Influence of heat treatment on microstructure and mechanical properties of titanium alloy grade TI6AL4V

被引：0
|
作者：
Bogucki, R. [1 ]
Hytros, E. [1 ]
机构：
[1] Cracow Univ Technol, Fac Mat Sci & Phys, Inst Mat Engn, Al Jana Pawla II 37, PL-31864 Krakow, Poland
来源：
DEVELOPMENT OF ECO-FRIENDLY COMPOSITE MATERIALS BASED ON GEOPOLYMER MATRIX AND REINFORCED WITH WASTE FIBERS | 2019年 / 706卷
关键词：
PHASE-TRANSFORMATIONS; KINETICS;
D O I：
10.1088/1757-899X/706/1/012014
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
In this work, the effect of heat treatment on the control of the volume share of a phase in a two-phase titanium alloy alpha + beta from the Ti6Al4V grade was analyzed. The applied heat treatments resulted in obtaining a volume share of alpha phase in the range of 60% to 96%. The highest hardness was obtained with a sample share 88% a phase, which was characterized by a microstructure consisting of grains of alpha phase and beta. phase regions of the phase precipitates of alpha'.
引用
收藏
页数：6
相关论文
共 50 条
  • [11] Microstructure and Mechanical Properties of Ti6Al4V Alloy Electron Beam Weldment at Varying Heat Treatment conditions
    M. Gopalakrishna Pillai
    P. S. Sreejith
    R. K. Gupta
    Bhanu Pant
    N. Dileep
    Transactions of the Indian Institute of Metals, 2020, 73 : 1879 - 1890
  • [12] Microstructure and Mechanical Properties of Ti6Al4V Alloy Electron Beam Weldment at Varying Heat Treatment conditions
    Pillai, M. Gopalakrishna
    Sreejith, P. S.
    Gupta, R. K.
    Pant, Bhanu
    Dileep, N.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (07) : 1879 - 1890
  • [13] Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting
    Muhammad Waqas
    Dingyong He
    Yude Liu
    Saleem Riaz
    Farkhanda Afzal
    Journal of Materials Engineering and Performance, 2023, 32 : 680 - 694
  • [14] Tailoring the Microstructure and Mechanical Properties of Titanium Alloy Ti6Al4V Forgings with Different Combinations of Thermo-Mechanical Processing and Heat Treatment Cycles
    Pravendra Pratap Singh
    R. K. Gupta
    V. Anil Kumar
    Ravi C. Gundakaram
    Satish Kumar Singh
    Transactions of the Indian National Academy of Engineering, 2021, 6 (3) : 839 - 855
  • [15] Investigation on the microstructure and mechanical properties of Ti6Al4V titanium alloy electron beam welding joint
    Zhao, Xilong
    Lu, Xinhong
    Wang, Kun
    He, Feng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (06) : 2957 - 2966
  • [16] Influence of Laser Heat Treatment on Machinability of Ti6Al4V Alloy
    Telrandhe, Sagar
    Saxena, Ashish K.
    Sutar, Pavan
    Mishra, Sushil
    44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, 2016, 5 : 282 - 294
  • [17] Influence of heat treatment on the microstructure and properties of Ti-6Al-4V titanium alloy by laser rapid forming
    Zhang Shuangyin
    Lin Xin
    Chen Jing
    Huang Weidong
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (07) : 1263 - 1266
  • [18] Effect of heat input in pulsed Nd:YAG laser welding of titanium alloy (Ti6Al4V) on microstructure and mechanical properties
    Pramod Kumar
    Amar Nath Sinha
    Welding in the World, 2019, 63 : 673 - 689
  • [19] Effects of helium implantation on microstructure and mechanical properties of Ti6Al4V alloy
    Chen, Shan-Hua
    Wu, Yong
    Schumacher, G.
    Cailiao Gongcheng/Journal of Materials Engineering, 2010, (05): : 25 - 29
  • [20] Microstructure and mechanical properties of selective laser melted Ti6Al4V alloy
    Losertova, M.
    Kubes, V.
    27TH JOINT SEMINAR DEVELOPMENT OF MATERIALS SCIENCE IN RESEARCH AND EDUCATION, 2017, 266
12345