Effect of the different additives on the fabrication of porous kaolin-based mullite ceramics

被引：61
|
作者：
Hou, Zhaoping [1 ]
Cui, Bingxia [1 ]
Liu, Liangliang [1 ]
Liu, Qiang [2 ]
机构：
[1] Taiyuan Univ Technol, Coll Mat Sci & Engn, Taiyuan 030024, Peoples R China
[2] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2016年 / 42卷 / 15期
基金：
中国国家自然科学基金;
关键词：
Kaolin; Mullite; Porosity; Grain morphology; MEMBRANE SUPPORTS; FLY-ASH; WHISKERS; TRANSFORMATION; KINETICS; GROWTH;
D O I：
10.1016/j.ceramint.2016.08.020
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous mullite ceramics were prepared from kaolin and Al2O3 with different sintering additives TiO2, MgO and MoO3. The sintering aids have a significant influence on the grain morphology and densification process by varying the composition and viscosity of liquid phase during firing. The addition of TiO2 retarded the mullite transformation. The introduction of MgO promoted the secondary mullite transformation and the formation of needle-like mullite grains. Compared with MgO, the samples with MoO3 have lower secondary mullitization temperature. The lower secondary mullitization temperature was beneficial for the secondary mullite to grow anisotropically and then to hinder shrinkage during the sintering process. Thereby, the samples with MoO3 showed a network skeleton structure which consists of acicular mullite grains and exhibited a highly open porosity of 67%. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：17254 / 17258
页数：5
相关论文
共 50 条
  • [31] Effect of recoating slurry with different particle size on the properties of reticulated porous mullite ceramics
    Yufan Wang
    Daqian Hei
    Wenbao Jia
    Ruoyu Chen
    Shujing Li
    Journal of the Australian Ceramic Society, 2020, 56 : 619 - 629
  • [32] Fabrication and properties of cordierite-mullite bonded porous SiC ceramics
    Bai, Cheng-Ying
    Deng, Xiang-Yun
    Li, Jian-Bao
    Jing, Ya-Ni
    Jiang, Wen-Kai
    Liu, Zhang-Min
    Li, Yu
    CERAMICS INTERNATIONAL, 2014, 40 (04) : 6225 - 6231
  • [33] Fabrication of porous mullite ceramics with high porosity and low thermal conductivity
    Wang, C.-A., 1600, Chinese Ceramic Society (42):
  • [34] PREPARATION OF POROUS MULLITE CERAMICS BY LEACHING METHOD .2. EFFECT OF TRANSITION-METAL OXIDES ON THE CRYSTAL-GROWTH OF MULLITE FROM KAOLIN
    ABE, H
    SEKI, H
    FUKUNAGA, A
    TSUZUKI, H
    EGASHIRA, M
    NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1990, 98 (04): : 339 - 347
  • [35] High-porous ceramics based on mullite and silica
    Bendovskij, E.B.
    Steklo i Keramika, 2002, (10): : 13 - 15
  • [36] EFFECT OF PHYLLOSILICATE TYPE ON THE MICROSTRUCTURE AND PROPERTIES OF KAOLIN-BASED CERAMIC TAPES
    Lecomte-Nana, Gisele L.
    Lebdioua, Khaoula
    Laffort, Mylene
    Houta, Nadia
    Tessier-Doyen, Nicolas
    Abouliatim, Younes
    Peyratouta, Claire
    DEVELOPMENTS IN STRATEGIC CERAMIC MATERIALS II, 2017, : 47 - 60
  • [37] Preparation of mullite based ceramics from clay-kaolin waste mixtures
    Alves, Hugo P. A.
    Silva, Jaqueligia B.
    Campos, Liszandra F. A.
    Torres, Sandro M.
    Dutra, Ricardo P. S.
    Macedo, Daniel A.
    CERAMICS INTERNATIONAL, 2016, 42 (16) : 19086 - 19090
  • [38] Fabrication, Properties and Nonlinear Thermal Conductivity Model of Highly Porous Mullite Ceramics
    Luo Xue-Wei
    Li Hai-Feng
    Xiang Wu-Guo
    Yuan Hui
    Cheng Cheng
    Shen Xu-Gen
    Yan Chun-Jie
    JOURNAL OF INORGANIC MATERIALS, 2014, 29 (11) : 1179 - 1185
  • [39] Fabrication and characterisation of porous mullite ceramics from high voltage insulator waste
    Xu, N. N.
    Li, S. J.
    Li, Y. B.
    Yuan, L.
    Zhang, J. L.
    Wang, L.
    Xu, J.
    ADVANCES IN APPLIED CERAMICS, 2015, 114 (02) : 93 - 98
  • [40] Fabrication, properties and nonlinear thermal conductivity model of highly porous mullite ceramics
    Li, Hai-Feng, 1600, Science Press (29):
12345