Dry aerosol jet printing of conductive silver lines on a heated silicon substrate

被引：9
|
作者：
Efimov, A. A. [1 ]
Arsenov, P. V. [1 ]
Protas, N. V. [1 ]
Minkov, K. N. [2 ]
Urazov, M. N. [1 ]
Ivanov, V. V. [1 ]
机构：
[1] Moscow Inst Phys & Technol, Dept Phys & Quantum Elect, Dolgoprudnyi 141700, Russia
[2] Natl Res Univ Higher Sch Econ, Moscow Inst Elect & Math, Moscow, Russia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS | 2018年 / 307卷
关键词：
D O I：
10.1088/1757-899X/307/1/012082
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A new method for dry aerosol jet printing conductive lines on a heated substrate is presented. The method is based on the use of a spark discharge generator as a source of dry nanoparticles and a heating plate for their sintering. This method allows creating conductive silver lines on a heated silicon substrate up to 300 degrees C without an additional sintering step. It was found that for effective sintering lines of silver nanoparticles the temperature of the heated substrate should be about more than 200-250 degrees C. Average thickness of the sintered silver lines was equal to similar to 20 mu m. Printed lines showed electrical resistivity equal to 35 mu Omega.cm, which is 23 times greater than the resistivity of bulk silver.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Aerosol Jet Printing of Silver Lines with A High Aspect Ratio on A Heated Silicon Substrate
    Efimov, Alexey
    Arsenov, Pavel
    Kornyushin, Denis
    Lizunova, Anna
    Volkov, Ivan
    Ivanov, Victor
    MATERIALS, 2020, 13 (03)
  • [2] Aerosol jet printing on paper substrate with conductive silver nano material
    Chen, Yi-Dan
    Nagarajan, Vijayasarathi
    Rosen, David W.
    Yu, Wenwei
    Huang, Shao Ying
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 58 (58) : 55 - 66
  • [3] Aerosol Jet Printing of Conductive Patterns on Paper Substrate
    Chen, Yi-Dan
    Zhou, Wenshen
    Yu, Wenwei
    Huang, Shao Ying
    PROCEEDINGS OF THE 2020 IEEE INTERNATIONAL CONFERENCE ON COMPUTATIONAL ELECTROMAGNETICS (ICCEM 2020), 2020, : 126 - 127
  • [4] Aerosol Jet Printing of Flexible Transparent Conductive Silver Nanowire Electrodes: Effects of Printing Cycles
    Serbest, Berk
    Kara, Suha Gul
    Alpay, Ramazan
    Ataser, Tugce
    Kinaci, Baris
    Sonmez, Nihan Akin
    Ozcelik, Suleyman
    JOURNAL OF ELECTRONIC MATERIALS, 2025, 54 (02) : 1245 - 1253
  • [5] Aerosol-Jet printing of highly flexible and conductive graphene/silver patterns
    Jabari, Elahe
    Toyserkani, Ehsan
    MATERIALS LETTERS, 2016, 174 : 40 - 43
  • [6] Nanosilver conductive lines made by spray coating and aerosol jet printing technique
    Krzeminski, Jakub
    Wroblewski, Grzegorz
    Dybowska-Sarapuk, Lucja
    Lepak, Sandra
    Jakubowska, Malgorzata
    PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH ENERGY PHYSICS EXPERIMENTS 2017, 2017, 10445
  • [7] Electrical characterization of Aerosol Jet Printing (AJP) deposited conductive silver tracks on organic materials
    Laurent, Ph.
    Stoukatch, S.
    Dupont, F.
    Kraft, M.
    MICROELECTRONIC ENGINEERING, 2018, 197 : 67 - 75
  • [8] Processing of Silicon Anodes by Aerosol Jet Printing
    Schmerling, M.
    Wirth, I.
    Kuegeler, C.
    BATTERIES AND ENERGY TECHNOLOGY (GENERAL) - 221ST ECS MEETING, 2013, 45 (29): : 29 - 34
  • [9] Fabrication of Metallic Lines by Aerosol Jet Printing: Study of the Effect of Substrate Temperature on the Aspect Ratio
    Efimov, Alexey Anatolevich
    Arsenov, Pavel Vladimirovich
    Minkov, Kirill Nikolaevich
    Ivanov, Victor Vladimirovich
    ORIENTAL JOURNAL OF CHEMISTRY, 2018, 34 (06) : 2777 - 2781
  • [10] Direct ink-jet printing of silver nitrate-silver nanowire hybrid inks to fabricate silver conductive lines
    Wu, Jung-Tang
    Hsu, Steve Lien-Chung
    Tsai, Ming-Hsiu
    Liu, Yu-Feng
    Hwang, Weng-Sing
    JOURNAL OF MATERIALS CHEMISTRY, 2012, 22 (31) : 15599 - 15605
12345