Solid-Rotor Material Selection for Squirrel-Cage High-Speed Solid-Rotor Induction Machine

被引：0
|
作者：
Lindh, Pia [1 ]
Immonen, Paula [1 ]
Di, Chong [1 ]
Degano, Michele [2 ]
Pyrhonen, Juha [1 ]
机构：
[1] LUT Univ, Sch Energy Syst, Lappeenranta, Finland
[2] Univ Nottingham, Fac Engn, Nottingham, England
来源：
45TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2019) | 2019年
关键词：
Squirrel-cage; solid-rotor; current filtering; simulation;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Squirrel-cage solid-rotor core material selection is investigated using a 1 MW 12000 r/min motor as a case study. Different rotor core materials are analysed: S355, X20Cr13, MoCN315M, Imacro M and AISI430. The mechanical strength of the rotor should naturally be strong enough to withstand the high mechanical stresses caused by the high rotational velocity and the rotor should have high saturation flux density for torque production generation. Finite element models are built in Altair Flux 2D environment. A detailed analysis on the influence of material resistivity on torque production and power factor is carried out. Finally, the motor losses are calculated with sinusoidal supply to see the effect of the rotor core material on the motor efficiency.
引用
收藏
页码：1357 / 1361
页数：5
相关论文
共 50 条
  • [21] SOLID-ROTOR AND COMPOSITE-ROTOR INDUCTION MACHINES
    SARMA, MS
    SONI, GR
    IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, 1972, AES8 (02) : 147 - &
  • [22] Filtered PWM-inverter drive for high-speed solid-rotor induction motors
    Huppunen, J
    Pyrhönen, J
    IAS 2000 - CONFERENCE RECORD OF THE 2000 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-5, 2000, : 1942 - 1949
  • [23] STRAY LOSS IN SOLID-ROTOR INDUCTION MACHINES
    SPOONER, E
    IEE PROCEEDINGS-B ELECTRIC POWER APPLICATIONS, 1982, 129 (04): : 181 - 189
  • [24] Feedforward control of high-speed solid-rotor synchronous reluctance machines with rotor dynamics model
    Park, JD
    Hofmann, H
    Khalizadeh, C
    CONFERENCE RECORD OF THE 2004 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4: COVERING THEORY TO PRACTICE, 2004, : 292 - 298
  • [25] Optimal Design of High-Speed Solid-Rotor Cage Induction Motors Considering Ferromagnetic Materials Behavior and Manufacturing Process
    Zhao, Haisen
    Chu, Chengyang
    Eldeeb, Hassan H.
    Zhan, Yang
    Xu, Guorui
    Mohammed, Osama A.
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2020, 56 (04) : 4345 - 4355
  • [26] Rotor parameters calculation for a solid-rotor induction motor with end rings
    Fu Fengli Shanghai Electrical Apparatus Research Institute
    Electricity, 1991, (01) : 18 - 19
  • [27] Design of a High-Speed Solid-Rotor Induction Machine With an Asymmetric Winding and Suppression of the Current Unbalance by Special Coil Arrangements
    Di, Chong
    Petrov, Ilya
    Pyrhonen, Juha J.
    IEEE ACCESS, 2019, 7 : 83175 - 83186
  • [28] High-Speed High-Output Solid-Rotor Induction-Motor Technology for Gas Compression
    Pyrhonen, Juha
    Nerg, Janne
    Kurronen, Panu
    Lauber, Uwe
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (01) : 272 - 280
  • [29] Evaluation of Rotor-End Factors in Solid-Rotor Induction Motors
    Jagiela, Mariusz
    Garbiec, Tomasz
    IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (01) : 137 - 142
  • [30] Analyzing the effect of the rotor coating on the rotor losses of medium-speed solid-rotor induction motor
    Aho, T.
    Nerg, J.
    Pyrhonen, J.
    2006 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION, VOLS 1-3, 2006, : 103 - +
12345