Design and fabrication of low-cost X-ray mirrors

被引：0
|
作者：
Ahmad, A
Engelhaupt, D
Feng, C
Li, Y
机构：
[1] Center for Applied Optics, University of Alabama in Huntsville, Huntsville, AL 35899
来源：
OPTICS AND LASER TECHNOLOGY | 1996年 / 28卷 / 07期
关键词：
grazing-incidence X-ray optics; optomechanical design; finite element analysis; diamond machining; nickel plating; replication;
D O I：
10.1016/S0030-3992(96)00023-0
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
Traditional X-ray mirrors made from Zerodur and silicon carbide ave quite expensive because of the fabrication cost involved in achieving a very high surface finish of the order of 15 Angstrom or better. The cost of X-ray mirrors can be greatly reduced by using replication methods for producing the grazing-incidence type mirrors. This paper presents the optical and optomechanical design for a Wolter type I mirror and its mount, and the fabrication method used to produce a low-cost replicated nickel mirror. The finite element analysis results for this mirror ave also presented. The design and fabrication steps for the aluminium master mandrel used for replication are also discussed. A surface finish of better than 15 Angstrom was achieved for a such an electroformed mirror with a wall thickness of only 1 mm. Copyright (C) 1996 Elsevier Science Ltd.
引用
收藏
页码：555 / 560
页数：6
相关论文
共 50 条
  • [1] System design of a low-cost digital x-ray detector
    Mann, Ryan
    Ghanbarzadeh, Sina
    Karim, Karim S.
    [J]. 2014 IEEE CANADA INTERNATIONAL HUMANITARIAN TECHNOLOGY CONFERENCE (IHTC), 2014,
  • [2] Low-cost X-ray detectors
    Safa Kasap
    [J]. Nature Photonics, 2015, 9 : 420 - 421
  • [3] Low-cost X-ray detectors
    Kasap, Safa
    [J]. NATURE PHOTONICS, 2015, 9 (07) : 420 - 421
  • [4] Design and fabrication of prototype piezoelectric adjustable X-ray mirrors
    Walker, Julian
    Liu, Tianning
    Tendulkar, Mohit
    Burrows, David N.
    DeRoo, Casey T.
    Allured, Ryan
    Hertz, Edward N.
    Cotroneo, Vincenzo
    Reid, Paul B.
    Schwartz, Eric D.
    Jackson, Thomas N.
    Trolier-McKinstry, Susan
    [J]. OPTICS EXPRESS, 2018, 26 (21): : 27757 - 27772
  • [5] Design, fabrication, and study of wideband multilayer X-ray mirrors
    Kozhevnikov, I. V.
    Voronov, A. S.
    Roshchin, B. S.
    Asadchikov, V. E.
    Mednikov, K. N.
    Pirozhkov, A. S.
    Ragozin, E. N.
    Wang, Zh.
    Zhong, Zh.
    Wang, F.
    [J]. CRYSTALLOGRAPHY REPORTS, 2006, 51 (06) : 1075 - 1081
  • [6] Design, fabrication, and study of wideband multilayer X-ray mirrors
    I. V. Kozhevnikov
    A. S. Voronov
    B. S. Roshchin
    V. E. Asadchikov
    K. N. Mednikov
    A. S. Pirozhkov
    E. N. Ragozin
    Zh. Wang
    Zh. Zhong
    F. Wang
    [J]. Crystallography Reports, 2006, 51 : 1075 - 1081
  • [7] Fabrication of Low-Cost Plastic Micromolds for Microfluidic Systems using X-ray LIGA
    Phatthanakun, R.
    Promwikorn, S.
    Pummara, W.
    Sriphung, C.
    Sutapun, B.
    Chomnawang, N.
    [J]. 2014 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING/ELECTRONICS, COMPUTER, TELECOMMUNICATIONS AND INFORMATION TECHNOLOGY (ECTI-CON), 2014,
  • [8] X-ray spectrometer with a low-cost SiC photodiode
    Zhao, S.
    Lioliou, G.
    Barnett, A. M.
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2018, 887 : 138 - 143
  • [9] Fabrication of X-ray mirrors for synchrotron applications
    Thiess, H.
    Lasser, H.
    Siewert, F.
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2010, 616 (2-3): : 157 - 161
  • [10] Fabrication of Lightweight Silicon X-ray Mirrors
    Riveros, Raul E.
    Allgood, Kim D.
    Biskach, Michael P.
    DeVita, Tabatha A.
    Hlinka, Michal
    Kearney, John D.
    Numata, Ai
    Zhang, William W.
    [J]. SPACE TELESCOPES AND INSTRUMENTATION 2022: ULTRAVIOLET TO GAMMA RAY, 2022, 12181
12345