Determination of mode I and mode II fracture toughness of walnut and cherry in TR and RT crack propagation system by the Arcan test

被引：12

作者：

Murata, Koji ^{[1
]}

Bachtiar, Erik Valentine ^{[2
]}

Niemz, Peter ^{[2
,3
]}

机构：

[1] Kyoto Univ, Grad Sch Agr, Sakyo Ku, Kitashirakawa Oiwake Cho, Kyoto, Kyoto 6068502, Japan

[2] ETH, Inst Bldg Mat, Zurich, Switzerland

[3] Bern Univ Appl Sci, Inst Mat & Wood Technol, Burgdorf, Switzerland

来源：

HOLZFORSCHUNG | 2017年 / 71卷 / 12期

基金：

瑞士国家科学基金会;

关键词：

Arcan test; cherry; fracture toughness; walnut; 4-POINT BENDING TESTS; PROCESS ZONE; SPRUCE WOOD; ENERGY;

D O I：

10.1515/hf-2017-0063

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Two specimen types, each from walnut and cherry wood, were prepared for tangential-radial (TR) and radial-tangential (RT) crack propagation systems at 65% of RH and 20 degrees C before mode I and mode II fracture toughness was determined through Arcan tests. It was found that fracture toughness in mode I is in agreement with literature data. In the mode II test, however, the crack propagated in the direction normal to the shear plane and not parallel to it. The release rate of strain energy in terms of the opening failure in mode II was lower than that in mode I. It can be concluded that it is difficult to determine the fracture toughness of RT or TR propagation in hardwood specimens in mode II.

引用

页码：985 / 990

页数：6

共 50 条

[1] Evaluation of mode I fracture toughness of cortical bone tissue in the RL crack propagation system
Pereira, F. A. M.
de Moura, M. F. S. F.
Dourado, N.
Morais, J. J. L.
Dias, M. I. R.
CIENCIA & TECNOLOGIA DOS MATERIAIS, 2014, 26 (02): : 96 - 101
[2] The cellular level mode I fracture behaviour of spruce and birch in the RT crack propagation system
Tukiainen, Pekka
Hughes, Mark
HOLZFORSCHUNG, 2016, 70 (02) : 157 - 165
[3] Effect of polypropylene fibers on the mode I, mode II, and mixed-mode fracture toughness and crack propagation in fiber-reinforced concrete
Jorbat, Mitra Hatami
Hosseini, Mehdi
Mahdikhani, Mahdi
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
[4] Research on Test of Fracture Toughness and Fracture Criterion of Crack of mixed mode I and II of Steel Fiber Concrete
Zhang, Hongda
Xu, Xinsheng
CONSTRUCTION AND URBAN PLANNING, PTS 1-4, 2013, 671-674 : 1688 - 1691
[5] Successive Measurements of Fracture Toughness in Mode I and Mode II with a Single Specimen I. Effects of test order on fracture toughness
Suzuki, Naoyuki
Shirakura, Ryouta
MOKUZAI GAKKAISHI, 2010, 56 (04): : 227 - 234
[6] The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness
Valean, Cristina
Marsavina, Liviu
Marghitas, Mihai
Linul, Emanoil
Razavi, Nima
Berto, Filippo
Brighenti, Roberto
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1, 2020, 28 : 1134 - 1139
[7] Differences Between Mode I and Mode II Crack Propagation
K. B. Broberg
pure and applied geophysics, 2006, 163 : 1867 - 1879
[8] Differences between mode I and mode II crack propagation
Broberg, K. B.
PURE AND APPLIED GEOPHYSICS, 2006, 163 (09) : 1867 - 1879
[9] On fracture initiation toughness and crack sharpness for Mode II cracks
Trapper, P.
Volokh, K. Y.
ENGINEERING FRACTURE MECHANICS, 2009, 76 (09) : 1255 - 1267
[10] Computational determination of mode II fracture toughness of concrete
Shawky, A.A.
Yehia, N.A.B.
Ibrahim, M.M.
Journal of Engineering and Applied Science, 2001, 48 (01): : 105 - 120

← 1 2 3 4 5 →