Dry aerosol jet printing of conductive silver lines on a heated silicon substrate

被引：9
|
作者：
Efimov, A. A. [1 ]
Arsenov, P. V. [1 ]
Protas, N. V. [1 ]
Minkov, K. N. [2 ]
Urazov, M. N. [1 ]
Ivanov, V. V. [1 ]
机构：
[1] Moscow Inst Phys & Technol, Dept Phys & Quantum Elect, Dolgoprudnyi 141700, Russia
[2] Natl Res Univ Higher Sch Econ, Moscow Inst Elect & Math, Moscow, Russia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS | 2018年 / 307卷
关键词：
D O I：
10.1088/1757-899X/307/1/012082
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A new method for dry aerosol jet printing conductive lines on a heated substrate is presented. The method is based on the use of a spark discharge generator as a source of dry nanoparticles and a heating plate for their sintering. This method allows creating conductive silver lines on a heated silicon substrate up to 300 degrees C without an additional sintering step. It was found that for effective sintering lines of silver nanoparticles the temperature of the heated substrate should be about more than 200-250 degrees C. Average thickness of the sintered silver lines was equal to similar to 20 mu m. Printed lines showed electrical resistivity equal to 35 mu Omega.cm, which is 23 times greater than the resistivity of bulk silver.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Printing of silver conductive lines through laser-induced forward transfer
    Florian, C.
    Caballero-Lucas, F.
    Fernandez-Pradas, J. M.
    Ogier, S.
    Winchester, L.
    Karnakis, D.
    Geremia, R.
    Artigas, R.
    Serra, P.
    APPLIED SURFACE SCIENCE, 2016, 374 : 265 - 270
  • [32] Jet printing morphology and rheological characteristics of silver paste electrically conductive adhesives (ECAs)
    Li, Saipeng
    Wang, Dapeng
    Zhou, Jian
    Xue, Feng
    He, Xinyue
    Zhou, Jian
    Xue, Feng
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 271 - 274
  • [33] Ink Jet Printing of Conductive Silver Tracks from Nanoparticle Inks on Mesoporous Substrates
    Schuppert, Anna
    Thielen, Moritz
    Reinhold, Ingo
    Schmidt, Wolfgang A.
    DIGITAL FABRICATION 2011/ NIP27- 27TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES: TECHNICAL PROGRAMS AND PROCEEDINGS, 2011, 2011, : 437 - 440
  • [34] Plasma jet printing of silver patterns on flexible substrates: Conductive properties and control mechanism
    Xue, Jiaqing
    Yu, Deping
    Zhao, Yingxin
    Yue, Xufeng
    Cai, Jianing
    Zhang, Peng
    Peng, Keming
    PLASMA PROCESSES AND POLYMERS, 2024, 21 (10)
  • [35] Effect of viscosity of silver nanoparticle suspension on conductive line patterned by electrohydrodynamic jet printing
    Yu, J. H.
    Kim, S. Y.
    Hwang, J.
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2007, 89 (01): : 157 - 159
  • [36] Direct ink-jet printing and low temperature conversion of conductive silver patterns
    Smith, P. J.
    Shin, D. -Y.
    Stringer, J. E.
    Derby, B.
    Reis, N.
    JOURNAL OF MATERIALS SCIENCE, 2006, 41 (13) : 4153 - 4158
  • [37] Direct ink-jet printing and low temperature conversion of conductive silver patterns
    P. J. Smith
    D.-Y. Shin
    J. E. Stringer
    B. Derby
    N. Reis
    Journal of Materials Science, 2006, 41 : 4153 - 4158
  • [38] Effect of viscosity of silver nanoparticle suspension on conductive line patterned by electrohydrodynamic jet printing
    J.H. Yu
    S.Y. Kim
    J. Hwang
    Applied Physics A, 2007, 89 : 157 - 159
  • [39] The electrical sintering and fusing effects of Aerosol-Jet printed silver conductive line
    He, Chao
    Jin, Ning
    Yu, Haoran
    Lin, Jian
    Ma, Chang-Qi
    MATERIALS LETTERS, 2019, 246 : 5 - 8
  • [40] Investigation of ink modification for aerosol jet printing process on FR-4 substrate
    Hung, Kuan-Yi
    Chang, Yi-Tse
    Chien, Chih-Hsuan
    Ding, Chien-Fang
    Tsai, Ming-Chih
    Young, Hong-Tsu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (3-4): : 1147 - 1156
12345