Influence of heat treatment on microstructure and mechanical properties of titanium alloy grade TI6AL4V

被引：0
|
作者：
Bogucki, R. [1 ]
Hytros, E. [1 ]
机构：
[1] Cracow Univ Technol, Fac Mat Sci & Phys, Inst Mat Engn, Al Jana Pawla II 37, PL-31864 Krakow, Poland
来源：
DEVELOPMENT OF ECO-FRIENDLY COMPOSITE MATERIALS BASED ON GEOPOLYMER MATRIX AND REINFORCED WITH WASTE FIBERS | 2019年 / 706卷
关键词：
PHASE-TRANSFORMATIONS; KINETICS;
D O I：
10.1088/1757-899X/706/1/012014
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
In this work, the effect of heat treatment on the control of the volume share of a phase in a two-phase titanium alloy alpha + beta from the Ti6Al4V grade was analyzed. The applied heat treatments resulted in obtaining a volume share of alpha phase in the range of 60% to 96%. The highest hardness was obtained with a sample share 88% a phase, which was characterized by a microstructure consisting of grains of alpha phase and beta. phase regions of the phase precipitates of alpha'.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Influence of Cryogenic Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy
    Fatih Hayati Çakir
    Osman Nuri Çelik
    [J]. Journal of Materials Engineering and Performance, 2020, 29 : 6974 - 6984
  • [2] Influence of Cryogenic Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy
    Cakir, Fatih Hayati
    Celik, Osman Nuri
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (10) : 6974 - 6984
  • [3] Effect of Different Heat Treatments on Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy
    Liu Wanying
    Lin Yuanhua
    Chen Yuhai
    Shi Taihe
    Singh, Ambrish
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (03) : 634 - 639
  • [4] Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling
    Ozyurek, Dursun
    Tekeli, Suleyman
    [J]. HIGH TEMPERATURE MATERIALS AND PROCESSES, 2011, 30 (1-2) : 175 - 180
  • [5] Influence of the Structure on the Mechanical Properties of Rods Made of Ti6Al4V Titanium Alloy
    Egorova, Yu. B.
    Davydenko, L.V.
    Chibisova, E.V.
    Chelpanov, A.V.
    Karataeva, E.S.
    [J]. Metal Science and Heat Treatment, 2024, 66 (5-6) : 330 - 337
  • [6] Influence of heat treatment processes on microstructure evolution, tensile and tribological properties of Ti6Al4V alloy
    Elshaer, Ramadan N.
    El-Hadad, Shimaa
    Nofal, Adel
    [J]. SCIENTIFIC REPORTS, 2023, 13 (01)
  • [7] Influence of heat treatment processes on microstructure evolution, tensile and tribological properties of Ti6Al4V alloy
    Ramadan N. Elshaer
    Shimaa El-Hadad
    Adel Nofal
    [J]. Scientific Reports, 13
  • [8] Study on Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy Joint with Ultrasonic Consolidation
    Zhu, Zhengqiang
    Li, Mingfeng
    Su, Zhanzhan
    Zhang, Deqin
    Zhang, Yifu
    [J]. TRANSACTIONS ON INTELLIGENT WELDING MANUFACTURING, VOL I, NO. 1 2017, 2018, 1 (01): : 120 - 129
  • [9] The heat treatment influence on the structure and mechanical properties of Ti6Al4V alloy manufactured by SLM technology
    Kiel-Jamrozik, Marta
    Jamrozik, Wojciech
    Witkowska, Ilona
    [J]. INNOVATIONS IN BIOMEDICAL ENGINEERING, 2018, 623 : 319 - 327
  • [10] Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting
    Waqas, Muhammad
    He, Dingyong
    Liu, Yude
    Riaz, Saleem
    Afzal, Farkhanda
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (02) : 680 - 694
12345