Dry aerosol jet printing of conductive silver lines on a heated silicon substrate

被引：9
|
作者：
Efimov, A. A. [1 ]
Arsenov, P. V. [1 ]
Protas, N. V. [1 ]
Minkov, K. N. [2 ]
Urazov, M. N. [1 ]
Ivanov, V. V. [1 ]
机构：
[1] Moscow Inst Phys & Technol, Dept Phys & Quantum Elect, Dolgoprudnyi 141700, Russia
[2] Natl Res Univ Higher Sch Econ, Moscow Inst Elect & Math, Moscow, Russia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS | 2018年 / 307卷
关键词：
D O I：
10.1088/1757-899X/307/1/012082
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A new method for dry aerosol jet printing conductive lines on a heated substrate is presented. The method is based on the use of a spark discharge generator as a source of dry nanoparticles and a heating plate for their sintering. This method allows creating conductive silver lines on a heated silicon substrate up to 300 degrees C without an additional sintering step. It was found that for effective sintering lines of silver nanoparticles the temperature of the heated substrate should be about more than 200-250 degrees C. Average thickness of the sintered silver lines was equal to similar to 20 mu m. Printed lines showed electrical resistivity equal to 35 mu Omega.cm, which is 23 times greater than the resistivity of bulk silver.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] Ink-jet printing of silver conductive patterns for flexible electronics
    Kim, D
    Park, J
    Jeong, S
    Moon, J
    DIGITAL FABRICATION 2005, FINAL PROGRAM AND PROCEEDINGS, 2005, : 93 - 95
  • [22] Laser Sintering of Aerosol Jet Printed Conductive Interconnects on Paper Substrate
    Alhendi, Mohammed
    Sivasubramony, Rajesh S.
    Lombardi, Jack, III
    Weerawarne, Darshana L.
    Borgesen, Peter
    Poliks, Mark D.
    Alizadeh, Azar
    2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2019, : 1581 - 1587
  • [23] Optimizing aerosol jet printing process of silver ink for printed electronics
    Agarwala, S.
    Goh, G. L.
    Yeong, W. Y.
    2ND INTERNATIONAL CONFERENCE ON MINING, MATERIAL AND METALLURGICAL ENGINEERING, 2017, 191
  • [24] Inkjet Printing of Nano-Silver Conductive Lines on Polyimide Substrates
    Chan, Chia-Yen
    Shih, Kuan-Cheng
    Huang, Ting-Ming
    2016 11TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT-IAAC 2016), 2016, : 115 - 118
  • [25] Low temperature fabricated conductive lines on flexible substrate by inkjet printing
    Liu, Yu-Feng
    Hwang, Weng-Sing
    Pal, Yen-Fang
    Tsai, Ming-Hsu
    MICROELECTRONICS RELIABILITY, 2012, 52 (02) : 391 - 397
  • [26] Low Temperature Fabricated Conductive Lines on Flexible Substrate by Inkjet Printing
    Liu, Yu-Feng
    Pai, Yen-Fang
    Hwang, Weng-Sing
    IDW'11: PROCEEDINGS OF THE 18TH INTERNATIONAL DISPLAY WORKSHOPS, VOLS 1-3, 2011, : 1285 - 1288
  • [27] Structuring of Conductive Silver Line by Electrohydrodynamic Jet Printing and Its Electrical Characterization
    Lee, Dae-Young
    Lee, Jae-Chang
    Shin, Yun-Soo
    Park, Sung-Eun
    Yu, Tae-U
    Kim, Yong-Jun
    Hwang, Jungho
    ELECTROSTATICS 2007, 2009, 142
  • [28] Highly conductive electronics circuits from aerosol jet printed silver inks
    Skarzynski, Kacper
    Krzeminski, Jakub
    Jakubowska, Malgorzata
    Sloma, Marcin
    SCIENTIFIC REPORTS, 2021, 11 (01)
  • [29] Highly conductive electronics circuits from aerosol jet printed silver inks
    Kacper Skarżyński
    Jakub Krzemiński
    Małgorzata Jakubowska
    Marcin Słoma
    Scientific Reports, 11
  • [30] Aerosol Jet silver printed lines on subsequently bent glass substrates
    Navratil, Jiri
    Pavec, Martin
    Reboun, Jan
    Rericha, Tomas
    Hamacek, Ales
    2017 40TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2017,
12345