Microstructure and strength of oxidation-bonded porous silicon nitride ceramics

被引：1
|
作者：
Ding, Shuqiang [1 ]
Zeng, Yuping [1 ]
Jiang, Dongliang [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4 | 2007年 / 353-358卷
关键词：
Si3N4; SiO2; porous ceramics; microstructure; strength;
D O I：
10.4028/www.scientific.net/KEM.353-358.503
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An oxidation bonding process was developed to fabricate oxidation-bonded porous silicon nitride (Si3N4) ceramics from alpha-Si3N4 powder in air at 1100-1400 degrees C. Si3N4 particles are bonded by the oxidation-derived silica (SiO2) and the pores derive from the stack of Si3N4 particles and the release of N-2 and SiO gas during the sintering. The microstructure of oxidation-bonded porous Si3N4 ceramics was observed. Moreover, the fracture mechanism was analyzed. Effects of the bonding phases and pores on the flexural strength were investigated. Oxidation-bonded porous Si3N4 ceramics with high flexural strength was obtained by restraining the crystallization of amorphous silica and forming the well-developed necks between Si3N4 particles.
引用
收藏
页码：503 / 506
页数：4
相关论文
共 50 条
  • [41] Microstructure and abrasive wear in silicon nitride ceramics
    Dogan, CP
    Hawk, JA
    WEAR, 2001, 250 : 256 - 263
  • [42] THE INTERGRANULAR MICROSTRUCTURE OF SILICON NITRIDE BASED CERAMICS
    Falk, L. K. L.
    Schneider, N.
    Menke, Y.
    Hampshire, S.
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES III, 2008, 28 (02): : 55 - +
  • [43] Effect of Starting SiC Particle Size on Nitridation and Strength of Silicon Nitride-Bonded Silicon Carbide Ceramics
    Choi, Young-Hoon
    Kim, Young-Wook
    Woo, Sang-Kuk
    Han, In-Sub
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2010, 47 (02) : 157 - 162
  • [44] Microstructure and abrasive wear in silicon nitride ceramics
    Doǧan, C.P.
    Hawk, J.A.
    Wear, 2001, 250-251 (PART 1) : 256 - 263
  • [45] Microstructure control in silicon nitride ceramics - A review
    Mitomo, Mamoru
    Hirosaki, Naoto
    Nishimura, Toshiyuki
    Xie, Rong-Jun
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2006, 114 (1335) : 867 - 872
  • [46] Microstructure and mechanical properties of silicon nitride ceramics
    Qi, LH
    Miao, HZ
    Tien, TY
    PROCEEDINGS OF THE FIRST CHINA INTERNATIONAL CONFERENCE ON HIGH-PERFORMANCE CERAMICS, 2001, : 270 - 273
  • [47] The high temperature oxidation behavior of reaction-bonded porous silicon carbide ceramics
    Zheng, Chuanwei
    Yang, Zhenming
    Zhang, Jinsong
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2010, 24 (01): : 103 - 107
  • [48] Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics
    Nakashima, Yuki
    Zhou, You
    Tanabe, Keisuke
    Arima, Souhei
    Hirao, Kiyoshi
    Ohji, Tatsuki
    Murayama, Norimitsu
    Fukushima, Manabu
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2023, 106 (02) : 1139 - 1148
  • [49] ASH CENOSPHERE FOR POROUS SILICON NITRIDE CERAMICS
    不详
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2009, 68 (02) : 112 - 112
  • [50] Gas Pressure Sintering of Arbitrary Porous Silicon Nitride Ceramics with High Mechanical Strength
    Li, Yong
    Chen, Fei
    Li, Ling
    Zhang, Weiru
    Yu, Honglin
    Shan, Yubo
    Shen, Qiang
    Jiang, Hongyi
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2010, 93 (06) : 1565 - 1568
12345