Determination of mode I and mode II fracture toughness of walnut and cherry in TR and RT crack propagation system by the Arcan test

被引：12
|
作者：
Murata, Koji [1 ]
Bachtiar, Erik Valentine [2 ]
Niemz, Peter [2 ,3 ]
机构：
[1] Kyoto Univ, Grad Sch Agr, Sakyo Ku, Kitashirakawa Oiwake Cho, Kyoto, Kyoto 6068502, Japan
[2] ETH, Inst Bldg Mat, Zurich, Switzerland
[3] Bern Univ Appl Sci, Inst Mat & Wood Technol, Burgdorf, Switzerland
来源：
HOLZFORSCHUNG | 2017年 / 71卷 / 12期
基金：
瑞士国家科学基金会;
关键词：
Arcan test; cherry; fracture toughness; walnut; 4-POINT BENDING TESTS; PROCESS ZONE; SPRUCE WOOD; ENERGY;
D O I：
10.1515/hf-2017-0063
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
Two specimen types, each from walnut and cherry wood, were prepared for tangential-radial (TR) and radial-tangential (RT) crack propagation systems at 65% of RH and 20 degrees C before mode I and mode II fracture toughness was determined through Arcan tests. It was found that fracture toughness in mode I is in agreement with literature data. In the mode II test, however, the crack propagated in the direction normal to the shear plane and not parallel to it. The release rate of strain energy in terms of the opening failure in mode II was lower than that in mode I. It can be concluded that it is difficult to determine the fracture toughness of RT or TR propagation in hardwood specimens in mode II.
引用
收藏
页码：985 / 990
页数：6
相关论文
共 50 条
  • [41] Mode II fracture toughness determination of rock and concrete via Modified Direct Shear Test
    Vizini, Vitor Oliveira Santos
    Futai, Marcos Massao
    ENGINEERING FRACTURE MECHANICS, 2021, 257
  • [42] Mode I, mode II, and mixed-mode I/II interlaminar fracture toughness of GFRP influenced by fiber surface treatment
    Rikards, R
    Buchholz, FG
    Bledzki, AK
    Wacker, G
    Korjakin, A
    MECHANICS OF COMPOSITE MATERIALS, 1996, 32 (05) : 439 - 462
  • [43] Mode I Fracture Toughness Determination of Rock and Concrete via Pull-Off Test
    Vítor Oliveira Santos Vizini
    Marcos Massao Futai
    Rock Mechanics and Rock Engineering, 2023, 56 : 1305 - 1319
  • [44] Mode I Fracture Toughness Determination of Rock and Concrete via Pull-Off Test
    Santos Vizini, Vitor Oliveira
    Futai, Marcos Massao
    ROCK MECHANICS AND ROCK ENGINEERING, 2023, 56 (02) : 1305 - 1319
  • [45] Mode I fracture toughness determination and environmental durability evaluation of adhesive bonds by wedge test
    Takeda, Tomo
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2023, 127
  • [46] Determining rock fracture toughness Mode-I using a pulsed laser scanning during the crack propagation
    Tan, Yi
    Zeng, Jie
    Chen, Qiusong
    Majdi, Ali
    Khadimallah, Mohamed Amine
    Ali, H. Elhosiny
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2022, 46 (15) : 20950 - 20959
  • [47] Study of mode I crack dynamic propagation behaviour and rock dynamic fracture toughness by using SCT specimens
    Dong, Y. Q.
    Zhu, Z. M.
    Zhou, L.
    Ying, P.
    Wang, M.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (08) : 1810 - 1822
  • [48] Trajectories for crack propagation in limestone rocks under mixed mode I-II fracture
    Al-Shayea, NA
    CONTRIBUTION OF ROCK MECHANICS TO THE NEW CENTURY, VOLS 1 AND 2, 2004, : 959 - 964
  • [49] On crack propagation of I-II mixed mode fracture in concrete by means of photoelastic coatings
    Dong Wei
    Wu Zhimin
    Zhao Yanhua
    Yi Fumin
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII, 2010, 417-418 : 809 - 812
  • [50] Determination of mode II toughness of granite by using SCC test
    Jung, Y.
    Park, E.
    Kim, H.
    ROCK MECHANICS AND ROCK ENGINEERING: FROM THE PAST TO THE FUTURE, VOL 1, 2016, : 271 - 276
12345