FULL FIELD MEASUREMENTS OF THE DYNAMIC RESPONSE OF AA6061-T6 ALUMINUM ALLOY UNDER HIGH STRAIN RATE COMPRESSION AND TORSION LOADS

被引:0
|
作者
Owolabi, Gbadebo [1 ]
Odoh, Daniel [1 ]
Odeshi, Akindele [2 ]
Whitworth, Horace [1 ]
机构
[1] Howard Univ, Dept Mech Engn, Washington, DC 20059 USA
[2] Univ Saskatchewan, Dept Mech Engn, Saskatoon, SK S7N 0W0, Canada
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Aluminum alloys exhibit an attractive combination of mechanical and physical properties such as high stiffness and low density, which favors their utilization in many structural applications. Thus, increasing the structural applications of aluminum alloy is the driving force for the need to adequately understand its deformation and failure mechanisms under various types of dynamic loading conditions. In this study, full field plastic deformation of AA6061-T6 aluminum alloy at high strain-rates under compressive and torsion loads are measured using split Hopkinson compression and torsion bars and a high speed digital image correlation system. The stress-strain curves obtained using the high speed digital cameras are compared with results obtained from the elastic waves in the compression and torsion bars. A post deformation analysis of the specimen also shows strain localization along narrow adiabatic shear bands in the AA6061-T6 alloy.
引用
收藏
页码:189 / 197
页数:9
相关论文
共 50 条
  • [11] Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet
    Liu, Xiao Jing
    Zhang, Zhi He
    Ma, Xue Feng
    Li, Chao
    Zhou, Ying Ying
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (11-12): : 4447 - 4464
  • [12] Strain rate effect on tensile behavior of AA6061-T6 friction stir welds
    Kumar, Indrajeet
    Bhattacharya, Anirban
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 35 : 323 - 335
  • [13] Corrosion Behavior of Friction Stir Welded Lap Joints of AA6061-T6 Aluminum Alloy
    Gharavi, Farhad
    Matori, Khamirul Amin
    Yunus, Robiah
    Othman, Norinsan Kamil
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2014, 17 (03): : 672 - 681
  • [14] THE EFFECT OF TEMPERATURE ON FORMABILITY OF AA6061-T6 ALLOY MATERIAL UNDER STRETCHING OPERATION
    Goud, R. Raman
    Rachala, Aryan
    PROCEEDINGS OF THE ASME GAS TURBINE INDIA CONFERENCE, 2019, VOL 2, 2020,
  • [15] Finite Element Analysis of Friction Stir Welded Aluminum Alloy AA6061-T6 Joints
    Serindag, Huseyin Tarik
    Kiral, Binnur Goren
    Kadayifci, Zeki Alper
    MATERIALS TESTING, 2014, 56 (11-12) : 937 - 944
  • [16] Microstructures and fatigue properties of friction stir lap welds in aluminum alloy AA6061-T6
    Xu, Xiaodong
    Yang, Xinqi
    Zhou, Guang
    Tong, Jianhua
    MATERIALS & DESIGN, 2012, 35 : 175 - 183
  • [17] Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld
    Maamar Hakem
    Soltane Lebaili
    Stephane Mathieu
    Djamel Miroud
    Abdelatif Lebaili
    Billel Cheniti
    The International Journal of Advanced Manufacturing Technology, 2019, 102 : 2907 - 2918
  • [18] Corrosion evaluation of friction stir welded lap joints of AA6061-T6 aluminum alloy
    Gharavi, Farhad
    Matori, Khamirul A.
    Yunus, Robiah
    Othman, Norinsan K.
    Fadaeifard, Firouz
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (03) : 684 - 696
  • [19] Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld
    Hakem, Maamar
    Lebaili, Soltane
    Mathieu, Stephane
    Miroud, Djamel
    Lebaili, Abdelatif
    Cheniti, Billel
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (9-12): : 2907 - 2918
  • [20] Application of Response Surface Methodology in optimizing the process parameters of Twist Extrusion process for AA6061-T6 aluminum alloy
    Iqbal, U. Mohammed
    Kumar, V. S. Senthil
    Gopalakannan, S.
    MEASUREMENT, 2016, 94 : 126 - 138