Optimisation of antenna array allocation for partial discharge localisation in air-insulated substation

Partial discharge (PD) is the symptom of insulation breakdown in power equipment. The high rising steepness of PD current radiates electromagnetic waves which can be coupled with antenna. In this study, an antenna array is applied to PD detection and localisation in air-insulated substations, in which the locations of PD sources are found with time difference of arrival localisation algorithm. The influences of antenna deployment including the size, aspect ratio and shape of antenna array on localisation accuracy are systematically investigated. Three approaches including Cramer-Rao lower bound, numerical simulation of root of mean square error and experiments are adopted to evaluate the localisation accuracy. Three kinds of antenna arrays with diamond, rectangle and Y shapes are designed for locating the coordinates of PD sources. Their localisation performances are compared by these evaluation approaches, and the optimum antenna configurations for coordinate estimation are derived. The results indicate that the optimum array is dependent on aspect ratio of array size. If the aspect ratio is higher than 0.5, the rectangle array gives minimum localisation error and wide bearing ranges with low error. For array with aspect ratio smaller than 0.25, the diamond array is optimum among the three shapes.