Improved fatigue properties of 316L stainless steel using glass-forming coatings

被引：0

作者：

Liu, FX ^{[1
]}

Chiang, CL ^{[1
]}

Wu, L ^{[1
]}

Hsieh, YY ^{[1
]}

Yuan, W ^{[1
]}

Chu, JP ^{[1
]}

Liaw, PK ^{[1
]}

Brooks, CR ^{[1
]}

Buchanan, RA ^{[1
]}

机构：

[1] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA

来源：

SURFACE ENGINEERING 2004 - FUNDAMENTALS AND APPLICATIONS | 2005年 / 843卷

关键词：

D O I：

暂无

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effects of the glass-forming coatings on the fatigue behavior of 316L stainless steel were investigated. Films consisting of 47%Zr, 31%Cu, 13%Al and 9%Ni (atomic percent) were deposited onto the stainless steel by magnetron sputtering. The influences of the substrate condition, the surface roughness, the adhesion, and the compressive residual stresses on the fatigue behavior were studied. The applications of the glass-forming coating gave rise to significant improvements in both the fatigue life and the fatigue limit, in comparison with the uncoated steel. Depending on the maximum stress applied to the steel, the fatigue life can be increased by at least 30 times, and the fatigue limit can be elevated by 30%.

引用

页码：131 / 136

页数：6

共 50 条

[31] Influence of SLM Molding Angle on Tensile Properties of 316L Stainless Steel Forming Parts
Chu, Beibei
Zhang, Zhengyan
Yang, Zhiwen
6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018), 2018, 1967
[32] Analysis of texture effects on fatigue behaviour of 316L stainless steel
Villechaise, P
Mineur, M
Mendez, J
JOURNAL DE PHYSIQUE IV, 2001, 11 (PR4): : 311 - 319
[33] Fatigue behaviour of duplex treated AISI 316L stainless steel
Celik, A.
Arslan, Y.
Yetim, A. F.
Efeoglu, I.
KOVOVE MATERIALY-METALLIC MATERIALS, 2007, 45 (01): : 35 - 40
[34] Electrophoretic deposition, microstructure and selected properties of zein/cloves coatings on 316L stainless steel
Ahmad, Khalil
Manzur, Jawad
Tahir, Muhammad
Hussain, Rabia
Khan, Mahmood
Wadood, Abdul
Avcu, Egemen
Rehman, Muhammad Atiq Ur
PROGRESS IN ORGANIC COATINGS, 2023, 176
[35] Influence of cold gas spray processing conditions on the properties of 316L stainless steel coatings
Huang, Jian
Ma, Wenhua
Xie, Yingchun
Fukanum, Hirotaka
Zhang, Kejie
Wang, Gaomin
Huang, Renzhong
SURFACE ENGINEERING, 2019, 35 (09) : 784 - 791
[36] Parylene coatings on stainless steel 316L surface for medical applications - Mechanical and protective properties
Cieslik, Monika
Kot, Marcin
Reczynski, Witold
Engvall, Klas
Rakowski, Wieslaw
Kotarba, Andrzej
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2012, 32 (01): : 31 - 35
[37] Improving Fatigue Properties of 316L Stainless Steel Welded Joints by Surface Spinning Strengthening
Wang, Dongqiqiong
Wang, Qiang
Li, Xiaowu
Zhang, Zhefeng
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2024, 37 (05) : 840 - 854
[38] Improving Fatigue Properties of 316L Stainless Steel Welded Joints by Surface Spinning Strengthening
Dongqiqiong Wang
Qiang Wang
Xiaowu Li
Zhefeng Zhang
Acta Metallurgica Sinica (English Letters), 2024, 37 : 840 - 854
[39] A comprehensive investigation on thermomechanical fatigue failure mechanism and remaining properties of 316L stainless steel
Zhang, Wei
Yin, Peng
Chen, Weijie
Yang, Qiaofa
Liang, Fei
Wang, Bumei
Chang, Le
Zhou, Changyu
ENGINEERING FAILURE ANALYSIS, 2025, 169
[40] Tensile properties of a nanocrystalline 316L austenitic stainless steel
Chen, XH
Lu, J
Lu, L
Lu, K
SCRIPTA MATERIALIA, 2005, 52 (10) : 1039 - 1044

← 1 2 3 4 5 →