Development of ultra-precision machining system with unique wire EDM tool fabrication system for micro/nano-machining

被引：69

作者：

Cheng, X. ^{[1
]}

Nakamoto, K. ^{[2
]}

Sugai, M. ^{[2
]}

Matsumoto, S. ^{[2
]}

Wang, Z. G. ^{[1
]}

Yamazaki, K. ^{[1
]}

机构：

[1] Univ Calif Davis, Dept Mech & Aeronaut Engn, Davis, CA 95616 USA

[2] Sodick Co Ltd, Yokohama, Kanagawa, Japan

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2008年 / 57卷 / 01期

关键词：

ultra-precision machine tool; wire EDM; ductile mode micromachining;

D O I：

10.1016/j.cirp.2008.03.137

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aiming at quality machining of very hard materials with nanometer level surface quality and 0.1 mu m dimensional accuracy, an ultra-precision machining system has been developed. The machine has feed axes accompanied by the counter motion mechanism driven at the center of gravity to eliminate the vibration caused by high acceleration/deceleration. A custom tool fabrication system consists of a 6-axis wire EDM machine and dedicated custom tool CAM system. High quality machining of sophisticated three-dimensional (3D) products made of tungsten carbide has successfully been demonstrated on the developed machine tool with custom-made PCD cutters fabricated by the tool fabrication system. (c) 2008 CIRP.

引用

页码：415 / 420

页数：6

共 50 条

[41] ULTRA-PRECISION MACHINING OF OPTICAL SURFACES WITH SLOW-TOOL SERVO
Bliedtner, Jens
Buerger, Wolfgang
Froehlich, Maik
ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM, 2008, : 117 - 118
[42] Analysis of surface generation in ultra-precision machining with a fast tool servo
Kwok, T. C.
Cheung, C. F.
Kong, L. B.
To, S.
Lee, W. B.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2010, 224 (B9) : 1351 - 1367
[43] Development of a computer assistant programming system for micro/nano milling tool fabrication by multi-axis wire EDM
Cheng, Xiang
Wang, Zhigang
Kobayashi, Shigeru
Nakamoto, Kazuo
Yamazaki, Kazuo
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 2009, 22 (09) : 847 - 856
[44] PRIMARY FACTORS AFFECTING ACCURACY IN ULTRA-PRECISION MACHINING BY DIAMOND TOOL
OHMORI, G
TAKADA, S
BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1982, 16 (01): : 3 - 7
[45] ENERGY-DISSIPATION AND TOOL WORKPIECE CONTACT IN ULTRA-PRECISION MACHINING
LUCCA, DA
SEO, YW
RHORER, RL
TRIBOLOGY TRANSACTIONS, 1994, 37 (03): : 651 - 655
[46] Acoustic emission based tool contact detection for ultra-precision machining
Min, S.
Lidde, J.
Raue, N.
Dornfeld, D.
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (01) : 141 - 144
[47] Latest Machine Tool Structural Design Technology for Ultra-Precision Machining
Shindo, Ryota
Nishiwaki, Shinji
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, 2020, 14 (02) : 304 - 310
[48] Smart nano-machining and measurement system with semiconductive diamond probe
Unno, K
Kitamoto, Y
Shibata, T
Makino, E
Ikeda, M
SMART MATERIALS AND STRUCTURES, 1999, : 599 - 605
[49] Smart nano-machining and measurement system with semiconductive diamond probe
Unno, K
Kitamoto, Y
Shibata, T
Makino, E
SMART MATERIALS & STRUCTURES, 2001, 10 (04): : 730 - 735
[50] Fabrication of micro tetrahedron patterns using ultra-precision shaping system
Department of Nano Fusion Technology, Pusan National University, Miryang, Korea, Republic of
不详
不详
Key Eng Mat, 2008, (469-472):

← 1 2 3 4 5 →