Determination of mode I and mode II fracture toughness of walnut and cherry in TR and RT crack propagation system by the Arcan test

被引：12

作者：

Murata, Koji ^{[1
]}

Bachtiar, Erik Valentine ^{[2
]}

Niemz, Peter ^{[2
,3
]}

机构：

[1] Kyoto Univ, Grad Sch Agr, Sakyo Ku, Kitashirakawa Oiwake Cho, Kyoto, Kyoto 6068502, Japan

[2] ETH, Inst Bldg Mat, Zurich, Switzerland

[3] Bern Univ Appl Sci, Inst Mat & Wood Technol, Burgdorf, Switzerland

来源：

HOLZFORSCHUNG | 2017年 / 71卷 / 12期

基金：

瑞士国家科学基金会;

关键词：

Arcan test; cherry; fracture toughness; walnut; 4-POINT BENDING TESTS; PROCESS ZONE; SPRUCE WOOD; ENERGY;

D O I：

10.1515/hf-2017-0063

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Two specimen types, each from walnut and cherry wood, were prepared for tangential-radial (TR) and radial-tangential (RT) crack propagation systems at 65% of RH and 20 degrees C before mode I and mode II fracture toughness was determined through Arcan tests. It was found that fracture toughness in mode I is in agreement with literature data. In the mode II test, however, the crack propagated in the direction normal to the shear plane and not parallel to it. The release rate of strain energy in terms of the opening failure in mode II was lower than that in mode I. It can be concluded that it is difficult to determine the fracture toughness of RT or TR propagation in hardwood specimens in mode II.

引用

页码：985 / 990

页数：6

共 50 条

[21] Mode-II fracture toughness and crack propagation of pultruded carbon Fiber-Epoxy composites
Yan, Xiaoqiang
Guo, Xiaoming
Gao, Yifeng
Lin, Yuan
Zhang, Nana
Zhao, Qilin
ENGINEERING FRACTURE MECHANICS, 2023, 279
[22] Some comments on the Arcan mixed-mode (I/II) test specimen
Greer, J. M., Jr.
Dorman, S. E. Galyon
Hammond, M. J.
ENGINEERING FRACTURE MECHANICS, 2011, 78 (09) : 2088 - 2094
[23] Fracture toughness of polycrystalline tungsten under mode I and mixed mode I/II loading
Margevicius, RW
Riedle, J
Gumbsch, P
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 270 (02): : 197 - 209
[24] CRACK PROPAGATION IN THE HUMAN BONE. MODE I OF FRACTURE
Craciun, E. M.
Rabaea, A.
Popa, M. F.
Mihailov, C. I.
ANALELE STIINTIFICE ALE UNIVERSITATII OVIDIUS CONSTANTA-SERIA MATEMATICA, 2018, 26 (02): : 59 - 70
[25] Simulation of mixed mode I-II crack propagation in concrete using toughness-based crack initiation-propagation criterion with modified fracture energy
Li, Zhuheng
Gong, Yujie
Chen, Fengjuan
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 123
[26] Mode I fracture toughness estimation of wood by DCB test
Yoshihara, Hiroshi
Kawamura, Takuji
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (11) : 2105 - 2113
[27] Dynamic Mode I and Mode II Crack Propagation in Fiber Reinforced Composites
Bruno, Domenico
Greco, Fabrizio
Lonetti, Paolo
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2009, 16 (06) : 442 - 455
[28] ISRM Suggested Method for the Determination of Mode II Fracture Toughness
Tobias Backers
Ove Stephansson
Rock Mechanics and Rock Engineering, 2012, 45 : 1011 - 1022
[29] ISRM Suggested Method for the Determination of Mode II Fracture Toughness
Backers, Tobias
Stephansson, Ove
ROCK MECHANICS AND ROCK ENGINEERING, 2012, 45 (06) : 1011 - 1022
[30] Determination and Simulation of the Mode I Fracture Toughness of Bamboo Scrimber
Wu, Guofang
Gong, Yingchun
Zhong, Yong
Ren, Haiqing
BIORESOURCES, 2019, 14 (03) : 6811 - 6821

← 1 2 3 4 5 →