The strength of press-glued and screw-glued wood-plywood joints

被引：9
|
作者：
Kurt, R [1 ]
机构：
[1] K Sutcu Imam Univ, Fac Forestry, TR-46060 Kahramanmaras, Turkey
来源：
HOLZ ALS ROH-UND WERKSTOFF | 2003年 / 61卷 / 04期
关键词：
Glue Line; Gusset Plate; Block Shear; Wood Joint; Thickness Tolerance;
D O I：
10.1007/s00107-003-0397-2
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
The effects of screw-gluing and gap-filling phenol resorcinol formaldehyde (GPRF) adhesive using different glue line thicknesses on the shear strength of wood-plywood joints were studied to determine the use of screw-gluing fastening (SG) method and GPRF adhesive. The specimens were manufactured using either SG method with GPRF adhesive and fine threaded drywall screws or press-gluing (PG) method with GPRF adhesive. The Analysis of Covariance (ANCOVA) was used for statistical analyses. The results showed that the strength among fastening methods was significantly affected by the glue line thickness, so the strength decreased as the glue line thickness increased. The SG fastening method was found as effective as the PG method and more effective when thick glue lines present. The method can be successfully used to bond wood to plywood for wooden panels i.e. stressed skin and sandwich panels.
引用
收藏
页码：269 / 272
页数：4
相关论文
共 50 条
  • [41] Evaluation of strength of wood bonded joints of Cryptomeria japonica e Sequoia sempervirens glued with different adhesives
    Iwakiri, Setsuo
    Trianoski, Rosilani
    Franca, Ramiro Faria
    Pereira Goncalves, Thais Alves
    Loiola, Pedro Licio
    Campelo, Samantha Rodrigues
    de Araujo Pontes Farias, Suelen Marina
    [J]. SCIENTIA FORESTALIS, 2015, 43 (105): : 19 - 26
  • [42] Bond line models of glued wood-to-steel plate joints
    Larsson, Gustaf
    Gustafsson, Per Johan
    Serrano, Erik
    Crocetti, Roberto
    [J]. ENGINEERING STRUCTURES, 2016, 121 : 160 - 169
  • [43] Stress distributions in glued wood lap joints subjected to an axial force
    Chui, YH
    Ni, C
    [J]. 5TH WORLD CONFERENCE ON TIMBER ENGINEERING, VOL 2, PROCEEDINGS, 1998, : 190 - 197
  • [44] ADHESION QUALITY OF GLUED JOINTS FROM DIFFERENT COMMERCIAL WOOD SPECIES
    do Nascimento, Alexandre Miguel
    Garcia, Rosilei Aparecida
    Della Lucia, Ricardo Marius
    [J]. CERNE, 2013, 19 (04) : 593 - 601
  • [45] Initial studies of glued wood joints using FBG strain sensors
    Fernandes, J. R. A.
    Passos, D. J.
    Xavier, J.
    Morais, J. J. L.
    Frazao, O.
    [J]. 2014 THIRD MEDITERRANEAN PHOTONICS CONFERENCE, 2014,
  • [46] A Study of Wood Glued Joints Formed by Urea Melamine Formaldehyde Binders
    Tambi A.A.
    Ignatenko S.V.
    Shinkarenko S.Y.
    Kul’kov A.M.
    Grigor’ev I.V.
    Yurkova O.V.
    Sazhin V.E.
    [J]. Polymer Science - Series D, 2019, 12 (01): : 51 - 57
  • [47] Quality evaluation of Cupressus lusitanica Mill. wood end-grain glued joints for edge glued panel production
    Faedo de Almeida, Caio Cesar
    da Cunha, Alexsandro Bayestorff
    Rios, Polliana D'Angelo
    [J]. SCIENTIA FORESTALIS, 2017, 45 (113): : 9 - 19
  • [48] EFFECT OF ANGLE OF GLUED AREA ON TENSILE STRENGTH OF BIRCH PLYWOOD JOINTED WITH SCARF JOINT
    Reh, Roman
    Hruska, Vratislav
    [J]. ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2011, 53 (01): : 43 - 47
  • [49] Shear and tensile strength of narrow glued joint depending on the grain direction of plywood pliesx
    Frolovs, Girts
    Rocens, Karlis
    Sliseris, Janis
    [J]. MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, 2017, 172 : 292 - 299
  • [50] Influence of electrically conductive adhesive amount on shear strength of glued joints
    Hirman, Martin
    Steiner, Frantisek
    [J]. 2015 INTERNATIONAL CONFERENCE ON APPLIED ELECTRONICS (AE), 2015, : 53 - 56
12345