Optimal link design of a six degree of freedom micro parallel robot based on workspace analysis

被引：0

作者：

Stan, Sergiu-Dan ^{[1
]}

Maties, Vistrian ^{[1
]}

Balan, Radu ^{[1
]}

Rusu, Calin ^{[1
]}

Besoiu, Sorin ^{[1
]}

机构：

[1] Tech Univ Cluj Napoca, Dept Mechatron, Cluj Napoca, Romania

来源：

AMC '08: 10TH INTERNATIONAL WORKSHOP ON ADVANCED MOTION CONTROL, VOLS 1 AND 2, PROCEEDINGS | 2008年

关键词：

optimization; hexapod; 6 degree of freedom; Genetic Algorithms;

D O I：

暂无

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

In this paper a mono-objective optimum design procedure for a six-degree of freedom parallel micro robot is outlined by using optimality criterion of workspace and numerical aspects. A mono-objective optimization problem is formulated by referring to a basic performance of parallel robots. Additional objective functions can be used to extend the proposed design procedure to more general but specific design problems. A kinematic optimization was performed to maximize the workspace of the mini parallel robot. Optimization was performed using Genetic Algorithms. It is concluded that the optimal design method is useful for the design of a six degree of freedom micro parallel robot.

引用

页码：637 / 642

页数：6

共 50 条

[31] Design of a Class of Six Degrees of Freedom Parallel Robot Control System
Li, Kaiyue
Pan, Songfeng
Li, Yong
Yang, Yan
2018 CHINESE AUTOMATION CONGRESS (CAC), 2018, : 3618 - 3621
[32] DESIGN OF STATICALLY BALANCED SIX-DEGREE-OF-FREEDOM PARALLEL MECHANISMS BASED ON TENSEGRITY SYSTEM
Shekarforoush, S. M. Mehdi
Eghtesad, Mohammad
Farid, Mehrdad
IMECE2009, VOL 4, 2010, : 245 - 253
[33] Design and Development of a Novel 2-Degree-of-Freedom Parallel Robot
Cheng, Changxi
Huang, Wenkai
Zhang, Chunliang
ROBOTICA, 2020, 38 (01) : 1 - 14
[34] Workspace optimal design of a 2 DOF micro parallel robot using genetic algorithms and simulated annealing optimization methods
Stan, Sergiu-Dan
Maties, Vistrian
Balan, Radu
2007 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS I-V, CONFERENCE PROCEEDINGS, 2007, : 1108 - +
[35] Design and analysis of a six degrees of freedom serial-parallel robotic mechanism with multi-degree of freedom legs
Zhang, Ziwei
Meng, Guoying
INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS, 2018, 15 (06):
[36] Workspace Design for 6 Degree of Freedom Machining Bed
Shah, M. F.
Kausar, Z.
Farooq, S. S.
6TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND CONTROL ENGINEERING (ICMCE 2017), 2018, 1016
[37] Kinematic analysis of a six-degree-of-freedom micromotion parallel mechanism
Jiqiren, 5 (298-302, 308):
[38] Static balancing of a six-degree-of-freedom parallel mechanism with six two-link revolute legs
Santangelo, B.G. (rino.santangelo@inwind.it), 1600, Acta Press (20):
[39] Static balancing of a six-degree-of-freedom parallel mechanism with six two-link revolute legs
Santangelo, BG
Sinatra, R
INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION, 2005, 20 (04): : 222 - 230
[40] On the kinematic analysis of a spatial six-degree-of-freedom parallel manipulator
Vakil, M.
Pendar, H.
Zohoor, H.
Scientia Iranica, 2009, 16 (01) : 1 - 14

← 1 2 3 4 5 →