A): : 3527 - 3533
[33] Growth and annealing effect of SrTiO3 thin films grown by pulsed laser deposition using fourth harmonic Nd:YAG pulsed laser
Takamura, Koji
Fujiwara, Takumi
Yokota, Akinobu
Nakamura, Motonori
Yoshimoto, Ken'ichi
PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 14 NO 6, 2017, 14 (06):
[34] ASSESSMENT OF THE EFFECT OF ND:YAG LASER PULSE OPERATING PARAMETERS ON THE METALLURGICAL CHARACTERISTICS OF DIFFERENT TOOL STEELS USING DOE SOFTWARE
Muhic, T.
Kosec, L.
Liedl, G.
Pleterski, M.
METALURGIJA, 2011, 50 (02): : 101 - 105
[35] SIMULTANEOUS SELF-STARTING ADDITIVE PULSE MODE-LOCKING AND 2ND HARMONIC-GENERATION OF AN ND-YAG LASER USING SELF-ORGANIZED GERMANOSILICATE OPTICAL FIBERS
BERNARDIN, JP
LAWANDY, NM
IEE PROCEEDINGS-J OPTOELECTRONICS, 1991, 138 (04): : 281 - 283
[36] Characteristics of a Laser Beam Produced by Using Thermal Lensing Effect Compensation in a Fiber-coupled Laser-diode-pumped Nd:YAG Ceramic Laser
Kim, Duck-Lae
Kim, Byung-Tai
JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2010, 57 (02) : 227 - 232
[37] Effect of the Q-switch parameters on the sintering behavior of laser micro sintering Cu-based metal powder using Q-switched Nd-YAG laser
Zhu, Haihong
Ke, Linda
Lei, Wenjuan
Dai, Cheng
Chen, Baijin
RAPID PROTOTYPING JOURNAL, 2013, 19 (01) : 44 - 50
[38] 2-PHOTON EXCITED VISIBLE FLUORESCENCE OF HEMATOPORPHYRIN AND PHEOPHORBIDE A AND INVITRO EXPERIMENTS OF THE PHOTODYNAMIC EFFECT ON CULTURED CANCER-CELLS USING A ND-YAG LASER
MASHIKO, S
SATO, S
INABA, H
KASAI, M
KIMURA, S
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS, 1986, 3 (08) : P72 - P73
[39] Effect of Laser Beam Conditioning on Fabrication of Micro-Channels in Al2O3 Bio-ceramics Using Nd:YAG Laser
Abdo, Basem M. A.
Al-Tamimi, Abdulaziz
Al-Ahmari, Abdulrahman
Alkhalefah, Hisham
2019 3RD INTERNATIONAL CONFERENCE ON MANUFACTURING TECHNOLOGIES (ICMT), 2019, 521
[40] A PASSIVELY Q-SWITCHED ND-YAG LASER WITH A VARIABLE PULSE-WIDTH USING LIF-F-2(-) COLOR-CENTER CRYSTAL IN A DUAL-CAVITY CONFIGURATION
KIM, NS
KONG, HJ
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1995, 34 (3A): : L303 - L305

← 1 2 3 4 5 →