Influence of Mn-Ni alloying elements on surface film and pitting resistance of Cr-Mn austenitic stainless steels

被引：14
|
作者：
Qu, H. P. [1 ]
Chen, H. T. [1 ]
Lang, Y. P. [1 ]
机构：
[1] CISRI, Inst Special Steels, 76 Haidiannan Rd, Beijing, Peoples R China
来源：
CONSTRUCTION AND BUILDING MATERIALS | 2016年 / 125卷
关键词：
Stainless steel; XPS; Argon sputter; Passive film; Pitting potential; PASSIVE FILM; CORROSION BEHAVIOR; HIGH-TEMPERATURE; XPS; CHLORIDE; AES; INCLUSIONS; MANGANESE;
D O I：
10.1016/j.conbuildmat.2016.08.059
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This research focused on surface film and corrosion resistance of three commercial type 200 austenitic stainless steels including L4, L1 and LH with different Mn/Ni mass ratio in Chinese market. X-ray photoelectron spectrum (XPS) results showed that Fe, Cr and Mn oxide layer thickness and passive film thickness were reduced as Mn/Ni mass ratio increased. Mn enrichment was only found in LH passive film. Mn oxide percentage in LH passive film was also the highest. These disadvantages deteriorated pitting resistance of LH, which was proved by anodic polarization result. Mn/Ni mass ratio should not be higher than 1.7 to ensure good corrosion resistance and low raw material cost. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：427 / 437
页数：11
相关论文
共 50 条
  • [31] EFFECT OF CR ON PITTING RESISTANCE OF AUSTENITIC STAINLESS-STEELS
    BRIGHAM, RJ
    CORROSION SCIENCE, 1975, 15 (09) : 579 - 580
  • [32] SUSCEPTIBILITY OF CR-NI-MN STAINLESS-STEELS TO PITTING IN CHLORIDE SOLUTIONS
    LUNARSKA, E
    SZKLARSKASMIALOWSKA, Z
    JANIKCZACHOR, M
    CORROSION, 1975, 31 (07) : 231 - 234
  • [33] MECHANICAL EFFECTS OF SIMULATED PLASMA DISRUPTIONS IN CR-NI AND CR-MN STAINLESS-STEELS
    PIATTI, G
    ZUBLENA, M
    DELTIN, G
    JOURNAL OF NUCLEAR MATERIALS, 1988, 155 : 407 - 411
  • [34] Microstructure, mechanical properties and sensitization of ultra-low nickel Cr-Mn austenitic stainless steels
    Ambade, Sachin P.
    Tembhurkar, Chetan K.
    Patil, Awanikumar
    Tidke, Atul V.
    Shelare, Sagar D.
    Prakash, Chander
    Djukic, Milos B.
    Khosravi, Nima
    Paramasivam, Prabhu
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 4353 - 4365
  • [35] Microstructure, mechanical properties and sensitization of ultra-low nickel Cr-Mn austenitic stainless steels
    Ambade, Sachin P.
    Tembhurkar, Chetan K.
    Patil, Awanikumar
    Tidke, Atul V.
    Shelare, Sagar D.
    Prakash, Chander
    Djukic, Milos B.
    Khosravi, Nima
    Paramasivam, Prabhu
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 4353 - 4365
  • [36] Mechanical properties of austenitic high-nitrogen Cr-Ni and Cr-Mn steels at low temperatures
    Ilola, RJ
    Hanninen, HE
    Ullakko, KM
    ISIJ INTERNATIONAL, 1996, 36 (07) : 873 - 877
  • [37] INFLUENCE OF LITHIUM EXPOSURE ON THE UNIAXIAL TENSILE PROPERTIES OF A CR-MN AUSTENITIC STAINLESS-STEEL
    FENICI, P
    COEN, V
    RUEDL, E
    KOLBE, H
    SASAKI, T
    JOURNAL OF NUCLEAR MATERIALS, 1982, 103 (1-3) : 699 - 702
  • [38] INFLUENCE OF ADDITIONAL ALLOYING AND HEAT-TREATMENT ON THE MECHANICAL-PROPERTIES OF CR-MN STEELS
    TKACHENKO, IF
    BARANOV, AA
    RUSSIAN METALLURGY, 1983, (03): : 116 - 122
  • [39] Effects of Si on oxidation behaviors in Cr-Mn-Ni austenitic stainless steels
    Oshima, Takayuki
    Habara, Yasuhiro
    Kuroda, Kotaro
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4897 - +
  • [40] CONTROLLING THE MARTENSITIC-TRANSFORMATION IN CR-MN AUSTENITIC STEELS UNDER LOAD
    MALINOV, LS
    KONOP, VI
    METAL SCIENCE AND HEAT TREATMENT, 1978, 20 (7-8) : 616 - 621
12345