Influence of heat treatment on microstructure and mechanical properties of titanium alloy grade TI6AL4V

被引：0
|
作者：
Bogucki, R. [1 ]
Hytros, E. [1 ]
机构：
[1] Cracow Univ Technol, Fac Mat Sci & Phys, Inst Mat Engn, Al Jana Pawla II 37, PL-31864 Krakow, Poland
来源：
DEVELOPMENT OF ECO-FRIENDLY COMPOSITE MATERIALS BASED ON GEOPOLYMER MATRIX AND REINFORCED WITH WASTE FIBERS | 2019年 / 706卷
关键词：
PHASE-TRANSFORMATIONS; KINETICS;
D O I：
10.1088/1757-899X/706/1/012014
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
In this work, the effect of heat treatment on the control of the volume share of a phase in a two-phase titanium alloy alpha + beta from the Ti6Al4V grade was analyzed. The applied heat treatments resulted in obtaining a volume share of alpha phase in the range of 60% to 96%. The highest hardness was obtained with a sample share 88% a phase, which was characterized by a microstructure consisting of grains of alpha phase and beta. phase regions of the phase precipitates of alpha'.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Microstructural Influence on Mechanical Properties in Plasma Microwelding of Ti6Al4V Alloy
    Baruah, M.
    Bag, S.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (11) : 4718 - 4728
  • [42] Microstructure and mechanical properties of Ti6Al4V alloy prepared by oscillatory pressure sintering
    Wei, Jiarui
    Liu, Mabao
    Zhang, Wei
    Zhou, Qihang
    Wu, Pengfei
    Sun, Yang
    Xia, Hongyan
    MATERIALS LETTERS, 2024, 357
  • [43] Mechanical Properties and Microstructure of DMLS Ti6Al4V Alloy Dedicated to Biomedical Applications
    Mierzejewska, Zaneta Anna
    Hudak, Radovan
    Sidun, Jaroslaw
    MATERIALS, 2019, 12 (01)
  • [44] Microstructure and Mechanical Properties of Ti6Al4V Alloy Consolidated by Different Sintering Techniques
    Doan Dinh Phuong
    Luong Van Duong
    Nguyen Van Luan
    Nguyen Ngoc Anh
    Pham Van Trinh
    METALS, 2019, 9 (10)
  • [45] Effects of deformation conditions on the microstructure, texture and mechanical properties of Ti6Al4V alloy
    Zhang, Guihua
    Jiang, Haitao
    Tian, Shiwei
    Zhang, Yun
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
  • [46] Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy
    Balla, Vamsi Krishna
    Soderlind, Julie
    Bose, Susmita
    Bandyopadhyay, Amit
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2014, 32 : 335 - 344
  • [47] INFLUENCE OF ANISOTROPY ON THE VISCOPLASTIC PROPERTIES OF A HOT ROLLED Ti6Al4V TITANIUM ALLOY
    Mocko, W.
    Kostrzewski, C.
    Brodecki, A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (01) : 403 - 411
  • [48] Effect of hydrogenation on microstructure and mechanical properties of Ti-6Al-4V titanium alloy
    Zhou, Li
    Liu, Huijie
    ADVANCED ENGINEERING MATERIALS III, PTS 1-3, 2013, 750-752 : 596 - 602
  • [49] Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy
    Moussaoui, Kamel
    Mousseigne, Michel
    Senatore, Johanna
    Chieragatti, Remy
    Lamesle, Pascal
    METALS, 2015, 5 (03): : 1148 - 1162
  • [50] THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR WELDED TI6AL4V TITANIUM ALLOY UNDER beta TRANSUS TEMPERATURE
    Ji, S. D.
    Zhuo, B.
    Gao, S. S.
    Huang, Y. X.
    Zhang, L. G.
    Li, J. Z.
    Ma, Y. N.
    ENGINEERING REVIEW, 2015, 35 (01) : 27 - 31
12345