Microstructure and strength of oxidation-bonded porous silicon nitride ceramics

被引：1
|
作者：
Ding, Shuqiang [1 ]
Zeng, Yuping [1 ]
Jiang, Dongliang [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4 | 2007年 / 353-358卷
关键词：
Si3N4; SiO2; porous ceramics; microstructure; strength;
D O I：
10.4028/www.scientific.net/KEM.353-358.503
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An oxidation bonding process was developed to fabricate oxidation-bonded porous silicon nitride (Si3N4) ceramics from alpha-Si3N4 powder in air at 1100-1400 degrees C. Si3N4 particles are bonded by the oxidation-derived silica (SiO2) and the pores derive from the stack of Si3N4 particles and the release of N-2 and SiO gas during the sintering. The microstructure of oxidation-bonded porous Si3N4 ceramics was observed. Moreover, the fracture mechanism was analyzed. Effects of the bonding phases and pores on the flexural strength were investigated. Oxidation-bonded porous Si3N4 ceramics with high flexural strength was obtained by restraining the crystallization of amorphous silica and forming the well-developed necks between Si3N4 particles.
引用
下载
收藏
页码：503 / 506
页数：4
相关论文
共 50 条
  • [21] Effect of template size on microstructure and strength of porous silicon carbide ceramics
    Eom, Jung-Hye
    Kim, Young-Wook
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2008, 116 (1358) : 1159 - 1163
  • [22] Effect of additive composition on microstructure and strength of porous silicon carbide ceramics
    Eom, Jung-Hye
    Kim, Young-Wook
    JOURNAL OF MATERIALS SCIENCE, 2009, 44 (16) : 4482 - 4486
  • [23] Effect of additive composition on microstructure and strength of porous silicon carbide ceramics
    Jung-Hye Eom
    Young-Wook Kim
    Journal of Materials Science, 2009, 44 : 4482 - 4486
  • [24] Effects of Nitrogen Pressure on Microstructure and Mechanical Performance of Porous Silicon Nitride Ceramics
    Zhang Jun-Xi
    Xu Zhao-Yun
    Wang Bo
    Qin Yi
    Yang Jian-Feng
    Zhao Zhong-Jian
    Hu Wei
    Shi Zhi-Wei
    JOURNAL OF INORGANIC MATERIALS, 2014, 29 (07) : 701 - 705
  • [25] Effect of sintering additives on microstructure and mechanical properties of porous silicon nitride ceramics
    Yang, Jun
    Yang, Jian-Feng
    Shan, Shao-Yun
    Gao, Ji-Qiang
    Ohji, Tatsuki
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (12) : 3843 - 3845
  • [26] Thermal Conductivity Design and Evaluation of Zirconium Phosphate Bonded Silicon Nitride Porous Ceramics
    Wu, Junyan
    Chen, Fei
    Li, Mingzhong
    Shen, Qiang
    Zhang, Lianmeng
    MATERIALS INTEGRATION, 2012, 508 : 21 - 26
  • [27] Preparation of zirconium phosphate bonded silicon nitride porous ceramics with low thermal conductivity
    Chen, Fei
    Wu, Junyan
    Shen, Qiang
    Zhang, Lianmeng
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2015, 43 (03): : 261 - 267
  • [28] Preparation of Silicon Nitride Porous Ceramics
    Liu, Jian
    Liu, Kai
    Wang, Hong-sheng
    Gao, Fang
    Liao, Rong
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 824 - +
  • [29] Microstructure and fracture strength of silicon nitride ceramics consolidated by oscillatory pressure sintering
    Li, Shuang
    Wei, Chuncheng
    Zhou, Lijuan
    Wang, Peng
    Wang, Weiwei
    CERAMICS INTERNATIONAL, 2019, 45 (12) : 15671 - 15675
  • [30] Microstructure and statistical properties of bending strength and fracture toughness of silicon nitride ceramics
    Hohjo, Hiroshi
    Miyata, Takashi
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2013, 79 (800): : 407 - 419
12345