FULL FIELD MEASUREMENTS OF THE DYNAMIC RESPONSE OF AA6061-T6 ALUMINUM ALLOY UNDER HIGH STRAIN RATE COMPRESSION AND TORSION LOADS

被引:0
|
作者
Owolabi, Gbadebo [1 ]
Odoh, Daniel [1 ]
Odeshi, Akindele [2 ]
Whitworth, Horace [1 ]
机构
[1] Howard Univ, Dept Mech Engn, Washington, DC 20059 USA
[2] Univ Saskatchewan, Dept Mech Engn, Saskatoon, SK S7N 0W0, Canada
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Aluminum alloys exhibit an attractive combination of mechanical and physical properties such as high stiffness and low density, which favors their utilization in many structural applications. Thus, increasing the structural applications of aluminum alloy is the driving force for the need to adequately understand its deformation and failure mechanisms under various types of dynamic loading conditions. In this study, full field plastic deformation of AA6061-T6 aluminum alloy at high strain-rates under compressive and torsion loads are measured using split Hopkinson compression and torsion bars and a high speed digital image correlation system. The stress-strain curves obtained using the high speed digital cameras are compared with results obtained from the elastic waves in the compression and torsion bars. A post deformation analysis of the specimen also shows strain localization along narrow adiabatic shear bands in the AA6061-T6 alloy.
引用
收藏
页码:189 / 197
页数:9
相关论文
共 50 条
  • [41] Strain Rate Sensitivity Behavior of 2219 Aluminum Alloy Under Dynamic Compression
    Xu Yike
    Huang Liang
    Wang Zeyu
    Xu Jiahui
    Zhang Huiping
    Li Jianjun
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (08) : 2963 - 2970
  • [42] Strain Rate Sensitivity Behavior of 2219 Aluminum Alloy Under Dynamic Compression
    Xu, Yike
    Huang, Liang
    Wang, Zeyu
    Xu, Jiahui
    Zhang, Huiping
    Li, Jianjun
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (08): : 2963 - 2970
  • [43] Control of load/displacement responses of AA6061-T6 and T4 circular extrusions under axial compressive loads
    Jin, Shun Yi
    Altenhof, William
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2011, 38 (01) : 1 - 12
  • [44] Response of CMT Welded Aluminum AA5086-H111 to AA6061-T6 Plate with AA4043 Filler for Ballistic
    Srikanth, T.
    Surendran, S.
    Balaganesan, G.
    Manjunath, G. L.
    10TH INTERNATIONAL CONFERENCE ON MARINE TECHNOLOGY (MARTEC 2016), 2017, 194 : 522 - 528
  • [45] Optimizing Diffusion Bonding Parameters in AA6061-T6 Aluminum and AZ80 Magnesium Alloy Dissimilar Joints
    M. Joseph Fernandus
    T. Senthilkumar
    V. Balasubramanian
    S. Rajakumar
    Journal of Materials Engineering and Performance, 2012, 21 : 2303 - 2315
  • [46] Residual stress measurement on AA6061-T6 aluminum alloy friction stir butt welds using contour method
    Liu, Chuan
    Yi, Xiang
    MATERIALS & DESIGN, 2013, 46 : 366 - 371
  • [47] Optimizing Diffusion Bonding Parameters in AA6061-T6 Aluminum and AZ80 Magnesium Alloy Dissimilar Joints
    Fernandus, M. Joseph
    Senthilkumar, T.
    Balasubramanian, V.
    Rajakumar, S.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (11) : 2303 - 2315
  • [48] The Influence of Tool Geometry on the Mechanical Properties and the Microstructure of AA6061-T6 Aluminum Alloy Friction Stir Spot Welding
    Alkhafaji, Amir
    Camas, Daniel
    Lopez-Crespo, Pablo
    Al-Asadi, Hayder
    MATERIALS, 2023, 16 (11)
  • [49] Forming Quality and Microstructure Evolution of AA6061-T6 Aluminum Alloy Joint during Flow Drill Screwing Process
    Huang, Zhi-Chao
    Huang, Guo-Huang
    Shan, Feng-Wu
    Jiang, Yu-Qiang
    Zou, Yun-Qi
    Nie, Xiao-Yong
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (13)
  • [50] Atmospheric pressure plasma oxidation of AA6061-T6 aluminum alloy surface for strong and durable adhesive bonding applications
    Saleema, N.
    Gallant, D.
    APPLIED SURFACE SCIENCE, 2013, 282 : 98 - 104